Influence of the amorphous phase molecular mobility on impact and tensile properties of polyamide 6,6

In this work, the relationship between molecular mobility of polyamide 6,6 amorphous phase and mechanical properties is studied. PA66 formulations having different glass transition temperatures (T_g) obtained by additivation, chemical modification of the polyamide chains, and/or water conditioning at different hygrometry levels, are considered. The main emphasis is put on the impact strength, as measured by instrumented Charpy impact tests over a broad temperature range. It is observed that the brittle‐tough transition temperature T_B/T is closely correlated with the T_g of the samples rather than to the β secondary relaxation. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43457.     

Mechanism of PZT crystallisation under hydrothermal conditionsDevelopment of a new synthesis route

On the basis of a 1-stage hydrothermal process, we first investigated the reaction mechanism responsible for the PZT precipitation. In a first sequence, lead diffuses into the amorphous coprecipitate. By increasing the reaction temperature, these particles dissolve, leading to nucleation and growth of PZT well faceted particles. In a second step, we demonstrated that starting from very fine oxide precursors, a homogeneous PZT solid solution could be formed. Under the same conditions but without any lead precursor, a mixture of KTO (a potassium titanium oxide phase) and tetragonal zirconia is formed. A 2-stage process was developed on these assumptions. The first stage consists in producing the KTO–ZrO₂(T) mixture. In the second stage, this mixture is hydrothermally treated in presence of lead precursor. Pure and homogeneous PZT and PLZT powders were obtained throughout this new synthesis route.     

Oxidation with air of cyclohexanone to carboxylic diacids on carbon catalysts

Carbons derived from phenolic resins were used as catalysts for the aqueous phase oxidation of cyclohexanone at 140°C under air pressure. The reaction yielded mainly adipic, glutaric and succinic acids. The samples were modified by heat treatments in CO₂, air or N₂ at different temperatures and characterized to determine their surface area and porosity and to evaluate the functional groups on the surface. Treatments under CO₂ or air increased the oxidation activity. The selectivity to adipic acid was maximum (33%) after activation in air which greatly increased the surface concentration of oxygen-containing functional groups. However, it was not possible to attribute the selectivity to specific acidic, neutral or basic groups present at the surface of carbons. This revised version was published online in June 2006 with corrections to the Cover Date.     

Characterization of crosslinked,macroporous, monosized polymer particles

Macroporous, monosized poly(meta‐divinylbenzene) and poly(para‐divinylbenzene) beads have been prepared by the two‐step activated swelling method with toluene or 2‐ethylhexanoic acid as pore‐forming agents. The type of divinylbenzene isomer as well as the type of porogen has a large effect on both physical and chemical properties of the monodisperse beads. Large pores are obtained with 2‐ethylhexanoic acid as porogen while beads prepared in the presence of toluene consist of only small pores and exhibit a shrinking behavior upon drying. The beads have considerable amounts of residual vinyl groups at the end of polymerization, as determined by bromination and Fourier transform IR analysis. The morphology and texture of the particles have been investigated by scanning electron microscopy and atomic force microscopy. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 152–169, 2000     

Hierarchical porous silica membranes with dispersed Pt nanoparticles

Multifunctional silica membranes with a hierarchical porosity and containing dispersed Pt nanoparticles were prepared by an original one pot microwave-assisted sol–gel route. These membranes exhibit three porosity levels: interconnected micropores (<2 nm) in silica walls, isolated ordered mesopores (4 nm), and isolated macropores (70 nm). They were directly coated on tubular macroporous alumina supports without any intermediate mesoporous layer contrary to conventional membrane architectures. The isolated macropores and mesopores enable to increase the membrane permeability whereas the interconnected microporosity defines the membrane cut-off. The catalytic Pt nanoparticles (4 nm) mainly hosted in the mesoporous volume, are stabilised against undesirable agglomeration under working conditions. A first series of multifunctional membranes were prepared, in which preferential adsorption of hydrocarbon gases and efficient propene oxidation were evidenced. In order to avoid any possible interconnection between macropores, several strategies were investigated, which prevented sol infiltration in the macroporous support during the deposition process. These original multifunctional membranes are potentially attractive for gas separation and catalytic reactor applications.     

