Capillary infiltration studies of liquids into 3D-stitched C–C preforms: Part A: Internal pore characterization by solvent infiltration,mercury porosimetry,and permeability studies

Mathematical modeling of silicon infiltration in porous carbon–carbon (C–C) preforms is the key to fabricate liquid silicon infiltration based carbon–silicon carbide (C–SiC) composite components. Existing models for silicon infiltration are based on straight capillaries. For interconnected capillary systems, e.g. as in 3D-stitched C–C preforms these show large deviations when compared with experimental observations. The aim of the present study is to develop a mathematical model suitable for silicon infiltration in 3D-stitched C–C preforms. The work is being presented in two parts: A and B. This part (Part A) describes the experimental details pertaining to the fabrication of the C–C preforms and their pore structure characterization by mercury porosimetry, infiltration of solvents by capillary rise, and by permeability studies. A two-pore capillary infiltration model termed as modified Washburn equation has been proposed. It has been validated by experimental data of solvent infiltration. The same model correlates silicon infiltration observations as well (Part B).     

Design and Development of High-Velocity Slurry Erosion Test Rig Using CFD

Slurry erosion (SE) is commonly observed in almost all kinds of components and machineries involved in fluid (liquid) transfer and delivery. During design and development phase of these components, test rigs are usually required to evaluate their performance; however, only few detailed designs of test rigs are available for SE investigations. Among the existing designs of SE test rigs, most of them belong to rotary type. In the present study, design of a new type of SE test rig has been proposed, which is simpler in construction and working. This newly designed test rig could possibly eliminate some of the limitations (velocity-concentration interdependence and lack of acceleration distance) found in the existing set-ups. Calibration of the test rig was done for jet velocity and erodent concentration. Commissioning of the rig was undertaken by evaluating the effect of operating parameters (concentration and impingement angle) on the erosion rates of aluminum and cast iron. Results show that the rig was able to capture the traditional responses of ductile and brittle erosion behaviors being observed for these materials. Repeatability of the test rig was ensured, and the results were found to be within the acceptable error limits.     

Efficient Allylic Oxidation of Olefins Catalyzed by Polymer Supported Metal Schiff Base Complexes with Peroxides

Three homogeneous Cu(II), Co(II) and Ni(II) complexes of a Schiff base ligand and their heterogeneous complexes supported on poly(4-aminostyrene) were prepared and characterized by using elemental analysis, fourier transform infrared spectroscopy, UV–Vis diffuse reflectance spectroscopy, thermogravimetric analysis and scanning electron microscopy. The catalytic performance of both homogeneous and heterogeneous complexes was evaluated in the liquid phase oxidation of cyclohexene, styrene and trans-stilbene in acetonitrile with tert-butylhydroperoxide or hydrogen peroxide as the oxidant. All types of catalyst were active in oxidation; and, the complexes produce allylic oxidation products in all cases. Immobilized complexes are slightly more active than their homogeneous complexes. The polymer-supported Cu(II) complex shows a higher catalytic activity than the other metal species. The activities of the immobilized catalysts remained nearly the same after five cycles, suggesting the true heterogeneous nature of the catalyst.     

Enhanced efficiency of phenothiazine derivative organic dye‐sensitized ionic liquid solar cells on aging

We have used electrochemical impedance to investigate the improvement in photovoltaic performance in aging of ionic liquid dye‐sensitized solar cells using a high‐absorption coefficient organic dye (2E)‐2‐cyano‐3‐(5‐(5‐((E)‐2‐(10‐(2‐ethylhexyl)‐10H‐phenothiazin‐7‐yl)vinyl)thiophen‐2‐yl)thiophen‐2‐yl)acrylic acid, which is in contrast to N719‐based devices. It was found that the enhancement is due to reduced recombination of the photoexcited electrons. The decreased recombination plausibly originates from molecular re‐orientation along with cation adsorption, with Fourier transform infrared spectra lending support to the former mechanism. After aging, the photovoltaic device using the organic dye outperforms the counterpart by the ruthenium complex dye and achieves an impressive efficiency of 5.6% under AM 1.5 100 mW/cm² illumination. Copyright © 2011 John Wiley & Sons, Ltd.     

