Intrapersonal and interpersonal risk factors for peer victimization in immigrant youth in Finland.

This study (a) compared native Finns and immigrant children with respect to different forms of peer victimization and (b) tested whether intrapersonal (e.g., depression) and interpersonal (e.g., peer rejection) risk factors help to explain the association between immigrant status and peer victimization. The sample was drawn from the first phase of a large intervention evaluation project, KiVa, in Finland, composed of 4,957 native Finns (51% girls), 146 first-generation immigrants (48% girls), and 310 second-generation immigrants (53% girls) 9 to 12 years of age. The concurrent data included self- and peer reports collected via Internet-based questionnaires. Compared with native youth, first- and second-generation immigrants were more often targets of both peer- and self-reported victimization. Both immigrant groups experienced higher levels of physical, racist, and sexual victimization than natives. Furthermore, second-generation immigrants reported higher levels of property damage, threats, and cybervictimization than native Finns. Significant indirect effects were found between immigrant status and victimization. Interpersonal but not intrapersonal risk factors helped to explain these associations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Determination of specific heat of phenol formaldehyde resol resins by differential scanning calorimetry

The specific heat, Cp, was determined by DSC on a series of resol-type phenol formaldehyde resins with varying phenol formaldehyde molar ratio. The extrapolated Cp values at 25°C vary between 1.181-1.206 kJ · kg^?1 K^?1 and the dCp/dT ratio was found to be 0.0042kJ · kg^?1K^?2 in the temperature range of 70–125°C.     

New,Non‐quinone Fluorogeldanamycin Derivatives Strongly Inhibit Hsp90

Streptomyces hygroscopicus is a natural producer of geldanamycin. Mutasynthetic supplementation of an AHBA‐blocked mutant with all possible monofluoro 3‐aminobenzoic acids provided new fluorogeldanamycins. These showed strong antiproliferative activity and inhibitory effects on human heat shock protein Hsp90. Binding to Hsp90 in the low nanomolar range was determined from molecular modelling, AFM analysis and by calorimetric studies.     

Multiphase coatings from complex radiation curable polyurethane dispersions

The waterborne nature of radiation curable polyurethane dispersions largely respond to the current environmental concerns and do not require any additional coalescent since the film formation (drying) and hardening (photo-curing) take place in distinct steps. It is possible to design aqueous dispersions with distinct polymer particle populations resulting in micro-structured coatings with optimized properties over a wide range of curing conditions. Mixed dispersions based on hard and soft acrylated polyurethane particles were used as model systems for the present study. The minimum film formation temperature has been investigated as a function of the hard:soft polymer ratio. The elastic modulus of the dry coatings shows a reinforcing effect consistent with the inclusion of hard domains in a soft continuous matrix. However, the level of reinforcement is not properly predicted by the usual mechanical models and it is qualitatively accounted for by assuming a composition gradient (interphase) between the hard domains and the matrix. The multiple-phase structure was clearly established by Atomic Force Microscopy in agreement with thermal analysis data. Furthermore the local nanoscale mechanical properties were mapped using a new imaging mode based on real-time force–distance curve analysis. Finally, the coatings prepared using this multiple-phase pattern present a clear benefit over conventional homogeneous coatings by offering an improved balance of chemical and mechanical resistance in pigmented systems applied on melamine-coated MDF panels.     

Extended studies of degradation mechanisms in the refractory lining of a rotary kiln for iron ore pellet production

Changes, over a period of 8 years, in the chemical composition and morphology of deposit and lining materials in a production rotary kiln for iron ore pellet manufacture are described. The following have been studied: two types of refractory brick used as lining material; deposited chunk materials from the lining; the interaction zones between deposits and linings. Morphological changes at the deposit/lining interface, and the active chemical reactions, are established. Larger hematite grains in the deposit material (5–50 μm) primarily remain at the original deposit/lining interface. The remainder penetrates fissures, voids and brick joints, forms a laminar structure with corundum from the bricks, and migrates in grains in the lining material. Potassium penetrates more deeply into the bricks than hematite, resulting in the formation of kalsilite, leucite and potassium β-alumina, which contribute to degradation of the lining.     

