Determination of Linear Attenuation Coefficients of Materials by Using Timing Method

Abstract

In this work, gamma-ray linear attenuation coefficients of aluminum (Al) and lead (Pb) materials were determined by using timing method. The used setup is different from the conventional ones. The goal of the presented setup is the fact that it is used the timing technique. The detection system is composed of a 3″ × 3″ NaI(Tl) inorganic scintillation detector and related equipment together with ¹³⁷Cs and ⁶⁰Co radioactive sources. Obtained results are in good agreement with each other.     

A MIP based heuristic for capacitated MRP systems

Although Material Requirements Planning (MRP) is the most widely used production planning tool in today’s manufacturing companies, its inability to perform an exhaustive capacity planning, lack of a comprehensive and integrated shop floor extension and using constant and inflated lead times necessitate intelligent methods for developing cost effective production plans. A single optimization model might be employed to overcome these limitations, but it would be intractable to use it in large manufacturing systems. Hence, in this paper, we propose a heuristic method called Capacity Allocater and Scheduler, CAS, to eliminate drawbacks of MRP systems and provide solutions for large-scale instances. The CAS procedure, based on iteratively solving relaxed Mixed Integer Programming (MIP) models, is built on a lot sizing and scheduling framework, which considers both supply alternatives and lot size restrictions simultaneously. Finally, we give a detailed numerical example to demonstrate how CAS may be used in practice, and provide our concluding remarks.     

Role of disorder-order transformation in consolidation of ceramics

The ordering of stacking-disordered silicon carbide prepared from the elements by high energy ball milling was investigated during sintering. A sharp increase in density in the temperature region 1700–1800°C was associated with a decrease in the disorder. Samples which had low disorder density showed a more continuous sintering behavior with temperature. Highly dense (up to 99% relative density) SiC can be obtained at 1900°C under a pressure of 70 MPa with no hold time. Similar results were observed for structurally disordered carbon with 10 at% of boron. The sintering behavior exhibited an abrupt density increase in the narrow temperature region of 1450–1600°C and was associated with disorder-order transformation.     

Corrosion susceptibilities of various metals and alloys in synthetic geothermal brines

The corrosion susceptibilities of various pure metals and alloys were investigated in synthetic geothermal fluids. Rates of corrosion of AISI 1010 steel, types 304 and 316 stainless steels, Monel 400 and nickel were determined at three temperatures (296, 333 and 368 K); and those of the molybdenum, niobium and titanium were determined at 368 K only. Type 304 stainless steel appears to undergo an active-passive transition at a temperature range between 333 and 368 K. In the passive state type 304 steel has essentially the same corrosion rate as type 316. At 368 K the corrosion rate of pure nickel was approximately 2.5 times that of Monel, which in turn was twice that of type 316 stainless steel. The corrosion rates of Mo, Nb and Ti were less than one mdd at the highest experimental temperature.     

Spatially Adaptive Image Restoration Using Fuzzy Punctual Kriging

We present a general formulation based on punctual kriging and fuzzy concepts for image restoration in spatial domain. Gray-level images degraded with Gaussian white noise have been considered. Based on the pixel local neighborhood, fuzzy logic has been employed intelligently to avoid unnecessary estimation of a pixel. The intensity estimation of the selected pixels is then carried out by employing punctual kriging in conjunction with the method of Lagrange multipliers and estimates of local semi-variances. Application of such a hybrid technique performing both selection and intensity estimation of a pixel demonstrates substantial improvement in the image quality as compared to the adaptive Wiener filter and existing fuzzykriging approaches. It has been found that these filters achieve noise reduction without loss of structural detail information, as indicated by their higher structure similarity indices, peak signal to noise ratios and the new variogram based quality measures.     

Discovery of Five New Ethylene-Forming Enzymes for Clean Production of Ethylene in E. coli

Ethylene is an essential platform chemical with a conjugated double bond, which can produce many secondary chemical products through copolymerisation. At present, ethylene production is mainly from petroleum fractionation and cracking, which are unsustainable in the long term, and harmful to our environment. Therefore, a hot research field is seeking a cleaner method for ethylene production. Based on the model ethylene-forming enzyme (Efe) {"type":"entrez-protein","attrs":{"text":"AAD16440.1","term_id":"4323597","term_text":"AAD16440.1"}}AAD16440.1 (6vp4.1.A) from Pseudomonas syringae pv. phaseolicol, we evaluated five putative Efe protein sequences using the data derived from phylogenetic analyses and the conservation of their catalytic structures. Then, pBAD expression frameworks were constructed, and relevant enzymes were expressed in E. coli BL21. Finally, enzymatic activity in vitro and in vivo was detected to demonstrate their catalytic activity. Our results show that the activity in vitro measured by the conversion of α-ketoglutarate was from 0.21–0.72 μmol ethylene/mg/min, which varied across the temperatures. In cells, the activity of the new Efes was 12.28–147.43 μmol/gDCW/h (DCW, dry cellular weight). Both results prove that all the five putative Efes could produce ethylene.     

Recent developments in catalyst synthesis using DBD plasma for reforming applications

The catalyst has a significant role in gas processing applications such as reforming technologies for H₂ and syngas production. The stable catalyst is requisite for any industrial catalysis application to make it commercially viable. Several methods are employed to synthesize the catalysts. However, there is still a challenge to achieve a controlled morphology and pure catalyst which majorly influences the catalytic activity in reforming applications. The conventional methods are expansive, and the removal of the impurities are major challenges. Nevertheless, it is not straightforward to achieve the desired structure and stability. Therefore, significant interest has been developed on the advanced techniques to take control of the physicochemical properties of the catalyst through non-thermal plasma (NTP) techniques. In this review, the systematic evolution of the catalyst synthesis using NTP technique is elucidated. The emerging DBD plasma to synthesized and effective surface treatment is reviewed. DBD plasma synthesized catalyst performance in reforming application for H₂ and syngas production is summarised. Furthermore, the status of DBD plasma for catalyst synthesis and proposed future avenues to design environmentally suitable and cost-effective synthesis techniques are discussed.     

Effect of Bicarbonate Salts and Sequential Using of Frying Oil on Acrylamide and 5-Hydroxymethylfurfural Contents in Coated Fried Chicken Meat

In this research, the effect of different bicarbonate salts (sodium and ammonium) and their doses (0, 1, 2, and 3 g/100 g raw material) in the coating batter formula use and the sequential use of frying oil (1st, 2nd, 3rd, and 4th) on 5-hydroxymethylfurfural and acrylamide contents in coated fried chicken meat. The addition of sodium bicarbonate was efficient for reducing acrylamide content, but it increased browning and 5-hydroxymethylfurfural content compared to the control. When increasing the doses of sodium and ammonium bicarbonate from 1 to 3 g/100 g of raw material, the acrylamide content of samples did not change significantly, although adding sodium bicarbonate significantly reduced the acrylamide content as a control. These research results showed that using about 1 g/100 g raw material sodium bicarbonate rather than ammonium bicarbonate and as little frying oil as possible use during the production of coated and fried meat results in lower contents of 5-hydroxymethylfurfural and acrylamide.