Liquid recirculation in microfluidic channels by the interplay of capillary and centrifugal forces

We demonstrate a technique to recirculate liquids in a microfluidic channel by alternating predominance of centrifugal and capillary forces to rapidly bring the entire volume of a liquid sample to within one diffusion length, δ, of the surface, even for sample volumes hundreds of times the product of δ and the geometric device area. This is accomplished by repetitive, random sampling of an on-disc sample reservoir to form a thin fluid layer of thickness δ in a microchannel, maintaining contact for the diffusion time, then rapidly exchanging the fluid layer for a fresh aliquot by disc rotation and stoppage. With this technique, liquid volumes of microlitres to millilitres can be handled in many sizes of microfluidic channels, provided the channel wall with greatest surface area is hydrophilic. We present a theoretical model describing the balance of centrifugal and capillary forces in the device and validate the model experimentally.     

A proposal for student modeling based on ontologies and diagnosis rules

The advances in the educational field and the high complexity of student modeling have provoked it to be one of the aspects more investigated in Intelligent Tutoring Systems (ITSs). The Student Models (SMs) should not only represent the student’s knowledge, but rather they should reflect, as faithfully as possible, the student’s reasoning process. To facilitate this goal, in this article a new approach to student modeling is proposed that benefits from the advantages of Ontological Engineering, advancing in the pursue of a more granular and complete knowledge representation. It’s focused, mainly, on the SM cognitive diagnosis process, and we present a method providing a rich diagnosis about the student’s knowledge state – especially, about the state of learning objectives reached or not. The main goal is to achieve SMs with a good adaptability to the student’s features and a high flexibility for its integration in varied ITSs.     

IEEE 802.21: Media independence beyond handover

The IEEE 802.21 standard facilitates media independent handovers by providing higher layer mobility management functions with common service primitives for all technologies. Right after the base specification was published, several voices rose up in the working group advocating to broaden the scope of IEEE 802.21 beyond handovers. This paper aims at updating the reader with the main challenges and functionalities required to create a Media Independence Service Layer, through the analysis of scenarios which are being discussed within the working group: 1) Wireless Coexistence, and 2) Heterogeneous Wireless Multihop Backhaul Networks.     

Real-time massive convolution for audio applications on GPU

Massive convolution is the basic operation in multichannel acoustic signal processing. This field has experienced a major development in recent years. One reason for this has been the increase in the number of sound sources used in playback applications available to users. Another reason is the growing need to incorporate new effects and to improve the hearing experience. Massive convolution requires high computing capacity. GPUs offer the possibility of parallelizing these operations. This allows us to obtain the processing result in much shorter time and to free up CPU resources. One important aspect lies in the possibility of overlapping the transfer of data from CPU to GPU and vice versa with the computation, in order to carry out real-time applications. Thus, a synthesis of 3D sound scenes could be achieved with only a peer-to-peer music streaming environment using a simple GPU in your computer, while the CPU in the computer is being used for other tasks. Nowadays, these effects are obtained in theaters or funfairs at a very high cost, requiring a large quantity of resources. Thus, our work focuses on two mains points: to describe an efficient massive convolution implementation and to incorporate this task to real-time multichannel-sound applications.     

MELM-GRBF: A modified version of the extreme learning machine for generalized radial basis function neural networks

In this paper, we propose a methodology for training a new model of artificial neural network called the generalized radial basis function (GRBF) neural network. This model is based on generalized Gaussian distribution, which parametrizes the Gaussian distribution by adding a new parameter τ. The generalized radial basis function allows different radial basis functions to be represented by updating the new parameter τ. For example, when GRBF takes a value of τ=2, it represents the standard Gaussian radial basis function. The model parameters are optimized through a modified version of the extreme learning machine (ELM) algorithm. In the methodology proposed (MELM-GRBF), the centers of each GRBF were taken randomly from the patterns of the training set and the radius and τ values were determined analytically, taking into account that the model must fulfil two constraints: locality and coverage. An thorough experimental study is presented to test its overall performance. Fifteen datasets were considered, including binary and multi-class problems, all of them taken from the UCI repository. The MELM-GRBF was compared to ELM with sigmoidal, hard-limit, triangular basis and radial basis functions in the hidden layer and to the ELM-RBF methodology proposed by Huang et al. (2004) [1]. The MELM-GRBF obtained better results in accuracy than the corresponding sigmoidal, hard-limit, triangular basis and radial basis functions for almost all datasets, producing the highest mean accuracy rank when compared with these other basis functions for all datasets.     

