Using Analog Predistortion for Linearizing Class A–C Power Amplifiers

An analog 5th order, complex-valued polynomial predistortion IC has been built to linearize the behavior of RF power amplifiers. The predistorter can be used either at baseband or low IF frequencies and it was tested using a simple IF amplifier that could be biased to operate in classes A, AB, B and C. Intermodulation products can be reduced by 20 to 30 dB in classes A and AB over a bandwidth of several MHz. In classes B and C the shape of nonlinearity is such that a low-order polynomial predistortion function is not sufficient for linearizing them.     

Merocyanine/C60 Planar Heterojunction Solar Cells: Effect of Dye Orientation on Exciton Dissociation and Solar Cell Performance

In this study the charge dissociation at the donor/acceptor heterointerface of thermally evaporated planar heterojunction merocyanine/C₆₀ organic solar cells is investigated. Deposition of the donor material on a heated substrate as well as post‐annealing of the complete devices at temperatures above the glass transition temperature of the donor material results in a twofold increase of the fill factor. An analytical model employing an electric‐field‐dependent exciton dissociation mechanism reveals that geminate recombination is limiting the performance of as‐deposited cells. Fourier‐transform infrared ellipsometry shows that, at temperatures above the glass transition temperature of the donor material, the orientation of the dye molecules in the donor films undergoes changes upon annealing. Based on this finding, the influence of the dye molecules’ orientations on the charge‐transfer state energies is calculated by quantum mechanical/molecular mechanics methods. The results of these detailed studies provide new insight into the exciton dissociation process in organic photovoltaic devices, and thus valuable guidelines for designing new donor materials.     

Enhanced performance in the deteriorated area of multicrystalline silicon wafers by internal gettering

The deteriorated area of the multicrystalline silicon (mc‐Si) ingots grown by directional solidification, commonly known as the Red Zone, is usually removed before wafering. This area, characterized by poor minority carrier lifetime, is located on the sides, at the top, and the bottom of the mc‐Si ingots. In this study, the effect of internal gettering by oxygen precipitates and structural defects has been investigated on the bottom zone of a mc‐Si ingot. Nucleation and growth of oxygen precipitates as well as low temperature annealing were studied. Photoluminescence imaging, lifetime mapping, and interstitial iron measurements performed by μ‐PCD reveal a considerable reduction of the bottom Red Zone. An improvement of lifetime from below 1 µs to about 20 µs and a reduction of interstitial iron concentration from 1.32 × 10¹³ at/cm³ to 8.4 × 10¹⁰ at/cm³ are demonstrated in this paper. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization of Submillimeter Wave Absorbers from 200–600 GHz

This paper presents measurements of both specular and non-specular scattering from several submillimeter wave absorber materials designed for antenna testing and from low-cost carpet materials. The frequency range is 200–600 GHz in specular scattering, and 300–400 GHz in non-specular scattering measurements. The constructed bistatic test bench allows testing of the full continuous angular range of 0°–90°. The measurement results show large differences in performance of different materials. It is shown that reflectivities below ?50 dB over limited angular ranges are possible with a correct alignment of the material. Also, low-cost carpet materials have lower than ?15 dB reflectivities in most angles, and may be useful in non-critical parts of the antenna test range. The results can be used to optimise the absorber placement inside an antenna range, concerning both best performance and lowest cost.     

Distribution of Nitrogen in the Cationized Potato Starch Granule

The distribution of a cationic reagent in the potato starch granule derivatized by reaction with 1,2-epoxypropyl trimethylammonium chloride was studied by ESCA spectroscopy. It was possible to detect and quantify the contents of nitrogen derived from proteinous material and nitrogen derived from the cationizing reagent on the surfaces of starch preparations. The results show that the differences in nitrogen distribution between cationic starches prepared by different (dry or wet) methods are negligible. According to the result it seems that the cationization takes place more easily in the amorphous material of the inner parts of the granule than in the crystalline amylopectin layer of the surface.     

Expression and Roles of Individual HIF Prolyl 4-Hydroxylase Isoenzymes in the Regulation of the Hypoxia Response Pathway along the Murine Gastrointestinal Epithelium

The HIF prolyl 4-hydroxylases (HIF-P4H) control hypoxia-inducible factor (HIF), a powerful mechanism regulating cellular adaptation to decreased oxygenation. The gastrointestinal epithelium subsists in “physiological hypoxia” and should therefore have an especially well-designed control over this adaptation. Thus, we assessed the absolute mRNA expression levels of the HIF pathway components, Hif1a, HIF2a, Hif-p4h-1, 2 and 3 and factor inhibiting HIF (Fih1) in murine jejunum, caecum and colon epithelium using droplet digital PCR. We found a higher expression of all these genes towards the distal end of the gastrointestinal tract. We detected mRNA for Hif-p4h-1, 2 and 3 in all parts of the gastrointestinal tract. Hif-p4h-2 had significantly higher expression levels compared to Hif-p4h-1 and 3 in colon and caecum epithelium. To test the roles each HIF-P4H isoform plays in the gut epithelium, we measured the gene expression of classical HIF target genes in Hif-p4h-1^−/−, Hif-p4h-2 hypomorph and Hif-p4h-3^−/− mice. Only Hif-p4h-2 hypomorphism led to an upregulation of HIF target genes, confirming a predominant role of HIF-P4H-2. However, the abundance of Hif-p4h-1 and 3 expression in the gastrointestinal epithelium implies that these isoforms may have specific functions as well. Thus, the development of selective inhibitors might be useful for diverging therapeutic needs.     

Extended studies of degradation mechanisms in the refractory lining of a rotary kiln for iron ore pellet production

Changes, over a period of 8 years, in the chemical composition and morphology of deposit and lining materials in a production rotary kiln for iron ore pellet manufacture are described. The following have been studied: two types of refractory brick used as lining material; deposited chunk materials from the lining; the interaction zones between deposits and linings. Morphological changes at the deposit/lining interface, and the active chemical reactions, are established. Larger hematite grains in the deposit material (5–50 μm) primarily remain at the original deposit/lining interface. The remainder penetrates fissures, voids and brick joints, forms a laminar structure with corundum from the bricks, and migrates in grains in the lining material. Potassium penetrates more deeply into the bricks than hematite, resulting in the formation of kalsilite, leucite and potassium β-alumina, which contribute to degradation of the lining.     

New,Non‐quinone Fluorogeldanamycin Derivatives Strongly Inhibit Hsp90

Streptomyces hygroscopicus is a natural producer of geldanamycin. Mutasynthetic supplementation of an AHBA‐blocked mutant with all possible monofluoro 3‐aminobenzoic acids provided new fluorogeldanamycins. These showed strong antiproliferative activity and inhibitory effects on human heat shock protein Hsp90. Binding to Hsp90 in the low nanomolar range was determined from molecular modelling, AFM analysis and by calorimetric studies.