Associations between apolipoprotein E genotype and circulating F<Subscript>2</Subscript>-isoprostane levels in humans

Apolipoprotein E (apoE), an important determinant of plasma lipoprotein metabolism, has three common alleles (ε2, ε3, and ε4). Population studies have shown that the risk of diseases characterized by oxidative damage, such as coronary heart disease and Alzheimer’s disease, is significantly higher in ɛ4 carriers. We evaluated the association between apoE genotypes and plasma F₂-isoprostane levels, an index of lipid peroxidation, in humans. Two hundred seventy-four healthy subjects (104 males, 170 females; 46.9±13.0 yr; 200 whites, 74 blacks; 81 nonsmokers, 64 passive smokers, and 129 active smokers) recruited for a randomized clinical antioxidant intervention trial were included in this analysis. ApoE genotype was determined by PCR and restriction enzyme digestion. Free plasma F₂-isoprostane was measured by GC-MS. Genotype groups were compared using multiple regression analysis with adjustment for sex, age, race, smoking status, body mass index, plasma ascorbic acid, and β-carotene. Subjects with ε3/ε4 and ε4/ε4 genotype (ε4-carriers) and with ε2/ε3 and ε3/ε3 (non-ε4-carriers) were pooled for analysis. In subjects with high cholesterol levels (total cholesterol above 200 mg/dl), plasma F₂-isoprostane levels were 29% higher in ε4 carriers than in non-ε4-carriers (P=0.0056). High-cholesterol subjects that are ε4 carriers have significantly higher levels of lipid peroxidation as assessed by circulating F₂-isoprostane levels.     

Variations in Allelochemical Composition of Leachates of Different Organs and Maturity Stages of <Emphasis Type="Italic">Pinus halepensis</Emphasis>

We investigated changes in the occurrence of allelochemicals from leachates of different Pinus halepensis organs taking into account the stages of pine stand age (i.e., young  < 15-years-old, middle age ± 30-years, and old  > 60-years-old). GC-MS analysis of aqueous extracts revealed approx. 59 components from needles and roots. The major constituents were divided into different phytochemical groups—phenolics (50%), fatty acids (44%), and terpenoids. Further analyses were carried out to characterize the distribution of allelochemicals in different organs and P. halepensis successional stages. Roots and needles had two distinct chemical profiles, while needle leachates were composed mainly of oxygenated terpenoids (e.g., α-eudesmol, α-cadinol, and α-terpineol). Roots mainly contained fatty acids. Needles from young pine stands had the highest content of monoterpenes, suggesting their role as potential allelochemicals that could help young pine stands to establish. Pooling the different functional chemical groups showed that needles and, to a lesser extent, old roots, had higher chemical diversity than the roots of young and medium-aged pines. The highest diversity in phenolic constituents and fatty acids was in young needles (D_chem = 2.38). Finally, caffeic acid, a compound that has allelopathic properties was found in aqueous extracts at high concentrations in both young needles and old roots. The role of this compound in mediation of biological interactions in P. halepensis ecosystem functioning is discussed.     

Identification of trinucleotide repeat ligands with a FRET melting assay

DNA hairpin structures formed within a repeated tract might be a causative factor for triplet expansion observed in several debilitating diseases. We have designed and used a fluorescence resonance energy transfer (FRET) melting assay to screen for ligands that bind specifically to the CNG triplet repeats. Using this assay, we screened a panel of 33 chemicals that were previously designed to bind DNA or RNA secondary structures. Remarkably, we found that macrocyclic compounds, such as acridine dimers and trimers, exhibit interesting affinities and specificities for this motif.