Effects of climate change on biomass production and substitution in north-central Sweden

In this study we estimate the effects of climate change on forest production in north-central Sweden, as well as the potential climate change mitigation feedback effects of the resulting increased carbon stock and forest product use. Our results show that an average regional temperature rise of 4 °C over the next 100 years may increase annual forest production by 33% and potential annual harvest by 32%, compared to a reference case without climate change. This increased biomass production, if used to substitute fossil fuels and energy-intensive materials, can result in a significant net carbon emission reduction. We find that carbon stock in forest biomass, forest soils, and wood products also increase, but this effect is less significant than biomass substitution. A total net reduction in carbon emissions of up to 104 Tg of carbon can occur over 100 years, depending on harvest level and reference fossil fuel.     

Electromigration in width transition copper interconnect

Electromigration (EM) experiments are conducted for submicron dual damascene copper interconnects with width transition. The direction of electron flow (from narrow-to-wide segment and wide-to-narrow segment) and the ratio of lengths (e.g. ratio of narrow-to-wide segment lengths) are found to be significant factors in determining the life-time of such interconnects. About 69% shorter EM life-time is obtained for the case of electron flow from narrow-to-wide segment, and thus to avoid over estimation of EM life-time of such interconnect system, the direction of the electron flow should be chosen appropriately in the reliability assessment. On the other hand, it is found that the width transition location is not the failure site, and finite element model is presented to explain the experimental findings.     

Soft computing‐based approach for optimal design of on‐chip comparator and folded‐cascode op‐amp using colliding bodies optimization

This paper presents an efficient approach for the optimal designs of two analog circuits, namely complementary metal oxide semiconductor) two‐stage comparator with p‐channel metal oxide semiconductor input driver and n‐channel input and folded‐cascode operational amplifier using a recently proposed meta‐heuristic‐based optimization algorithm named as colliding bodies optimization (CBO). It is a multi‐agent algorithm that does not depend upon any internal control parameter, making the algorithm extremely simple. The main objective of this paper is to optimize the metal oxide semiconductor (MOS) transistors' sizes using CBO in order to reduce the areas occupied by the circuits and to get better performance parameters of the circuits. Simulation Program with Integrated Circuit Emphasis simulation has been carried out by using the optimal values of MOS transistors' sizes and other design parameters to validate that CBO‐based design is satisfying the desired specifications. Simulation results demonstrate that the design specifications are closely met and the required functionalities are achieved. The simulation results also confirm that the CBO‐based approach is superior to the other algorithms in terms of MOS area and performance parameters like gain, power dissipation, etc., for the examples considered. Copyright © 2016 John Wiley & Sons, Ltd.     

Quantifying in-use PM measurements for heavy duty diesel vehicles

Heavy duty emissions regulations have recently expanded from the laboratory to include in-use requirements. This paradigm shift to in-use testing has forced the development of portable emissions measurement systems (PEMS) for particulate matter (PM). These PM measurements are not trivial for laboratory work, and are even more complex for in-use testing. This study evaluates five PM PEMS in comparison to UCR's mobile reference laboratory under in-use conditions. Three on-highway, heavy-duty trucks were selected to provide PM emissions levels from 0.1 to 0.0003 g/hp-h, with varying compositions of elemental carbon (EC), organic carbon (OC), and sulfate. The on-road driving courses included segments near sea level, at elevations up to 1500 m, and coastal and desert regions. The photoacoustic measurement PEMS performed best for the non-after treatment system (ATS)-equipped engine, where the PM was mostly EC, with a linear regression slope of 0.91 and an R(2) of 0.95. The PEMS did not perform as well for the 2007 modified ATS equipped engines. The best performing PEMS showed a slope of 0.16 for the ATS-equipped engine with predominantly sulfate emissions and 0.89 for the ATS-equipped engine with predominantly OC emissions, with the next best slope at 0.45 for the predominantly OC engine.     

Ductile-<Emphasis Type="Italic">to</Emphasis>-brittle transition in cenosphere-filled polypropylene composites

Cenosphere-filled polypropylene (PP) composites were fabricated and characterized for their structural/morphological and fracture mechanical behaviour. The fracture properties were studied following the essential work of fracture (EWF) approach based on post-yield fracture mechanics (PYFM) concept. The structural attributes and its consequent effects on the dynamic mechanical properties were characterized by wide angle X-ray diffraction (WAXD), hot-stage polarized light optical microscopy (PLOM) and dynamic mechanical analysis (DMA). The WAXD studies have revealed a decrease in crystallinity of the composites with increase in cenosphere content. PLOM studies reveals a threefold reduction in the diameter of the spherulite in case of composite with 10 wt% of cenosphere compared to that of PP followed by an increase of ~50% in the composite with 20 wt% of cenosphere compared to that of the composite with 10 wt% cenosphere. DMA revealed an enhancement in the energy dissipation ability of the composite with 10 wt% of cenosphere and an increase in the storage modulus up to ~30% in the composites relative to the soft PP phase. The non-essential work of fracture (NEWF: βw _p) as the resistance to stable crack propagation has shown a maximum at 10 wt% of cenosphere followed by a sharp drop at higher cenosphere content indicating a cenosphere-induced ductile-to-brittle transition (DBT). Fractured surface morphology investigations revealed that the failure mode of the composites undergo a systematic transition from matrix-controlled shear deformation to filler-controlled quasi-brittle modes above a cenosphere loading of 10 wt% in the composites reiterating the possibility of filler-induced semiductile-to-DBT transition.     

