An image composition algorithm for handling global visual effects

Image composition is widely used in television and film industry to create synthetic visual effects. It requires seamless integration of different parts of two or more images into a single image. Existing image composition techniques only change the local contents of the resulting image while in many cases local changes may also require some global effects as well. For example, if the image of sun from one image is transferred to another image, the global brightness pattern should also be transferred. Unfortunately existing techniques cannot handle global effects of local content manipulations. This paper describes a novel image composition technique which captures global effects associated with a specific local content from one image and incorporates in the second image. In our proposed technique, all images are transformed to the frequency domain. The composite image is created in frequency domain by mixing different frequencies from multiple images and then transformed back to the spatial domain. We have experimented the proposed technique to shift the image of sun along with its global brightness pattern, the global effects of rain and also for transferring global texture pattern from one image to the other. In most of the cases the results produced by our algorithm appear far close to real images than state of the art existing image composition techniques.     

Unusual swelling behavior of polymer-clay nanocomposite hydrogels

The swelling behavior and the elastic properties of nanocomposite hydrogels have been investigated. The hydrogels were prepared by free-radical polymerization of the monomers acrylamide (AAm), N,N-dimethylacrylamide (DMA), and N-isopropylacrylamide (NIPA) in aqueous clay suspensions at 21 °C. Laponite with a radius of gyration in distilled water of 20 nm was used as clay particles in the hydrogel preparation. The reactions with AAm monomer were carried out in the presence of the chemical crosslinker N,N′-methylenebis(acrylamide) (BAAm). It was found that the volume of nanocomposite hydrogels immersed in water rapidly increases and attains a maximum value after about one day. Surprisingly, further increase in the swelling time results in the deswelling of the gels until they reach a limiting swelling ratio after about 5 days. This unusual swelling behavior is observable only when the clay concentration in the hydrogel is above the overlap threshold c^∗. Swelling measurements combined with the elasticity tests show that the effective crosslink density first decreases, but then increases with increasing time of swelling of the hydrogels. The results were explained in terms of the rearrangements of the highly entangled polymer chains and clay particles during the gel volume change.     

An experimental evaluation of visual similarity for HDR images

In this paper, we investigate visual similarity for high dynamic range (HDR) images. We collect crowdsourcing data through a web-based experimental interface, in which the participants are asked to choose one of the two candidate images as being more similar to the query image. Triplets forming the query-and-candidates sets are obtained by random sampling from existing HDR data sets. Experimental control factors include choice of tone mapping operator (TMO), choice of distance metric, and choice of image feature. The image features that we experiment with are chosen from the features that are commonly used in the usual low dynamic range setting including features learned via Convolutional Neural Networks. The set of image features also includes combined features where the combination coefficients are estimated using logistic regression. We compute correlations between human judgments and quantitative features to understand how much each feature contributes to visual similarity. Combined features yield nearly 84% agreement with human judgments when applied on tone mapped images. Though we observed that using common features directly on raw or linearly scaled HDR images yield subpar correlation estimates compared to using them on tone mapped HDR images, we did not observe significant effect due to the choice of TMO on the estimates. As an application, we propose an improvement to style-based tone mapping for more correctly imparting desired styles to HDR images with different characteristics.

     

Role of situational method engineering to improve visual information systems in agile distributed environment

Software product prone to continuous evolution due to increase in the use of technology. Therefore, more stakeholders are involved in software evolution increases the cost and complexity. This required optimization of resources and cost to handle evolution with Global Software Development (GSD) to utilize time zones efficiently. The significance challenge of GSD reports: time zone difference, geographical location, communication delays, knowledge sharing, control among stakeholders and development team. Because of these challenges, the requirements for development in GSD environment are also challenge as compared to on site development. Different requirement engineering methods have been used to improve the requirements analysis to deal with ambiguities and inconsistency in large set of requirements. The customization and tailoring of requirements according to changing project’s situations required to improve project development with reusing existing agile methods during requirement engineering phase. Moreover, complex information systems where heterogeneity is inevitable that implies the involvement of divergent stakeholders and necessitate a comprehensive framework to capture multidimensional viewpoints and fulfill aforementioned issues. Therefore, a situational multi-dimensional agile requirement engineering method has been proposed to support team and stakeholders’ viewpoints. The schema of the proposed method is based on challenges recognized by performing Literature Review. Then proposed method has been evaluated via experimental approach and statistical analysis conducted to validated reliability of data collected. This result is significant approved both practically and statistically that the proposed approach ease to use, implement, trained and increased productivity and performance. Hence, the experimental study for the evaluation of the proposed approach results concluded that, proposed approach is the important multimedia tool for supporting organization and distributed development team for information sharing, collaboration, product development.

     

Computer-based testing: An alternative for the assessment of Turkish undergraduate students

Virtually errorless high speed data processing feature has made computers popular assessment tools in education. An important concern in developing countries considering integrating computers as an educational assessment tool before making substantial investment is the effects of computer-based testing on students’ test scores as compared to paper-and-pencil tests. This study investigated whether test scores of Turkish students were different in the computer-based test and in the paper-and-pencil test, with forty-seven undergraduate students studying at a public university located in the Blacksea region of Turkey. Findings of this study showed that test scores of undergraduate students were not different in the computer-based test and in the paper-and-pencil test which led us to reach the conclusion that computer-based testing can be considered as a promising alternative technique for the undergraduate students in Turkey.     

