Micromolar determination of sulfur oxoanions and sulfide at a renewable sol-gel carbon ceramic electrode modified with nickel powder

The sol-gel technique was used to fabricate nickel powder carbon composite electrode (CCE). The nickel powder successfully used to deposit NiO_x thin film on conductive carbon ceramic electrode for large surface area catalytic application. Repetitive cycling in potential range −0.2 to 1.0 V was used to form of a thin nickel oxide film on the surface carbon composite electrode. The thin film exhibits an excellent electro-catalytic activity for oxidation of SO₃²⁻, S₂O₄²⁻, S₂O₃²⁻, S₄O₆²⁻ and S²⁻ in alkaline pH range 10-14. Optimum pH values for detection of all sulfur derivatives is 13 and catalytic rate constants are in range 2.4 × 10³-8.9 × 10³ M⁻¹ s⁻¹. The hydrodynamic amperometry at rotating modified CCE at constant potential versus reference electrode was used for detection of sulfur derivatives. Under optimized conditions the calibration plots are linear in the concentration range 10 μM-15 mM and detection limit 1.2-34 μM and 0.53-7.58 nA/μM (sensitivity) for electrode surface area 0.0314 cm². The nickel powder doped modified carbon ceramic electrode shows good reproducibility, a short response time (2.0 s), remarkable long term stability, less expense, simplicity of preparation, good chemical and mechanical stability, and especially good surface renewability by simple mechanical polishing and repetitive potential cycling. This sensor can be used into the design of a simple and cheap chromatographic amperometry detector for analysis of sulfur derivatives.     

Bioactive Carboxymethyl Starch-Based Hydrogels Decorated with CuO Nanoparticles: Antioxidant and Antimicrobial Properties and Accelerated Wound Healing In Vivo

In this study, nanocomposite hydrogels composed of sodium carboxymethylated starch (CMS)-containing CuO nanoparticles (CMS@CuO) were synthesized and used as experimental wound healing materials. The hydrogels were fabricated by a solution-casting technique using citric acid as a crosslinking agent. They were characterized by Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and thermogravimetric analysis (TGA) to evaluate their physicochemical properties. In addition, swelling, antibacterial activities, antioxidant activities, cytotoxicity, and in vivo wound healing were investigated to evaluate the wound healing potential of the CMS@CuO nanocomposite hydrogels. Growth inhibition of the Gram-positive and Gram-negative pathogens, antioxidant activity, and swelling were observed in the CMS@CuO nanocomposite hydrogels containing 2 wt.% and 4 wt.% CuO nanoparticles. The hydrogel containing 2 wt.% CuO nanoparticles displayed low toxicity to human fibroblasts and exhibited good biocompatibility. Wounds created in rats and treated with the CMS@2%CuO nanocomposite hydrogel healed within 13 days, whereas wounds were still present when treated for the same time-period with CMS only. The impact of antibacterial and antioxidant activities on accelerating wound healing could be ascribed to the antibacterial and antioxidant activities of the nanocomposite hydrogel. Incorporation of CuO nanoparticles in the hydrogel improved its antibacterial properties, antioxidant activity, and degree of swelling. The present nanocomposite hydrogel has the potential to be used clinically as a novel wound healing material.     

Floodplain Inundation Analysis Combined with Contingent Valuation: Implications for Sustainable Flood Risk Management

This study presents the results of open-ended contingent valuation method (CVM) to estimate the residents’ maximum willingness to pay (WTP) for flood insurance and structural flood control measures in the Neka River Basin in Northern Iran. Flood inundation analysis and floodplain risk mapping were conducted by applying the HEC-RAS model combined with GIS analysis. A calibrated 100-year flood risk inundation map was considered as a basis for this research. This paper demonstrates applicability of CVM combined with flood inundation analysis to understand public participation for flood risk management, and their perception of flooding, considering associated socioeconomic and environmental factors. The results have shown that stated WTPs significantly varies with household income, distance people live from the river and the land use type of properties. Findings of this study suggest that the majority of respondents view flood hazard as the most important natural disaster. Furthermore, WTPs are significantly higher for those who have high level of flood risk perception. Three policy options for flood risk management are discussed, which include flood zoning and land use regulation, flood insurance program, and structural measure of levee construction. The advantages and disadvantages of each option are explored. It was concluded that a combination of possible mitigation options should be considered in order to achieve sustainable flood risk management in the Neka River Floodplain.     