Characterization of highly hydrophobic coatings deposited onto pre-oxidized silicon from water dispersible organosilanes

The formation and quality of highly hydrophobic coatings deposited from water dispersible organosilanes onto pre-oxidized single crystal silicon were studied using atomic force microscopy, ellipsometry, dynamic contact angle measurements and electrochemical impedance spectroscopy (EIS). Highly hydrophobic films of a commercially available water dispersible silane and two different cationic alkoxysilanes were prepared by dip coating. It was found using atomic force microscopy that, in general, the structure of these highly hydrophobic films is a continuous film with some particulates attributed to bulk polymerization of the precursor molecule in water. Film defects were quantified using EIS by the value of charge transfer resistance at the hydrofluoric acid/silicon interface. Potential applications of this type of coatings include reduction/elimination of stiction in micro-electromechanical systems, contact printing in materials microfabrication, inhibition of corrosion and oxidation, prevention of water wetting, lubrication and protein adsorption.     

Frequency Specification Testing of Analog Filters Using Wavelet Transform of Dynamic Supply Current

Wavelet transform has the property of resolving signal in both time and frequency unlike Fourier transform. In this work, we show that time-domain information obtained from wavelet analysis of supply current can be used to test the frequency specification of analog filters efficiently. The pole/zero locations in the frequency response of analog filters shift due to change in component values with process variations. It is essential to test the filters for the shift in frequency response and fix it during production test. Wavelet analysis of supply current can be a promising alternative to test frequency specification of analog filters, since it needs only one AC stimulus and is virtually unaffected by transistor threshold variation. Simulation results on two test circuits demonstrate that we can estimate pole/zero shift with less than 3% error using only one measurement, which requires about 18 measurements in the conventional technique.Swarup Bhunia received the undergraduate degree from Jadavpur University, Calcutta, India, and the Masters degree from the Indian Institute of Technology (IIT), Kharagpur. He is currently working toward the Ph.D. degree in the Department of Electrical Engineering, Purdue University, West Lafayette, IN, USA. He has worked in the EDA industry on RTL synthesis and verification for about three years. His research interest includes design methodologies for high-performance low-power testable VLSI system, defect-based testing, noise analysis, and noise-aware design.Arijit Raychowdhury received the B.E. degree in 2001 in electronics and telecommunication engineering from Jadavpur University, India. He is currently pursuing the Ph.D. degree in electrical and computer engineering in Purdue University, West Lafayette, IN, USA. He has worked as an analog circuit designer in Texas Instruments India. His research interests include device/circuit design for scaled silicon and nonsilicon devices. He has received academic excellence awards in 1997, 2000, and 2001 and Messner Fellowship from Purdue University in 2002. Mr. Raychowdhury has been awarded the Best Student Paper Award in the IEEE Nanotechnology Conference, 2003.Kaushik Roy received the B.Tech. degree in electronics and electrical communications engineering from the Indian Institute of Technology, Kharagpur, India, and the Ph.D. degree from the Electrical and Computer Engineering Department, University of Illinois, Urbana, in 1990. He was with the Semiconductor Process and Design Center of Texas Instruments, Dallas, TX, where he worked on FPGA architecture development and low-power circuit design. He joined the electrical and computer engineering faculty, Purdue University, West Lafayette, IN, in 1993, where he is currently a Professor. His research interests include VLSI design/CAD with particular emphasis in low-power electronics for portable computing and wireless communications, VLSI testing and verification, and reconfigurable computing. He has published more than 250 papers in refereed journals and conferences, holds six patents, and is Co-Author of a book on Low Power CMOS VLSI Design (New York: Wiley). He was Guest Editor for a Special Issue on Low-Power VLSI in IEE Proceedings Computers and Digital Techniques (July 2002). Dr. Roy received the National Science Foundation Career Development Award in 1995, the IBM Faculty Partnership Award, AT&T/Lucent Foundation Award, Best Paper Awards at the 1997 International Test Conference and 2000 International Symposium on Quality of IC Design, 2003 IEEE Latin American Test Workshop, and 2003 IEEE Nano. He is on the Editorial Board of IEEE Design and Test, IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS, and IEEE TRANSACTIONS ON VLSI SYSTEMS. He was Guest Editor for a Special Issue on Low-Power VLSI in IEEE DESIGN AND TEST (1994), and for the IEEE TRANSACTIONS ON VLSI SYSTEMS (June 2000).     

Enhancing protein and sugar release from defatted soy flakes using ultrasound technology

This research focused on the use of high-power ultrasound prior to soy protein extraction to simultaneously enhance protein and sugar release in the extract. Defatted soy flakes dispersed in water were sonicated for 15, 30, 60 and 120 s using a bench-scale ultrasound unit. The ultrasonic amplitudes used were: 0, 21, 42, 63 and 84 μm_pp (peak-to-peak). The respective power densities were 0.30, 0.87, 1.53 and 2.56 W/ml. Scanning electron micrographs of sonicated samples showed the structural disruption of soy flakes. The particle size decreased nearly 10-fold following ultrasonic treatment at high amplitudes. Sonication at high amplitude for 120 s gave the highest increase in total sugar released (50%) and protein yield (46%) when compared with non-sonicated samples (control). Ultrasonic pretreatment was also carried out with and without cooling for temperature moderation. The heat generated during sonication had no significant effect on protein and sugar release from defatted soy flakes. The use of ultrasound can significantly improve protein yield and reduce the overall cost of producing soy protein from flakes.