Pressure drop prediction in hydraulic transport of bi-dispersed particles of coal and copper ore in pipeline

Hydraulic transport studies with coal and copper ore have been carried out in a 0.0254 m and a 0.019 m diameter pipeline to observe the effect of solids concentration, surface characteristics and particle size distribution on pressure drop. The coarse coal showed a lower pressure drop than the fines at any velocity of suspension, whereas copper ore, exhibited the opposite trend. It has been observed, that the pressure drop for hydraulic transportation of bi-dispersed particles is a minimum at certain weight proportions of coarse to fines, as compared to that for the transportation of either of the single size. Based on the experimental results, an empirical expression was developed for the prediction of pressure gradient.     

Modelling of the disulphide-swapped isomer of human insulin-like growth factor-1: implications for receptor binding

Insulin-like growth factor-1 (IGF-1) is a serum protein whichunexpectedly folds to yield two stable tertiary structures withdifferent disulphide connectivities; native IGF-1 [18–61,6–48,47–52]and IGF-1 swap [18–61,6–47, 48–52]. Here we demonstratein detail the biological properties of recombinant human nativeIGF-1 and IGF-1 swap secreted from Saccharomyces cerevisiae.IGF-1 swap had a ~30 fold loss in affinity for the IGF-1 receptoroverexpressed on BHK cells compared with native IGF-1.The parallelincrease in dose required to induce negative cooperativity togetherwith the parallel loss in mitogenicity in NIH 3T3 cells impliesthat disruption of the IGF-1 receptor binding interaction ratherthan restriction of a post-binding conformational change isresponsible for the reduction in biological activity of IGF-1swap. Interestingly, the affinity of IGF-1 swap for the insulinreceptor was ~200 fold lower than that of native IGF-1 indicatingthat the binding surface complementary to the insulin receptor(or the ability to attain it) is disturbed to a greater extentthan that to the IGF-1 receptor. A 1.0 ns high-temperature moleculardynamics study of the local energy landscape of IGF-1 swap resultedin uncoiling of the first A-region -helix and a rearrangementin the relative orientation of the A- and B-regions. The modelof IGF-1 swap is structurally homologous to the NMR structureof insulin swap and CD spectra consistent with the model arepresented. However, in the model of IGF-1 swap the C-regionhas filled the space where the first A-region -helix has uncoiledand this may be hindering interaction of Val44 with the secondinsulin receptor binding pocket.     

A new approach to integrate PLZT thin films with micro-cantilevers

In the present work, we report the preparation of PLZT thin films in pure perovskite phase by RF magnetron sputtering without external substrate heating and their integration with micro-cantilevers. The ‘lift-off’ process for patterning different layers of a micro-cantilever including PLZT, Pt/Ti and Au/Cr was employed. The basic requirement of lift-off process is that the deposition temperature should not exceed 200°C otherwise photoresist will burn out. Therefore, one of the aims of the present work was to prepare PLZT film at lower deposition temperatures, which can be subsequently annealed to form pure perovskite phase. This also strongly favours the incorporation of ‘lift-off’ process for patterning in the complete process flow. As no external substrate heating was required in the deposition of PLZT film, this objective has been successfully accomplished in the present work. The ‘lift-off’ process has been successfully adopted for patterning the composite layers of PLZT/Pt/Ti and Au/Cr using thick positive photo-resist (STR-1045). Different types of cantilever beams incorporating PLZT films have been successfully fabricated using ‘lift-off’ process and bulk micromachining technology. The proposed process can be advantageously applied for the fabrication of various MEMS devices.     

Synthesis and characterization of niobium-doped potassium tetragonal tungsten bronzes, KxNbyW1?yO3

Needle-shaped crystals of sizes up to 5 μm × 5 μm × 40 μm of nominal composition K _x Nb _y W_1−y O₃ were synthesized by solid state method at 800 °C using appropriate amount of WO₃, WO₂, Nb₂O₅, and K₂WO₄. The samples were characterized with XRD, SEM, microprobe analysis, optical spectroscopy, and Raman spectroscopy. The XRD patterns of the samples show single phase of tetragonal tungsten bronze (TTB) type (P4/mbm, No. 127) up to y = 0.07. Structure refinements reveal an increase in cell parameter with increasing nominal niobium content within the TTB phase. The elemental compositions of the crystals determined by electron microprobe analysis also show an increase in Nb content with increasing y. With increasing Nb content the reflectivity minimum in the near infrared spectral range shifts towards lower wavenumber indicating the effect of decreasing carrier concentration. Pyrochlore type phase (KNbWO₆) is obtained as a second phase when nominal composition y > 0.07.     