Numerical Simulation of Droplet Impact on Patterned Surfaces

This work presents numerical simulation results for molten nickel and zirconia (YZS) droplets impacting on different microscale-patterned surfaces of silicon. The numerical simulation clearly showed the effect of surface roughness and solidification on the shape of the final splat, as well as the pore creation beneath the sprayed material. Simulations were performed using computational fluid dynamic software, SimDrop. The code uses a three-dimensional finite-difference algorithm solving the full Navier-Stokes equation, including heat transfer and phase change. A volume of fluid (VOF) tracking algorithm is used to track the droplet-free surface. Thermal contact resistance at the droplet-substrate interface is also included in the model. Specific attention is paid to the simulation of droplet impact under plasma spraying conditions. Droplet sizes ranged from 15 to 60 microns with initial velocities of 70-250 m/s. Substrate surfaces were patterned with regular arrays of cubes 1-3 μm high, spaced either 1 μm or 5 μm from each other. Different splat morphologies produced by simulations are compared with those obtained from the experiment conducted under the same impact and surface conditions. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

The effect of a TEG additive on hydrate formation

In gas industry, gas hydrate formation has both advantages and disadvantages. The best advantage of gas hydrate is Persian Gulf water sweetening, carbon dioxide capture, and gas storage, and its drawbacks are pressure drop, plugging, and explosion in pipelines. In recent years, using the inhibitors to prevent hydrate formation is being considered among researchers. In this study, the new equilibrium data for hydrate formation of inlet natural gas to Gachsaran NGL-1200 refinery with addition of Tri ethylene glycol (TEG) with mass concentration of 5% and 15% in distilled and Persian Gulf waters were measured by constant-volume method. The experimental results show that the hydrate formation conditions will be hard with the increase of TEG concentration in distillated and Persian Gulf waters. In other words, TEG addition to Persian Gulf water had more inhibitory effect in hydrate formation than TEG addition to distilled water. The hydrate formation temperature, in pressure range of 28–29 bars, reduced 0.3°C and 2.7°C for distilled water and 2.8°C and 4.6°C for Persian Gulf water in presence of TEG with mass concentration of 5% and 15%, respectively.     

Influence of process variables on biooxidation of ferrous sulfate by an indigenous Acidithiobacillus ferrooxidans. Part I: Flask experiments

Biological oxidation of ferrous sulfate by Acidithiobacillus ferrooxidans has proved to be a significant step in the bioleaching of sulfide minerals and the treatment of acid mine drainage. The same bioreaction also has beneficial applications in the desulphurization of coal and removal of hydrogen sulfide from gaseous effluents. In this research, the effects of some process variables such as pH, temperature, elemental sulfur, amount of initial ferrous and magnesium ions on oxidation of ferrous sulfate by a native A. ferrooxidans, which was isolated from a chalcopyrite concentrate, were investigated. All experiments carried out in shake flasks at 33 °C that was obtained as optimum temperature for the specific bacterial growth rate. The optimum range of pH for the maximum growth of the cells and effective biooxidation of ferrous sulfate varied from 2 to 2.3. The maximum biooxidation rate was achieved 1.2 g/L h in a culture initially containing 20.2 g/L Fe²⁺. Mg²⁺ from 20 mg/L to 120 mg/L did not have any effect on the efficiency of the process, while the presence of elemental sulfur had negative effect on the biooxidation.     

Residual stresses due to gas arc welding of aluminum alloy joints by numerical simulations

This study deals with the numerical simulation of the gas arc welding process of Aluminum tee joints using finite element analysis and evaluation of the effect of welding parameters on residual stress build up. The 3D simulations are performed using ABAQUS code for thermo-mechanical analyses with moving heat source, material deposition, solid-liquid phase transition, temperature dependent material properties, metal elasticity and plasticity, and transient heat transfer. Quasi Newton method is used for the analysis routine and thermo-mechanical coupling is assumed; i.e. the thermal analysis is completed before performing a separate mechanical analysis based on the thermal history. The residual stress build up and temperature history state in a three-dimensional analysis of the tee joint is then compared to experimental results. Hole drilling method is used for measuring the residual stress, while temperature history is measured by thermocouples. After carrying out numerical simulations, the effects of voltage/current, welding speed, material thickness and size of electrode on residual stress build-up and resulting distortions are evaluated.