Dissimilar Impact Welding of 6111-T4, 5052-H32 Aluminum Alloys to 22MnB5, DP980 Steels and the Structure–Property Relationship of a Strongly Bonded Interface

Metallurgical and Materials Transactions A - The ability to weld high-strength aluminum to high-strength steel is highly desired for vehicle lightweighting but difficult to attain by conventional...     

Effects of Metmyoglobin Reducing Activity and Thermal Stability of NADH‐Dependent Reductase and Lactate Dehydrogenase on Premature Browning in Ground Beef

Premature browning is a condition wherein ground beef exhibits a well‐done appearance before reaching the USDA recommended internal cooked meat temperature of 71.1 °C; however, the mechanism is unclear. The objectives of this study were: (1) to determine the effects of packaging and temperature on metmyoglobin reducing activity (MRA) of cooked ground beef patties and (2) to assess the effects of temperature and pH on thermal stability of NADH‐dependent reductase, lactate dehydrogenase (LDH), and oxymyoglobin (OxyMb) in‐vitro. Beef patties (lean: fat = 85:15) were packaged in high‐oxygen modified atmosphere (HiOX‐MAP) or vacuum (VP) and cooked to either 65 or 71 °C. Internal meat color and MRA of both raw and cooked patties were determined. Purified NADH‐dependent reductase and LDH were used to determine the effects of pH and temperature on enzyme activity. MRA of cooked patties was temperature and packaging dependent (P < 0.05). Vacuum packaged patties cooked to 71 °C had greater (P < 0.05) MRA than HiOX‐MAP counterparts. Thermal stability of OxyMb, NADH‐dependent reductase, and LDH were different and pH‐dependent. LDH was able to generate NADH at 84 °C; whereas NADH‐dependent reductase was least stable to heat. The results suggest that patties have MRA at cooking temperatures, which can influence cooked meat color.     

Synthesis and Superior Optical‐Limiting Properties of Fluorene‐Thiophene‐Benzothiadazole Polymer‐Functionalized Graphene Sheets

A polymer based on fluorene, thiophene, and benzothiadazole as the donor–spacer–acceptor triad is covalently coupled to reduced graphene oxide (rGO) sheets via diazonium coupling with phenyl bromide, followed by Suzuki coupling. These polymer–graphene hybrids show good solubility in organic solvents, such as chloroform, tetrahydrofuran (THF), toluene, dichlorobenzene, and N,N‐dimethylformamide (DMF), and exhibit an excellent optical‐limiting effect with a 532‐nm laser beam. The optical‐limiting threshold energy values (0.93 J cm^?2 for G–polymer 1 and 1.12 J cm^?2 for G–polymer 2) of these G–polymer hybrids are better than that of carbon nanotubes (3.6 J cm^?2).     

Improved properties and thermal stability of a titanium-stainless steel solid-state weld with a niobium interlayer

Stainless steel (SS) and titanium alloys can be welded in the solid-state by high speed oblique impact.Here,the effect of a niobium (Nb) interlayer on weld strength and thermal stability is evaluated.Both Ti/SS and Ti/Nb/SS welds were subjected to thermal exposure ranging from 300 ℃ to 950 ℃ for 1.5 h.Thermal exposure monotonically decreases the strength and toughness of the Ti/SS pair with a dramatic falloffin strength and change in failure mode from partial pullout failure to full interfacial fracture at 600℃.With the interlayer,toughness was increased versus baseline up to 700 ℃ thermal exposure and then intermetallic formation again caused falloff in properties.Guidelines for the production,properties and applications of these classes of welds are provided.