The radial spreading as a free surface layer of a vertical buoyant jet

Summary When the rising plume in a stagnant ambient fluid impinges the free surface it spreads radially as a surface layer flowing over a pool of heavier liquid. Initially the surface layer in the entrainment zone entrains the underlying fluid, but the entrainment decreases with the increasing distance from the boil. The radius of the entrainment zone depends on the initial buoyancy flux from the nozzle and also on submergence height. It was assumed that the flow in this zone has a self-preserving form. The theoretical results based upon this assumption showed that the maximum velocity and density difference of the layer decreases as powers of radius distance measured from centre of the boil and the depth varies linearly with the radius, so that the sectional Richardon's number based on maximum physical quantities of the section remain unchanged. It was further shown that the coefficient of the entrainment remains constant and is a function of the Richardson's number and the slope of the interface. The theoretical results were compared with those obtained experimentally and fair agreement was obtained.At the end of the entrainment zone the surface layer enters the zone of homogeneous flow in which the layer travels over the underlying fluid and behaves much like a free homogeneous flow over a rigid boundary: the friction at the interface replacing the friction of the boundary. In this zone the mean velocity of the layer in the radial direction was measured and found that it decreases inversely with the increase of radius. The thickness of the layer in the zone of homogeneous flow remains constant and depends, as far as experiments show, greatly on the submergence height.     

Exploring the conformational space of cyclic peptides by a stochastic search method

A stochastic search algorithm is applied in order to probe the conformations of cyclic peptides. The search is conducted in two stages. In the first stage, random conformations are generated and evaluated by a penalty function for ring closure ability, following a stepwise construction of each amino acid into the peptide by a random choice of one of its allowed conformations. The allowed conformational ranges of backbone dihedral angles for each amino acid have been extracted from a Data Bank of diverse proteins. Values of dihedral angles that do not contribute favorably to the scoring of ring closure are retained or discarded by a statistical test. Values are discarded up to a point from which all remaining combinations of angles are constructed, scored, sorted, and clustered. In the second stage, side chains have been added and fast optimization was applied to the set of diverse conformations in a "united atoms" approach, with the "Kollman forcefield" of Sybyl 6.8. This iterative stochastic elimination algorithm finds the global minimum and most of the best results, when compared to a full exhaustive search in appropriately sized problems. In larger problems, we compare the results to experimental structures. The root mean square deviation (RMSD) of our best results compared to crystal structures of cyclic peptides with sizes from 4 to 15 amino acids are mostly below 1.0 A up to 8 mers and under 2.0 A for larger cyclic peptides.     

An Antilock-Braking Algorithm for an Eddy-Current-Based Brake-By-Wire System

This paper presents a nonlinear sliding-mode-type controller for slip regulation in a braking event for an electromagnetic brake-by-wire (BBW)-system-equipped automobile. The electromagnetic BBW system under consideration consists of a set of eddy current brakes (ECBs) attached to the automobile wheels. The antilock-braking controller modifies the brake torque command generated by a supervisory controller which, in turn, is based on the driver's command sensed via brake pedal sensors. The modified brake torque command is then generated by a closed-loop actuator control algorithm to control the ECB system. It is shown in this paper that the proposed antilock-braking control system is stable in the sense of Lyapunov. Experimental results are presented for a test vehicle equipped with an eddy-current-based BBW system. Experimental results show that the proposed antilock brake control algorithm provides very good slip regulation in a braking event on low friction-coefficient surfaces (wet jennite) when compared with that of a braking event without the proposed antilock-braking control. Experimental results also indicate that the proposed antilock-braking control system provides a smooth stop for the vehicle     

An Empirical Study of Factors Affecting e-Commerce Adoption among Small- and Medium-Sized Enterprises in a Developing Country: Evidence from Malaysia

The purpose of this paper is to empirically examine determinants of e-commerce adoption among Malaysian small- and medium-sized enterprises (SMEs). This study tested eight hypotheses on determinants affecting e-commerce adoption with empirical data from several survey instruments: an online questionnaire-based survey, mailed survey and questionnaire collected in-person from a sample of 307 SMEs in Malaysia. The findings show that e-commerce adoption within Malaysian SMEs is affected by perceived relative advantage, perceived compatibility, managers/owner's knowledge and expertise, management characteristics and external change agents. This study contributes to enhancing the understanding of the determinants of adopting e-commerce in SMEs and provides some interesting perspective from Malaysia. Those parties interested in promoting their business online may find these results helpful in guiding their efforts.     

Asynchronous algorithms for poisson's equation with nonlinear boundary conditions

Poisson's equation with nonlinear boundary conditions is discretized with the method of lines to obtain a system of second order differential equations with multi-point boundary conditions. This differential system is converted, using invariant imbedding for each one-dimensional problem, into a fixed point problem and then the asynchronous algorithms are applied.     

