包含热模型的大功率MOSFET新型电路模型

功率转换器的功率密度越来越高，发热问题越来越严重，这种功率转换器的设计对现代大功率半导体技术提出了新的挑战；因而，热问题的优化设计和核实变得比大功率器件的电模型更加重要，本文提出一种新的PSPICE模型，可以利用它计算MOSFET芯片在瞬变过程中的温度。其中的热阻可以从制造商提供的产品使用说明书得到。本文介绍的模型提供发热和电气参数之间的动态关系。它建立了与许可的热环境的关系，例如，栅极驱动电路、负载、以及散热器的分析与优化设计。利用这个模型可以改善散热器的设计。由于决定功率损耗的参数是分布在一定范围内，受生产制造的影响很大，因而散热器的设计往往由于无法预先知道功率损耗而无法进行。     

框架结构焦仓的定向倒塌爆破

介绍了框架结构焦仓定向爆破拆除的设计与施工，着重介绍了爆破参烽的选取及安全防护措施。达到预期的爆破效果。     

Wake and aerodynamics loads in multiple bodies—application to turbomachinery blade rows

Two-dimensional, unsteady flow around bodies of complex geometry (or multiple bodies) at high Reynolds number is simulated using the vortex method. This method is modified to take into account the sub-grid scale phenomena through a second order velocity structure function model adapted to the Lagrangian scheme. The dynamics of the body wake is computed using the convection-diffusion splitting algorithm; the convection process is carried out with a Lagrangian Adams-Bashforth time-marching scheme and the diffusion process is simulated using the random walk method. The pressure distribution is obtained using an integral equation derived from the pressure Poisson equation, which was first developed for a single body. Results for the numerical simulation around a linear cascade of airfoils are presented. As the flow is periodic in the y direction, the discrete vortex shedding need only be considered for a reference airfoil. The flow characteristics around the NACA 65-410 series airfoils are calculated and comparisons are made with results available in the literature.     

Synchronization of quadrature-quadrature phase-shift keying signals

The key synchronization aspects in the system design of a QQPSK (quadrature-quadrature phase-shift-keying) modem are addressed. The sensitivity of the data demodulator to synchronization errors is discussed, and contextually the performances of some IF and baseband carrier phase and symbol timing recovery schemes are evaluated both theoretically and by computer simulations. In particular, a fourth-power IF carrier/clock regenerator and two baseband clock recovery schemes, with and without the aid of data decisions, respectively, are taken into account. The analysis shows on the one hand the substantial robustness of QQPSK to carrier phase errors and the adequacy of the examined carrier extraction scheme. On the other hand, the remarkable sensitivity of QQPSK to symbol timing inaccuracy is stressed and the need to resort to the newly proposed decision-aided baseband clock recovery scheme is pointed out     

纳米β-Ni(OH)2与球型Ni(OH)2的热性能比较研究

用配位沉淀法合成出纳米级Ni（OH）2，并对其进行XRD，TEM，DSC分析，分析结果表明，所得纳米β-Ni（OH）2为可用作电极材料的β-Ni（OH）2，粒径为30－40nm，且热分解温度比普通球镍低10℃左右，摩尔分解热比普通球镍低4－7kJ，从理论上分析了产生此现象的原因。     

Carbon mineralization from composts and food industry wastes added to soil

We have studied the short term C mineralization of six wastes from important food industries, one sludge from a biogas plant and three composts. All the wastes were characterized chemically and fractionated according to the Van Soest method. The fresh wastes were incubated under controlled environment conditions to determine the C mineralization rate. Based on first order mineralization kinetics, we calculated the hypothetical amount of stable C in the wastes as the amount of C that would not be mineralized within one year under field conditions. The percentage of stable organic C in the organic matter was in general much larger in the composts than in the other wastes, but when expressed on dry matter, the non-composted wastes had comparable or larger amounts of stable organic C than the composts and have a considerable potential for supplying organic matter to soils, and hence for C sequestration. The amount of stable organic C could best be predicted by the total N content of the wastes (R _a ² = 0.855), whereas the results of the fractionation had very little predictive power, probably due to problems related to the high ash content of some of the wastes. An index that combined stable organic C and N and P content in the wastes was calculated to assess possible limitations for applying these wastes in agriculture. Under current nutrient legislation in Western Europe, a number of these wastes will only be usable in small amounts, but these and other food industry wastes could still prove to be valuable soil amendments in nutrient poor situations, for increasing soil organic C content and supplying nutrients.     

Spontaneous erythroid colony formation as the clue to an underlying myeloproliferative disorder in patients with Budd-Chiari syndrome or portal vein thrombosis

Results from this laboratory have shown that bone metabolism is directly related to extracellular pH and that high concentrations of tobramycin released from impregnated polymethylmethacryrate (PMMA) beads has pH-dependent toxic effects on bone. In the present study, beneficial effects of calcium hydroxide-impregnated PMMA were investigated regarding tobramycin toxicity and bone metabolism in chick embryo tibiae in vitro. Also using Ca(OH)2 as a pH regulator, the antibiotic efficacy of tobramycin-impregnated PMMA was evaluated with respect to inhibition of Staphylococcus aureus growth. When Ca(OH)2 was added to PMMA beads containing tobramycin, the beads released hydroxyl and calcium ions into the culture medium and released more antibiotic than beads containing only tobramycin. Bone metabolism (glycolysis, total protein synthesis, and collagen synthesis) was enhanced by Ca(OH)2-impregnated beads with or without tobramycin. Additionally, bacterial growth was inhibited more strongly when S. aureus was incubated with tobramycin- and Ca(OH)2-impregnated PMMA disks than with disks containing only tobramycin. This study demonstrates the feasibility of adding Ca(OH)2 to tobramycin-impregnated PMMA beads as a regulator of local pH and a promoter of bone metabolism for protection of bone when high concentrations of tobramycin are used to treat osteomyelitis. It also suggests that lower concentrations of antibiotic may be effective if Ca(OH)2 and tobramycin are administered simultaneously.     

建立数据库用微机进行钻井液设计

为了更好地指导现场钻井液施工,利用微机建立有关数据库和相应的设计软件,根据地质、工程的要求和井下情况进行钻井液设计,其特点是资料全面、程序运行可靠且操作简便,设计符合现场情况,施工顺利。在千12区块,用微机设计的109口井与人工设计的75口井相比,钻井速度提高,井下复杂情况减少,提高了经济效益。