Analysis of defects on BN nano-structures using high-resolution electron microscopy and density-functional calculations

Cubic boron nitride (c-BN) nucleation takes place on hexagonal boron nitride (h-BN) layers growing perpendicular to the substrate surface during thin film synthesis. Studies focused on the nucleation of the cubic phase suggest the possibility that transient phases and/or defects on these h-BN structures have a role in sp3-bonded cubic phase nucleation. In this study, we have investigated the nature, energetics, and structure of several possible defects on BN basal planes, including point defects, 4-, and 5-fold BN rings, that may possibly match the experimentally observed transient phase fine structure. TEM image observations are used to build approximate atomic models for the proposed structures, and DFT calculations are used to relax these structures while minimizing their respective total energies. These optimized atomic geometries are then used to simulate TEM images, which are compared to the experimentally observed structures. Data from DFT calculations and analysis of simulated images from the proposed atomic structures suggest that 4-fold BN rings are more likely to exist on the transient phase possibly leading to c-BN nucleation.     

Feature Selection for Detecting ICMPv6-Based DDoS Attacks Using Binary Flower Pollination Algorithm

Internet Protocol version 6 (IPv6) is the latest version of IP that goal to host 3.4 × 10³⁸ unique IP addresses of devices in the network. IPv6 has introduced new features like Neighbour Discovery Protocol (NDP) and Address Auto-configuration Scheme. IPv6 needed several protocols like the Address Auto-configuration Scheme and Internet Control Message Protocol (ICMPv6). IPv6 is vulnerable to numerous attacks like Denial of Service (DoS) and Distributed Denial of Service (DDoS) which is one of the most dangerous attacks executed through ICMPv6 messages that impose security and financial implications. Therefore, an Intrusion Detection System (IDS) is a monitoring system of the security of a network that detects suspicious activities and deals with a massive amount of data comprised of repetitive and inappropriate features which affect the detection rate. A feature selection (FS) technique helps to reduce the computation time and complexity by selecting the optimum subset of features. This paper proposes a method for detecting DDoS flooding attacks (FA) based on ICMPv6 messages using a Binary Flower Pollination Algorithm (BFPA-FA). The proposed method (BFPA-FA) employs FS technology with a support vector machine (SVM) to identify the most relevant, influential features. Moreover, The ICMPv6-DDoS dataset was used to demonstrate the effectiveness of the proposed method through different attack scenarios. The results show that the proposed method BFPA-FA achieved the best accuracy rate (97.96%) for the ICMPv6 DDoS detection with a reduced number of features (9) to half the total (19) features. The proven proposed method BFPA-FA is effective in the ICMPv6 DDoS attacks via IDS.     

The Double Edge Sword Based Distributed Executor Service

Scalability is one of the most important quality attribute of software-intensive systems, because it maintains an effective performance parallel to the large fluctuating and sometimes unpredictable workload. In order to achieve scalability, thread pool system (TPS) (which is also known as executor service) has been used extensively as a middleware service in software-intensive systems. TPS optimization is a challenging problem that determines the optimal size of thread pool dynamically on runtime. In case of distributed-TPS (DTPS), another issue is the load balancing b/w available set of TPSs running at backend servers. Existing DTPSs are overloaded either due to an inappropriate TPS optimization strategy at backend servers or improper load balancing scheme that cannot quickly recover an overload. Consequently, the performance of software-intensive system is suffered. Thus, in this paper, we propose a new DTPS that follows the collaborative round robin load balancing that has the effect of a double-edge sword. On the one hand, it effectively performs the load balancing (in case of overload situation) among available TPSs by a fast overload recovery procedure that decelerates the load on the overloaded TPSs up to their capacities and shifts the remaining load towards other gracefully running TPSs. And on the other hand, its robust load deceleration technique which is applied to an overloaded TPS sets an appropriate upper bound of thread pool size, because the pool size in each TPS is kept equal to the request rate on it, hence dynamically optimizes TPS. We evaluated the results of the proposed system against state of the art DTPSs by a client-server based simulator and found that our system outperformed by sustaining smaller response times.     

Reducing Dimensionality of Multi-regime Data for Failure Prognostics

Journal of Failure Analysis and Prevention - Over the last decade, the prognostics and health management literature has introduced many conceptual frameworks for remaining useful life predictions....     

Stress Reduction of 3D Printed Compliance‐Tailored Multilayers

Multilayered multi‐material interfaces are encountered in an array of fields. Here, enhanced mechanical performance of such multi‐material interfaces is demonstrated, focusing on strength and stiffness, by employing bondlayers with spatially‐tuned elastic properties realized via 3D printing. Compliance of the bondlayer is varied along the bondlength with increased compliance at the ends to relieve stress concentrations. Experimental testing to failure of a tri‐layered assembly in a single‐lap joint configuration, including optical strain mapping, reveals that the stress and strain redistribution of the compliance‐tailored bondlayer increases strength by 100% and toughness by 60%, compared to a constant modulus bondlayer, while maintaining the stiffness of the joint with the homogeneous stiff bondlayer. Analyses show that the stress concentrations for both peel and shear stress in the bondlayer have a global minimum when the compliant bond at the lap end comprises ≈10% of the bondlength, and further that increased multilayer performance also holds for long (relative to critical shear transfer length) bondlengths. Damage and failure resistance of multi‐material interfaces can be improved substantially via the compliance‐tailoring demonstrated here, with immediate relevance in additive manufacturing joining applications, and shows promise for generalized joining applications including adhesive bonding.