Raman lidar monitoring of extinction and backscattering of African dust layers and dust characterization

Results on the monitoring of strong African dust outbreaks at Lecce in the southeastern corner of Italy (40 degrees 20' N, 18 degrees 6' E) during May 2001 are presented. This activity has been performed in the framework of the European Aerosol Research Lidar Network (EARLINET). The lidar station of Lecce is located on a flat rural area that is approximately 800 km from the northern Africa coast. So it is closer to Africa than most of all other EARLINET stations and allow monitoring African dust transport early in its life cycle, at all levels in the plume. An elastic-backscatter Raman lidar based on a XeF excimer laser (351 nm) has been used to monitor the time evolution and vertical structure of the dust layers and get independent measurements of the aerosol extinction and backscatter coefficients. The findings are presented in terms of vertical profiles of the extinction and backscatter coefficients and of the lidar ratio. A quite deep dust layer extending between 2 and 6 km and characterized by a backscatter coefficient of approximately 0.0016 (km sr)(-1), a lidar ratio of approximately 50 sr, and an aerosol optical depth of 0.26 was observed on 17 May 2001 between 18:55 and 20:07 UT. The layer persisted for approximately five days. Dust layers of lower optical thickness and shorter persistence time have generally been monitored at the lidar site during African dust outbreaks. Results on the chemical and morphological characterization of the dust collected at the lidar station are also given to further support the origin of the monitored aerosol layers.     

Melting and crystallization of UHMWPE skived film

Commercial skived film from ultra-high molecular-weight polyethylene (UHMWPE) with considerable uniaxial orientation of lamellae is studied by ultra-small-angle X-ray scattering (USAXS) and wide-angle X-ray scattering (WAXS) during melting and crystallization in order to identify its mechanisms of crystallization. For the analysis of the nanostructure two-dimensional USAXS patterns are analyzed by means of the multidimensional chord distribution function (CDF) method. WAXS shows that crystallization is always isotropic and fast. WAXS reflections are observed before—under certain processing conditions—the SAXS pattern becomes anisotropic. Thus crystallization is decoupled from a slower process of oriented nanostructure formation (nanoforming). If nanoforming is performed isothermally at 105 °C, the evolving nanodomain layers obtain some preferential orientation, as long as the orientation of the melt has not previously been erased by melt-annealing at temperatures of 140 °C or above. Crystallization at temperatures ≥110 °C followed by quenching leads to isotropic nanostructure. Although crystallization is always observed early in the WAXS patterns, the USAXS patterns exhibit only weak discrete scattering during isothermal treatment at temperatures of 110 °C and higher. At 105 °C anisotropic isothermal nanoforming starts after 1.5 min. The melting of the original material resembles an inverted random car-parking mechanism. Only next-neighbor correlations are observed among the crystalline layers. The average nanodomain layer thickness is only slightly increasing (26–30 nm), whereas the long period increase is strong (from 60 nm to 140 nm).     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

Gamma irradiation of PolyEthyleneTerephthalate and PolyEthyleneNaphthalate

The effect of gamma irradiation in air is investigated in two thermoplastic polyesters (PET and PEN), in order to evaluate the influence of aromatic density and the role of oxygen on radiation resistance. EPR measurements were carried out to detect radical stability against oxygen permeation and to provide radical characterization. Viscometric data reveal a different behaviour between films and thick samples. Positron annihilation spectra show a decrease of ortho-positronium intensity, which is more marked in film samples. ortho-positronium lifetime does not depend on the radiation dose.     