A historical perspective of algorithmic lateral inhibition and accumulative computation in computer vision

Certainly, one of the prominent ideas of Professor José Mira was that it is absolutely mandatory to specify the mechanisms and/or processes underlying each task and inference mentioned in an architecture in order to make operational that architecture. The conjecture of the last fifteen years of joint research has been that any bottom-up organization may be made operational using two biologically inspired methods called “algorithmic lateral inhibition”, a generalization of lateral inhibition anatomical circuits, and “accumulative computation”, a working memory related to the temporal evolution of the membrane potential. This paper is dedicated to the computational formulation of both methods. Finally, all of the works of our group related to this methodological approximation are mentioned and summarized, showing that all of them support the validity of this approximation.     

Stream engines meet wireless sensor networks: cost-based planning and processing of complex queries in AnduIN

Wireless sensor networks are powerful, distributed, self-organizing systems used for event and environmental monitoring. In-network query processors like TinyDB offer a user friendly SQL-like application development. Due to the sensor nodes?? resource limitations, monolithic approaches often support only a restricted number of operators. For this reason, complex processing is typically outsourced to the base station. Nevertheless, previous work has shown that complete or partial in-network processing can be more efficient than the base station approach. In this paper, we introduce AnduIN, a system for developing, deploying, and running complex in-network processing tasks. In particular, we present the query planning and execution strategies used in AnduIN, a system combining sensor-local in-network processing and a data stream engine. Query planning employs a multi-dimensional cost model taking energy consumption into account and decides autonomously which query parts will be processed within the sensor network and which parts will be processed at the central instance.     

Designing adaptive learning itineraries using features modelling and swarm intelligence

In this paper, Bayesian network (BN) and ant colony optimization (ACO) techniques are combined in order to find the best path through a graph representing all available itineraries to acquire a professional competence. The combination of these methods allows us to design a dynamic learning path, useful in a rapidly changing world. One of the most important advances in this work, apart from the variable amount of pheromones, is the automatic processing of the learning graph. This processing is carried out by the learning management system and helps towards understanding the learning process as a competence-oriented itinerary instead of a stand-alone course. The amount of pheromones is calculated by taking into account the results acquired in the last completed course in relation to the minimum score required and by feeding this into the learning tree in order to obtain a relative impact on the path taken by the student. A BN is used to predict the probability of success, by taking historical data and student profiles into account. Usually, these profiles are defined beforehand; however, in our approach, some characteristics of these profiles, such as the level of knowledge, are classified automatically through supervised and/or unsupervised learning. By using ACO and BN, a fitness function, responsible for automatically selecting the next course in the learning graph, is defined. This is done by generating a path which maximizes the probability of each user??s success on the course. Therefore, the path can change in order to adapt itself to learners?? preferences and needs, by taking into account the pedagogical weight of each learning unit and the social behaviour of the system.     

Shape-sensitive MLS deformation

This work presents methods for deforming meshes in a shape-sensitive way using Moving Least Squares (MLS) optimization. It extends an approach for deforming space (Cuno et al. in Proceedings of the 27th Computer Graphics International Conference, pp. 115–122, 2007) by showing how custom distance metrics may be used to achieve deformations which preserve the overall mesh shape. Several variant formulations are discussed and demonstrated, including the use of geodesic distances, distances constrained to paths contained in the mesh, the use of skeletons, and a reformulation of the MLS scheme which makes it possible to affect the bending behavior of the deformation. Finally, aspects of the implementation of these techniques in parallel architectures such as GPUs (graphics processing units) are described and compared with CPU-only implementations.