Modelling of the Nonlinear Behavior of Compatibilized Polyethylene/Polyamide Blends in Shear and Extensional Flows

We have studied the effect of the amount Φ_c of a reactive compatibilizer on the rheological properties of a polyethylene/polyamide blend, under steady shear and transient extensional flows. Here, we propose to describe the viscosity η(γ) and the first normal stress coefficient γ₁(γ) using a Carreau‐type power‐law model, which is a three‐parameter model. A single model is sufficient to express the behavior of γ₁(γ) On the other hand, the complete η(γ) curve is described by the superposition of two Carreau models, in relation to the presence of two relaxation mechanisms. Moreover, the extentional viscosity η_E(?), estimated using the end pressure drop observed in capillary flow experiments, is expressed by a two‐parameter power‐law model.     

Polyacrylic acid macromolecule—complexed zinc phosphate crystal conversion coatings

When water-soluble polyacrylic acid (PAA) macromolecules are introduced into zinc phosphating liquids, significant improvements in the yield of conventional zinc phosphate conversion films deposited on carbon steel surfaces are obtained. The improvements include controllability of crystal dimensions, degree of crystallinity, and coating weight. The conversion layer formed is a composite microstructure consisting of a bulk PAA polymer and complexed PAA continuously overlaying a uniform array of fine dense zinc phosphate crystals. Interfacial studies of the composite layer using infrared spectroscopy, energy-dispersive X-ray spectrometry associated with scanning electron microscopy, and X-ray photoelectron spectroscopy indicated that the functional carboxylic acid groups in the PAA molecules were strongly chemisorbed by the Zn atoms at the outermost surface sites of the crystal layers. The intermolecular bridging action of the surface Zn atoms which connect the PAA and the zinc phosphate crystal layers results in good adhesion at the PAA–crystal interfaces. In addition, the plasticized complex formation plays an essential role in increasing the stiffness and the ductility of the normally conventional crystal films. The flexibility of the complex coating surface and the thickness and surface roughness of the thin PAA overlayer all affect the adhesive force at the interface between the organic polymer topcoat and the complexed coating.     

Stress–Strain Behavior of Nicalon-Fiber-Reinforced Calcium Aluminosilicate Composites under Tensile Fatigue Conditions

The unusual stress–strain hysteresis loop shape exhibited by ceramic-matrix composites under cyclic loading has previously been explained as a result of either strain rate dependence of the frictional shear stress or crack closure. This investigation has determined that the response is due to neither mechanism. Instead, it is proposed that a variation of interfacial shear strength occurs during each cycle. A static coefficient of friction dominates immediately after loading or unloading. A much lower dynamic coefficient of friction operates once fiber sliding begins. This dynamic coefficient appears to be very dependent on surface roughness.     

Electrodialytic extraction of Cu,Pb and Cl from municipal solid waste incineration fly ash suspended in water

The possibility of using fly ash from municipal solid waste incineration (MSWI) in, for example, concrete is considered. MSWI fly ash, however, has too high a concentration of heavy metals, which may cause leaching problems during use or problems with waste handling at the end of the lifetime of the concrete. The Cl content in MSWI fly ash is also too high and will cause corrosion problems in reinforced concrete. The possibility of removing some of the unwanted heavy metals (Cu and Pb) together with Cl from an MSWI fly ash suspended in water using an electrodialytic separation method was investigated. The removal of Pb and Cu was found to be highly pH dependent and the highest contents removed were 41 and 90%, respectively. The Cu concentration of the ash decreased from 2200 to 860 mg kg^?1 but the Pb concentration increased from 8560 to 16 800 mg kg^?1, showing that Pb is mainly found in the ash fraction that is least soluble. Hence electrodialytic treatment of the ash suspended in water is not a solution to improve the ash quality in terms of Pb. The water‐soluble Cl content per unit weight of the original ash was 12.4%. The removal of water‐soluble Cl was efficient and >98% of Cl was removed (calculated on the basis of mean initial and final concentrations). This result indicates that electrodialytic extraction may be a method that can be used for the removal of Cl from ash prior to its utilization in concrete. Copyright © 2006 Society of Chemical Industry     

Dehydrogenation of Light Alkanes Over Rhenium Catalysts on Conventional and Mesoporous MFI Supports

Recently, Re/HZSM-5 (Si/Al = 15) was shown to be an efficient catalyst for ethane dehydrogenation and aromatization at 823 K and atmospheric pressure. In this reaction, the major initial products were benzene, toluene and xylene (BTX), but increasing amounts of ethene were produced with time on stream due to deactivation of the catalyst. We show that by use of rhenium impregnated MFI supports with very few or no acidic sites (Si/Al > 500), highly selective ethane dehydrogenation catalysts are obtained with ethene selectivities of 98%. By use of mesoporous MFI supports (Si/Al >500) the lifetime of the catalyst appears to be slightly improved compared to conventional MFI crystals. The beneficial effect of a mesoporous MFI support is convincingly demonstrated in propane dehydrogenation, where both conversion and selectivities on the mesoporous MFI (Si/Al > 500) impregnated with Re are significantly higher than on Re supported on a comparable conventional MFI support.     

