Liquid Phase Sintering of Alumina, II. Penetration of Liquid Phase into Model Microstructures

Alumina preforms containing artificial pores were sintered at 1630°C in air and vacuum. Glass penetration into the alumina preforms was conducted at 1600°C in air. It was found that the trapped gases in alumina preforms sintered in air caused the random and incomplete filling of the smaller and larger artificial pores. In contrast, the pores in the alumina preform sintered in vacuum were completely filled during glass penetration.     

Tunable fluorescence in chromophore-functionalized nanodiamond induced by energy transfer

Hybrid materials comprising diamond nanoparticles (ND) and oligo(phenylenevinylenes) (OPVs) have been synthesized by the covalent linking of acid-functionalized ND and OPV-amine. Chromophore-functionalized ND particles with long alkyl and π-conjugated groups are readily dispersed in various organic solvents without any precipitation after several hours. A careful study of the properties of the hybrid materials revealed an aggregation-induced energy transfer from the blue fluorescent nanodiamonds to green emitting OPVs. At very low concentrations the hybrid emits in the blue region, but as the concentration is increased a gradual transition from blue to green emission occurs. Competitive processes such as aggregation-induced enhanced emission and self-absorption have been ruled out and a molecular picture of the phenomenon is proposed. This strategy can open a plethora of new avenues for fluorescent nanodiamonds in optoelectronics and light harvesting apart from bio-imaging.     

Carbon nanowalls deposited by inductively coupled plasma enhanced chemical vapor deposition using aluminum acetylacetonate as precursor

Well aligned carbon nanowalls, a few nanometers thick, were fabricated by continuous flow of aluminum acetylacetonate (Al(acac)₃) without a catalyst, and independent of substrate material. The nanowalls were grown on Si, and steel substrates using inductively coupled plasma-enhanced chemical vapor deposition. Deposition parameters like flow of argon gas and substrate temperature were correlated with the growth of carbon nanowalls. For a high flow of argon carrier gas, an increased amount of aluminum in the film and a reduced lateral size of the carbon walls were found. The aluminum is present inside the carbon nanowall matrix in the form of well crystallized nanosized Al₄C₃ precipitates.     

Visible spectroelectrochemical characterization of Geobacter sulfurreducens biofilms on optically transparent indium tin oxide electrode

We report visible spectroelectrochemical (SEC) characterization of cytochrome c₅₅₂ (cyt c₅₅₂) in viable Geobacter sulfurreducens biofilms on tin-doped indium oxide (ITO) electrodes poised at 0.24 V vs. SHE. G. sulfurreducens biofilms were grown in minimal medium with acetate as electron donor (turnover conditions), followed by 24 h incubation in electron donor-depleted medium (non-turnover conditions). The electronic absorption spectra of G. sulfurreducens biofilms showed the lowest energy absorption band in the reduced state at 552 nm, which indicated excess of cyt c₅₅₂ in the biofilm. The spectra under non-turnover conditions displayed gradual reduction of the cyt c₅₅₂, following the step-wise decrease of electrode potential from 0.0 V to −0.6 V vs. standard calomel electrode (SCE). The spectral changes were fully reversible in both positive and negative direction of the scan potential, with average midpoint potential value of −0.42 V vs. SCE. Confocal microscopy analysis revealed that the thickness of biofilms under turnover conditions and non-turnover conditions was approximately 35 and 3.5 μm, respectively. This is the first study to observe the reversible redox conversion of cyt c₅₅₂ in viable G. sulfurreducens biofilms.     

Timolol‐imprinted soft contact lenses: Influence of the template: Functional monomer ratio and the hydrogel thickness

Isothermal titration calorimetry (ITC) was used to identify the optimal timolol:functional monomer ratio for preparing soft contact lenses (SCLs) able to sustain drug release. ITC profiles revealed that each timolol molecule required six to eight acrylic acid (AAc) monomers to saturate the binding and that these ratios could be the most suitable for creating imprinted cavities. Various poly(hydroxyethyl methacrylate‐co‐AAc) hydrogels 0.2 and 0.9 mm thick were prepared with timolol:AAc molar ratios ranging from 1 : 6 to 1 : 32 and also in the absence of timolol. The hydrogels were reloaded with timolol by immersion in 0.04, 0.06, 0.08, and 0.10 mM drug solutions. Both imprinted and nonimprinted hydrogels showed a high affinity for the drug because of the presence of AAc. Nevertheless, the 1 : 6 and 1 : 8 imprinted hydrogels loaded less timolol but sustained the release better than the other hydrogels. These differences were explained in terms of the different arrangement of the functional monomers along the network. The imprinting effect was more noticeable in the case of the thinnest hydrogels, where the contribution of the diffusion path to the release rate was smaller. The results obtained prove the interest of ITC for the rational design of drug‐imprinted networks to be used as medicated SCLs. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Batch and continuous studies on treatment of pulp mill wastewater by Aeromonas formicans

Batch and continuous studies have been conducted on the treatment of black liquor from a kraft pulp and paper mill by a bacterial strain, Aeromonas formicans. The results of batch studies revealed that the strain was able to remove 71% and 78% of COD and lignin respectively, while the colour removal efficiency was around 86% in 10 days of retention time. The analysis of lignin degradation products by gas chromatography after 20 days of incubation revealed the formation of some phenolic acids, which were responsible for the decrease in pH during batch studies. The removal efficiencies of COD, colour and lignin obtained in continuous reactor studies were 73, 88 and 77% respectively for an 8 day detention period and these efficiencies were almost the same as obtained in batch studies. © 2001 Society of Chemical Industry     

Fabrication of poly (vinyl alcohol)/ovalbumin/cellulose nanocrystals/nanohydroxyapatite based biocomposite scaffolds

Biocomposite scaffolds composed of PVA, ovalbumin, cellulose nanocrystals, and nanohydroxyapatite were fabricated by freeze-drying method. The results revealed that the different fractions of nanohydroxyapatite and cellulose nanocrystals provide the mechanical strength and stiffness to the desired biocomposite scaffolds. In vitro biomineralization showed the formation of apatite onto the surface of obtained biocomposite scaffolds and increased as amount of nanohydroxyapatite increased. The obtained results suggest that the different combinations of these four biomaterials can be used to fabricate highly porous scaffolds with desired mechanical performance and degradation rate by adjusting ratio for potential use in low load-bearing applications.     

Nanohydroxyapatite-coated hydroxyethyl cellulose/poly (vinyl) alcohol electrospun scaffolds and their cellular response

The present study focused on the preparation of nanohydroxyapatite (nHA)-coated hydroxyethyl cellulose/polyvinyl alcohol (HEC/PVA) nanofibrous scaffolds for bone tissue engineering application. The electrospun HEC/PVA scaffolds were mineralized via alternate soaking process. FESEM revealed that the nHA was formed uniformly over the nanofibers. The nHA mineralization enhanced the tensile strength and reduced the elongation at breakage of scaffolds. The wettability of the nanofibrous scaffolds was significantly improved. The in vitro biocompatibility of scaffolds was evaluated with human osteosarcoma cells. nHA-coated scaffolds had a favorable effect on the proliferation and differentiation of osteosarcoma cell and could be a potential candidate for bone regeneration.