Evaluation of cortical bone by peripheral quantitative computed tomography in continuous ambulatory peritoneal dialysis patients

Several studies have suggested an increased prevalence of osteopenia in dialysis. Peripheral quantitative computed tomography (pQCT) is a new technique that allows the noninvasive evaluation of trabecular and cortical bone separately. The aim of the study was: (1) to evaluate cortical bone by pQCT in continuous ambulatory peritoneal dialysis (CAPD) patients and compare the data with that obtained in healthy controls; and (2) to correlate cortical bone parameters with bone mineral density (BMD) of the lumbar spine and femoral neck and total bone mineral content (TBMC). Cortical bone parameters were obtained in 22 CAPD patients and 27 healthy individuals at the distal radius using a Stratec XCT 960 pQCT machine. In the dialysis patients, we also determined BMD and TBMC by bone densitometry. Dialysis patients, compared with controls, showed a significant reduction in volumetric cortical BMD (VcBMD) (p = 0.04) and cortical thickness (cThk) (p < 0.0001) with a significant increase in radial total cross-sectional area (TA) (p = 0.006), endosteal circumference (p < 0.0001), and buckling ratio (p < 0.0001). In CAPD patients, total time on dialysis correlated negatively with radial total BMD (p < 0.01) and VcBMD (p < 0.01). Age correlated positively with TA (p < 0.01), endosteal (p < 0.01), and periosteal circumferences (p < 0.01). Serum intact parathyroid hormone (PTH) levels correlated positively with endosteal (p = 0.04) and periosteal perimeter (p = 0.01). Total alkaline phosphatase correlated negatively with VcBMD (p < 0.01), and positively with endosteal perimeter (p = 0.02). Total bone mineral content correlated significantly with radial cortical content (p < 0.001), cross-sectional cortical area (cA; p < 0.001), and cThk (p < 0.01) but not with total radial BMD, VcBMD, or buckling ratio. No correlations were found between radial cortical parameters and BMD measured at the lumbar spine or femoral neck. We conclude that dialysis patients show cortical osteopenia with marked cortical thinning partially mediated by PTH action on bone. Total bone mineral content correlated with various radial cortical parameters (content, area, and thickness) but not with others. No correlations were found between cortical bone parameters measured at the peripheral skeleton with areal bone density measured at the axial skeleton. These findings suggest that pQCT may be a new tool in the assessment of bone fragility in dialysis patients.     

Energy Production in Water Distribution Networks: A PAT Design Strategy

Pump operating as turbine (PAT) is an effective source of reducing the equipment cost in small hydropower plants. However, the manufacturers provide poor information on the PAT performance thus representing a limit for its wider diffusion. Additional implementation difficulties arise under variable operating conditions, characteristic of water distribution networks (WDNs). WDNs allow to obtain widespread and globally significant amount of produced energy by exploiting the head drop due to the network pressure control strategy for leak reductions. Thus a design procedure is proposed that couples a parallel hydraulic circuit with an overall plant efficiency criteria for the market pump selection within a WDN. The proposed design method allows to identify the performance curves of the PAT that maximizes the produced energy for an assigned flow and pressure-head distribution pattern. Finally, computational fluid dynamics (CFD) is shown as a suitable alternative for performance curve assessment covering the limited number of experimental data.     

Metal-Coated &lt;100&gt;-Cut GaAs Coupled to Tapered Parallel-Plate Waveguide for Cherenkov-Phase-Matched Terahertz Detection: Influence of Crystal Thickness

The influence of crystal thickness of metal-coated <100>-cut GaAs (M-G-M) on Cherenkov-phase-matched terahertz (THz) pulse detection was studied. The M-G-M detectors were utilized in conjunction with a metallic tapered parallel-plate waveguide (TPPWG). Polarization-sensitive measurements were carried out to exemplify the efficacy of GaAs in detecting transverse magnetic (TM)- and transverse electric (TE)-polarized THz waves. The reduction of GaAs’ thickness increased the THz amplitude spectra of the detected TM-polarized THz electro-optic (EO) signal due to enhanced electric field associated with a more tightly-focused and well-concentrated THz radiation on the thinner M-G-M. The higher-fluence THz beam coupled to the thinner M-G-M improved the integrated intensity of the detected THz amplitude spectrum. This trend was not observed for TE-polarized THz waves, wherein the integrated intensities were almost comparable. Nevertheless, good agreement of spectral line shapes of the superposed TM- and TE-polarized THz-EO signals with that of elliptically polarized THz-EO signal demonstrates excellent polarization-resolved detection capabilities of M-G-M via Cherenkov-phase-matched EO sampling technique.