Ameliorating Effects of Exogenously Applied Proline on Seed Composition,Seed Oil Quality and Oil Antioxidant Activity of Maize (Zea mays L.) under Drought Stress

This study was carried out to appraise whether or not the exogenous application of a potential osmoprotectant, proline, could ameliorate the adverse effects of drought stress on maize seed and seed oil composition, as well as oil antioxidant activity. Water stress reduced the kernel sugar, oil, protein and moisture contents and most of the seed macro- and micro-elements analyzed in both maize cultivars but it increased the contents of seed fiber and ash. Water stress increased the oil oleic acid content with a subsequent decrease in the amount of linoleic acid, resulting in an increased oil oleic/linoleic ratio for both maize cultivars. However, no variation was observed in oil stearic and palmitic acids content due to water stress. A considerable drought induced an increase in seed oil α-, γ-, δ- and total tocopherols and flavonoids were observed in both maize cultivars. However, oil phenolic and carotenoid content as well as 1,1-diphenyl-2-picryl-hydrazyl (DPPH) free radical scavenging activity decreased. Foliar-applied proline significantly increased the content of seed sugar, oil, protein, moisture, fiber and ash in both maize cultivars under well irrigated and water deficit conditions. Furthermore, exogenous application of proline increased the oil oleic and linoleic acid contents. The concentrations of antioxidant compounds namely phenolics, carotenoids, flavonoids and tocopherols estimated in the seed oil increased due to foliar-applied proline under water deficit conditions that was positively correlated with the enhanced oil DPPH free radical scavenging activity. Moreover, the increase in the contents of these antioxidant compounds and oil antioxidant activity due to the foliar application of proline was noted to be more pronounced under water deficit conditions.     

Development of a semi-quantitative food frequency questionnaire for use in United Arab Emirates and Kuwait based on local foods

Background  

The Food Frequency Questionnaire (FFQ) is one of the most commonly used tools in epidemiologic studies to assess long-term nutritional exposure. The purpose of this study is to describe the development of a culture specific FFQ for Arab populations in the United Arab Emirates (UAE) and Kuwait.     

Application of linearized power system model to selection of PST controller input signal

This paper presents a selection method for phase shift transformer PST controller input signal. Simple conditions of input signal selection are obtained using frequency response analysis. The proposed method requires a suitable modeling of power system including PST device. The two types of power system models described in this paper are the nonlinear equations system model and the linearized model. The linearized model is represented as a block diagram transfer function model and as a state space representation model. The block diagram model presented in this paper has been used for the PST feedback input signal selection. Five locally available measurements at the switching node of the PST are considered. The results of frequency domain tests have confirmed that the block diagram transfer function model is a useful tool for power system analysis. The LQR method is used to achieve the final verification and the choice of input control signal.     

Structural and magnetic properties of Zn1-xcoxO nanorods prepared by microwave irradiation technique

We have successfully synthesized large-scale aggregative flowerlike Zn1-xCo(x)O (0.0 < or = x < or = 0.07) nanostructures, consisting of many branches of nanorods at different orientations with diameter within 100-150 nm (tip diameter approximately 50 nm) and length of approximately 1 microm. The rods were prepared using Zinc nitrate, cobalt nitrate and KOH in 180 Watt microwave radiation for short time interval. The synthesized nanorods were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), field emission transmission electron microscopy (FETEM) and DC magnetization measurements. XRD and TEM results indicate that the novel flowerlike nanostructures are hexagonal with wurtzite structure and Co ions were successfully incorporated into the lattice position of Zn ions in ZnO matrix. The selected area electron diffraction (SAED) pattern reveals that the nanorods are single crystal in nature and preferentially grow along [0 0 1] direction. Magnetic studies show that Zn1-xCo(x)O nanorods exhibit room temperature ferromagnetism. This novel nanostructure could be a promising candidate for a variety of future spintronic applications.     

Advances in Epoxy/Graphene Nanoplatelet Composite with Enhanced Physical Properties: A Review

In this review, development from graphene nanoplatelet, that is, comprised of short bulk of single layer graphene, into modified-polymer/graphene nanoplatelet composite is presented. Preparation methods of graphite, graphene, and graphene nanoplatelets have also been discussed. Graphene nanoplatelet and modified graphene nanoplatelet commend unique properties to composites such as excellent thermal and electrical conductivity as well as mechanical and barrier properties. Graphene nanoplatelet fabrication techniques by solution mixing, melt blending, and in situ polymerization are also discussed. Excellent dispersion of nanoplatelets in polymer/graphene nanoplatelet depends upon the selection of suitable fabrication technique. Moreover, the corresponding significance, exploitation, challenges, and future aspect of polymer/graphene nanoplatelet-based material is overviewed.