What defense doesSchouwia purpurea (Cruciferae) have against the desert locust?

A field study of the food eaten by solitary desert locusts was carried out in a winter breeding area in Mauritania. The food eaten, determined by the plant epidermis found in fecal pellets, was compared to the plant's availability in the habitat.Schouwia purpurea, well represented in the diets, was dominant at the study site. Adults had a preference forTribulus terrester. Growth and feeding on these two plants were compared. The high water content ofS. purpurea leaves limited the dry matter eaten and slowed down growth. Glucosinolates were separated and quantified by gas chromatography. There are 132mol/g dry matter in green leaves. In multiple choice tests, with paper disks, glucosinolate extracts were phagostimulant at a low concentration (21mol/g dry matter) and repulsive at a higher one (214mol/ g dry matter). Biting behavior onS. purpurea was recorded and analyzed on video. The importance ofSchouwia purpurea in desert locust habitats and its defenses is discussed.     

Antioxidant activity of grape extracts in a lecithin liposome system

Extracts of 14 different grapes were tested for their antioxidant activities in a copper-catalyzed lecithin liposome oxidation assay and analyzed for their phenolic components by high-performance liquid chromatography (HPLC). The total phenolic contents of the grape extracts varied from 176 to 1236 mg gallic acid equivalents (GAE)/L. Extracts of red wine grape varieties contained higher concentrations of phenolics than other varieties. When compared at the same 20 μM GAE basis, the grape extracts inhibited formation of conjugated diene hydroperoxides by 25.1 to 67.9%, and hexanal formation by 49.3 to 97.8%. Extracts of red table grape varieties Red Globe and Emperor and white wine grape varieties Chardonnay and Sauvignon Blanc gave the highest antioxidant activities. The relative percentage inhibition of conjugated dienes and hexanal correlated with total phenols (r=0.86 and 0.89). HPLC analyses showed that anthocyanins were the most abundant phenolic compounds in extracts of red grapes, and flavonols were most abundant in extracts of white grapes.     

Comparison of concentrations and size distributions of fungal spores in buildings with and without mould problems

Concentrations and types of airborne fungal spores and their aerodynamic sizes were studied in nine buildings with mould problems and in matched reference buildings in order to characterize the exposure in buildings with mould problems. Samples were taken with Andersen six-stage impactors in the autumn and winter. In winter, total concentrations of fungal spores in buildings with mould problems were twice those in reference buildings, even though all concentrations were quite small. In the autumn, the differences were less obvious due to the masking effect of outdoor air fungi. Also, the compositions of fungal genera differed in buildings with mould problems from that in reference buildings. The difference was most significant in the size range 2.1-4.7 μm. The size distribution of fungal spores in dwellings with mould problems skewed towards larger particles than in reference dwellings. The observed differences in size distribution indicate differences in airborne behaviour of fungal spores and, consequently, in respiratory exposure.     

Differently sized native milk fat globules separated by microfiltration: fatty acid composition of the milk fat globule membrane and triglyceride core

The aim of this study was to characterize the fatty acid composition of the core and membrane of differently sized milk fat globules separated by microfiltration, which can now be used to manufacture dairy products. Native milk fat globules of various mean diameters, ranging from d₄₃ = 2.3 µm to 8.0 µm, were obtained using microfiltration of raw whole milk. After milk fat globule washing, the milk fat globule membrane (MFGM) and the triglyceride core (TC) were separated by manual churning. After total lipid extraction from each fraction, their fatty acid composition was characterized using methyl ester analysis by gas chromatography. Regardless of season, no significant differences were observed in the fatty acid composition of the MFGM phospholipids. Conversely, significant differences were found in the fatty acid composition of TC; particularly, small fat globule TC contained more medium‐chain fatty acids and less stearic acid than large fat globule TC. These results show that the previously observed differences in total fatty acid composition among differently sized milk fat globules are due to their triglyceride composition and MFGM amount rather than to the composition of the MFGM.     

Adhesion aspects of levulinic-acid-modified furan polymers to crystalline zinc phosphate metal surfaces

The nature of the interfacial interactions between functional levulinic-acid-modified furan resin coatings and crystalline zinc phosphate hydrate films deposited on carbon steel surfaces has been systematically investigated. The typical surface topography of the highly crystallized zinc phosphate films was found to be characterized by the presence of a dendritic microstructure array of interlocking triclinic crystals. This structure acts significantly to develop mechanical interlocking bonds with the functional blend polymer which penetrates into the open surface structure of the films. Both the thickness of deposition film and the polar H₂O molecules of hydrate at the outermost film surface sites play essential roles in wetting by the functional liquid resin. When the polarized furan polymers spread on the oxide film surfaces, the carboxylate groups derived from the levulinic ester and acid molecules react to form strong hydrogen bonds with the crystallized H₂O molecules on the hopeite film. This formation of hydrogen bonding was shown to be a major factor affecting the chemical intermolecular attractions. A formulation consisting of 95 parts furan to 5 parts levulinic acid was found to yield the optimum protective coating. More than 5 parts levulinic acid resulted in the transformation of the characteristics of the polymer film from hydrophobic to hydrophilic.