Tailoring Effective FeOx/SiO2 Catalysts in Methane to Formaldehyde Partial Oxidation

A preparation method of highly effective methane to formaldehyde partial oxidation (MPO) FeO_x/SiO₂ catalysts (Fe 0.09--0.43 wt%) is reported, based on adsorption-precipitation (ADS/PRC) of Fe^II ions under controlled conditions. The performance of ADS/PRC catalysts in the MPO reaction at 650 °C has been compared with that of conventional systems prepared by incipient wetness (INC/WET) of silica carriers with aqueous solutions of Fe^III. The ADS/PRC method, likely enabling a higher dispersion of the active phase, provides very effective MPO catalysts featuring CH₄ turnover frequency (TOF) and HCHO productivity (STY_HCHO) values larger than those of the counterpart INC/WET systems.     

Preparation and optical characterization of photosensitive multilayered structures based on polythiophenes and tetracyanoquinodimethane

Organic double layers obtained by electrodeposition of a substituted polythiophene followed by spin-coating of a Tetracyanoquinodimethane (TCNQ) electron acceptor layer, are characterized by means of spectrophotometric measurements carried out in the UV-VIS-IR range. According to the optical data, the electron acceptor molecules reduce to the singly ionized state as a consequence of a charge-transfer reaction that takes place at the interface with the electrodeposited polymer, which acts as an electron donor. Rectifying heterojunctions are obtained by depositing the double layers on the top of monocrystalline silicon wafers, and on the top of monocrystalline silicon wafers coated with electrochemically de-doped poly(3,4-ethylendioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS). Current versus voltage measurements performed in the dark and under halogen light irradiation show that the developed heterojunctions exhibit photosensitive charge transport features, promising in view of photovoltaic applications.     

Utilization of electrochemical impedance spectroscopy for monitoring bornite (Cu5FeS4) oxidation by Acidithiobacillus ferrooxidans

In this work, the monitoring of the bacterial and chemical dissolution of bornite was evaluated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS); the mineral surface was examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The analysis of CV results allowed attributing the different peaks observed in both direct and reverse potential scanning to the oxidation of bornite to a secondary covellite and its reduction via different non stoichiometric copper sulphides intermediaries. EIS data for bornite were obtained in control medium up to 78 h of immersion, when a cellular suspension of A. ferrooxidans was added and the experiments continued up to a 192 h of test. The EIS response was different when bacteria were added in the beginning of the test or after some hours of immersion in acid solution. The experiments were performed in different cell configurations and a model of the electrode/electrolyte interface. The correspondent equivalent electrical circuit was used to fit impedance spectra for all studied conditions. A common equivalent circuit used for corrosion processes where anodic (degradation of the mineral) and cathodic (oxygen reduction) reactions occur in parallel, together film and biofilm formation was proposed.     

Arginine dihydrolase pathway in Lactobacillus plantarum from orange.

Lactobacillus plantarum N8 and N4 strains isolated from orange degraded L-arginine to citrulline, ornithine and ammonia. Citrulline and ornithine were consumed. Lactobacillus plantarum N4 utilized arginine and ornithine to a higher extent than Lactobacillus plantarum N8. Urea was not detected during arginine degradation, indicating that the amino acid degradation was carried out only by the arginine dihydrolase pathway. Citrulline increased the growth of the two strains, arginine only increased the growth of Lactobacillus plantarum N4. Ornithine did not modify the growth of the strains studied. With different behavior, Lactobacillus plantarum N8 and N4 strains were able to derive energy and ammonia from arginine or citrulline catabolism. This is interesting for microorganisms developing in a stressful environment.     

The GWP-Chart: An environmental tool for guiding urban planning processes. Application to concrete sidewalks

The systematized study of urban morphology has led to the development of integrated tools based on the knowledge of the relation between physical density and urban form. These tools do help planners and decision makers; however, environmental data is rarely included in them.This paper presents the GWP-Chart, a method that combines urban planning tools with environmental data, obtained through the use of the life cycle assessment (LCA) results. In order to explain its use, three urban fabrics have been selected. According to their morphology and their ground space index (GSI) and public space ratio (PSR) values, the contribution of the sidewalk subsystem to the global impact per square meter of urban development can be quantified and communicated.The GWP-Chart is applicable to all types of urban fabrics and scales (street or square, island, fabric or district), as well as adaptable to any urban infrastructure or subsystem and can be extended to other environmental impacts. Its advantages lie in its accurateness, adaptability and ease of interpretation.     

Research on heterocyclic compounds, Part 40. 2-Phenylimidazo[1,2-a]pyridine-3-carboxylic acid derivatives: synthesis and antiinflammatory activity

A series of 2-phenylimidazo[1,2-a]pyridine-3-carboxylic esters, acids, and amides were synthesized and pharmacologically tested in order to evaluate their antiinflammatory and analgesic activity and their ulcerogenic action on the gastro-intestinal tract. The most active member of this series of compounds was found to be 6-methyl-2-phenylimidazo[1,2-a]pyridine-3-carboxylic acid (5c).