Study of the PM Gas-Phase Filter Artifact Using a Setup for Mixing Diesel-Like Soot and Hydrocarbons

The filter artifact is a significant source of error in gravimetric measurements of particulate matter (PM) exhaust. However, only a few studies on the subject exist. Results from these studies show a large discrepancy mainly because the experiments were performed using real diesel vehicle exhaust with varying exhaust composition. In this study, a setup for mixing diesel-like soot and hydrocarbon vapor was constructed for generating a stable exhaust aerosol with adjustable composition. The particle size distribution of the diesel-fueled soot generator (GMD [geometric mean diameter] adjustable between 27 and 164 nm) was found to represent “real” exhaust particulate emission. This setup was applied for studying the filter artifact on Teflon-coated glass fiber filters using pentadecane as the hydrocarbon vapor. Experiments were performed using particle and hydrocarbon concentrations of 130–700 μg/m³ and 10–12 ppm, respectively. It was found that the particle concentration of the aerosol affects the filter artifact. At lower particle concentrations, more hydrocarbon adsorption was detected. In the absence of particles, the adsorption was highest. Furthermore, filter soot load, corresponding to 0.13%–0.66% of the clean filter mass, was found to affect adsorption. Sooty filters adsorbed less vapor than clean filters. However, increasing the soot load resulted in more adsorption. Moreover, it was found that the backup filter serves as a reasonable estimate of the filter artifact only for low particle concentrations and filter soot loads. These results indicate that the filter soot load is an important parameter influencing the filter artifact, and therefore, it should be considered when performing gravimetric sampling. The setup was proven to be a unique tool for quantitative studies of the filter artifact.

Copyright 2012 American Association for Aerosol Research     

Size Dependence of the Ratio of Aerosol Coagulation to Deposition Rates for Indoor Aerosols

A thorough understanding of the importance of aerosol coagulation and deposition relative to each other as modifiers of the particle size distribution plays an important role in the proper selection of conditions to estimate the deposition rate coefficient. In this work, a theoretical analysis was conducted for investigating the size-resolved ratio of coagulation to deposition for different types of size distributions using the Simpson integral method. The theoretical model was subsequently qualitatively validated by experiments in a completely mixed and ventilated aerosol chamber. Both experimental and theoretical studies show that the ratio of the rates of coagulation to deposition is strongly dependent on the total particle number concentration and the geometric mean diameter of the aerosol. A variation of the ratio of coagulation to deposition by several orders of magnitude for aerosols with differing size distributions was found. Thus the previously employed criterion for the negligence of coagulation based solely on the total particle number concentration was shown to be insufficient to accurately judge whether an aerosol is suited for the estimation of the deposition rate coefficient. Aerosols with wide size distributions are not recommended for use in the estimation of the deposition rate coefficient. The study provides a method to understand the role of coagulation and deposition for indoor aerosols.

Copyright 2013 American Association for Aerosol Research     

On-Line Characterization of Morphology and Water Adsorption on Fumed Silica Nanoparticles

The first wetting layer on solid nanoparticles has direct implications on the roles these particles play in industrial processes and technological applications as well as in the atmosphere. We present a technique for online measurements of the adsorption of the first few water layers onto insoluble aerosol nanoparticles. Atomized fumed silica nanoparticles were dispersed from aqueous suspension and their hygroscopic growth factors (HGF) and number of the adsorbed water layers at subsaturated conditions were measured using a nanometer hygroscopic tandem differential mobility analyzer (HTDMA). Particle morphology was characterized by electron microscopy and particle density was determined by mobility analysis. The HGFs of the size-selected particles at mobility diameters from 10 to 50 nm at 90% relative humidity (RH) varied from 1.05 to 1.24, corresponding to 2–6 layers of adsorbed water. The morphology of the generated fumed silica nanoparticles varied from spheres at 8–10 nm to agglomerates at larger diameters with effective density from 1.7 to 0.8 g/cm³ and fractal dimension of 2.6. The smallest spheres and agglomerates had the highest HGFs. The smallest particles with diameters of 8 and 10 nm adsorbed two to three water layers in subsaturated conditions, which agreed well with the Frenkel, Halsey, and Hill (FHH) isotherm fitting. In comparison to the small spheres or large agglomerates, the compact agglomerate structure containing a few primary particles increased the number of adsorbed water layers by a factor of ～1.5. This was probably caused by the capillary effect on the small cavities between the primary particles in the agglomerate.