An intelligent traffic control system using RFID

Vehicular traffic control at road crossings has always been a matter of concern for administrations in many modern cities around the world. Several attempts have been made to design efficient automated systems to solve this problem. Most of the present day systems use predetermined timing circuits to operate traffic signals, which are not very efficient because they do not operate according to the current volume of traffic at the crossing. It is often seen in today's automated traffic control systems that vehicles have to wait at a road crossing even though there is little or no traffic in the other direction. There are other problems as well, such as ambulances getting caught up by a red traffic signal and wasting valuable time. Congestion is often translated into lost time, missed opportunities, lost worker productivity, delivery delay, and a general increased cost.     

Toughness in synthetic and biological multilayered systems

Toughness in hard biological tissues is associated with fibrous or lamellar structures that deflect or stop growing cracks. In some cases, such as nacreous shell, protein interlayers absorb much of the crack energy. In other tissues, such as tooth enamel, the toughness derives from the mineral microstructure, and the small amount of residual protein apparently has little effect. There have been a number of efforts to make tough synthetic materials using layered structures. In this work, freeform fabrication has been used to make layered structures with a view to introducing similar toughness into brittle materials. Results are presented for epoxy-glass composites with glass fabric interlayers, porous alumina back-filled with aluminium metal, and layered glass-ceramic/silver materials.     

Protonic polymer gel electrolytes based on carboxylic acids: ortho and inductive effects

The conductivity of polymer gel electrolytes containing three aromatic and three aliphatic carboxylic acids has been studied, viz. (i) ortho-, meta- and para-hydroxybenzoic acids and (ii) oxalic, malonic and succinic acids. Polymeric gels were prepared by adding different wt% of polymer poly(methylmethacrylate) (PMMA) in solutions of respective acids in high dielectric constant organic solvent mixtures of propylene carbonate, ethylene carbonate and dimethylformamide. The highest conductivity in the first of the above group of acids is for o-hydroxy benzoic acid and oxalic acid in the second group of acids. Results have been explained on the basis of ortho and/or inductive effects which depend upon the relative positions of the substituted hydroxyl (–OH) and carboxyl (–COOH) group or that of the two carboxylic groups.     

Addressing spatiotemporal and computational heterogeneity in structured adaptive mesh refinement

Structured adaptive mesh refinement (SAMR) techniques can provide accurate and cost- effective solutions to realistic scientific and engineering simulations modeling complex physical phenomena. However, the adaptive nature and inherent space–time heterogeneity of SAMR applications result in significant runtime management challenges. Moreover, certain SAMR applications involving reactive flows exhibit pointwise varying workloads and cannot be addressed by traditional parallelization approaches, which assume homogeneous loads. This paper presents hierarchical partitioning, bin-packing based load balancing, and Dispatch structured partitioning strategies to manage the spatiotemporal and computational heterogeneity in SAMR applications. Experimental evaluation of these schemes using 3-D Richtmyer–Meshkov compressible turbulence and 2-D reactive-diffusion kernels demonstrates the improvement in overall performance.     

3D head tracking under partial occlusion

A new algorithm for 3D head tracking under partial occlusion from 2D monocular image sequences is proposed. The extended superquadric (ESQ) is used to generate a geometric 3D face model in order to reduce the shape ambiguity during tracking. Optical flow is then regularized by this model to estimate the 3D rigid motion. To deal with occlusion, a new motion segmentation algorithm using motion residual error analysis is developed. The occluded areas are successfully detected and discarded as noise. Furthermore, accumulation error is heavily reduced by a new post-regularization process based on edge flow. This makes the algorithm more stable over long image sequences. The algorithm is applied to both synthetic occlusion sequence and real image sequences. Comparisons with the ground truth indicate that our method is effective and is not sensitive to occlusion during head tracking.