Single-phase and binary phase nanogranular ferrites for magnetic hyperthermia application

The study demonstrates the performance of heating efficiency in single-phase and binary phase spinel ferrite nanosystems. Ferrimagnetic cobalt ferrite (CoFe₂O₄) (CFO) and superparamagnetic copper ferrite/copper oxide (CuFe₂O₄/CuO) (CuF) nanosystems of different particle sizes were synthesized through a microwave-assisted coprecipitation method. The heating behavior was observed in range of both field amplitudes (8-24 kA/m at 516 kHz) and frequencies (325-973 kHz at 12 kA/m). The heating efficiency was analyzed and compared by means of particle size, magnetization, effective anisotropy constant, and Néel relaxation mechanism. Indeed, the heating rate was maximized in larger ferrite particles with low effective anisotropy constant. Moreover, though the magnetization and effective anisotropy constant of single-phase CoFe₂O₄ nanoparticles were higher, the binary phase CuFe₂O₄/CuO nanosystems of similar crystallite size (28 nm) exhibited superior heating efficiency (4.21°C/s). For a field amplitude and frequency of 24 kA/m and 516 kHz, the heating rate of CuF and CFO ferrites with different crystallite sizes decreased in the order of 4.21 > 2.14 > 0.58 > 0.52°C/s for 29 nm > 25 nm > 12 nm > 15 nm, respectively. The results emphasize that binary phase ferrite nanoparticles are better thermoseeds than the single-phase ferrites for the magnetic hyperthermia application.     

New Formulation of a Methylseleno-Aspirin Analog with Anticancer Activity Towards Colon Cancer

Aspirin (ASA) has attracted wide interest of numerous scientists worldwide thanks to its chemopreventive and chemotherapeutic effects, particularly in colorectal cancer (CRC). Incorporation of selenium (Se) atom into ASA has greatly increased their anti-tumoral efficacy in CRC compared with the organic counterparts without the Se functionality, such as the promising antitumoral methylseleno-ASA analog (1a). Nevertheless, the efficacy of compound 1a in cancer cells is compromised due to its poor solubility and volatile nature. Thus, 1a has been formulated with native α-, β- and γ-cyclodextrin (CD), a modified β-CD (hydroxypropyl β-CD, HP-β-CD) and Pluronic F127, all of them non-toxic, biodegradable and FDA approved. Water solubility of 1a is enhanced with β- and HP- β-CDs and Pluronic F127. Compound 1a forms inclusion complexes with the CDs and was incorporated in the hydrophobic core of the F127 micelles. Herein, we evaluated the cytotoxic potential of 1a, alone or formulated with β- and HP- β-CDs or Pluronic F127, against CRC cells. Remarkably, 1a formulations demonstrated more sustained antitumoral activity toward CRC cells. Hence, β-CD, HP-β-CD and Pluronic F127 might be excellent vehicles to improve pharmacological properties of organoselenium compounds with solubility issues and volatile nature.     

A Holistic Approach on Junctionless Dual Material Double Gate (DMDG) MOSFET with High k Gate Stack for Low Power Digital Applications

Silicon - The 2D analytical models for electrostatic potential, threshold voltage, subthreshold swing, Drain Induced Barrier Lowering (DIBL) and drain current of the Dual Material Double Gate...     

Magnetocaloric and magneto-transport properties of Gd10Co20Si70 alloy

We report the results of magnetic, thermodynamic, transport and magnetocaloric effect (MCE) studies of newly synthesized Gd_(10)Co_(20)Si_(70) alloy. These measurements confirm an antiferromagnetic transition at T_N=9 K. Both MCE and magnetoresistance (MR) show quadratic dependence on the applied magnetic field, indicating the presence of spin fluctuations in the alloy. The maximum values of the magnetic entropy change determined from the isothermal magnetization data for magnetic field change of 7 and9 T are found to be 10.5 and 15.6 J/kg·K, respectively. As a consequence of the spin fluctuations effect, the MCE peaks are pulled towards high temperature side as asymmetrically broadened peak. The MR attains a large positive value of 73%at 2 K in 8 T. The large MR and reversible MCE make this alloy an attractive multifunctional magnetic material.     

Identification of Species Origin of Meat and Meat Products on the DNA Basis: A Review

The adulteration/substitution of meat has always been a concern for various reasons such as public health, religious factors, wholesomeness, and unhealthy competition in meat market. Consumer should be protected from these malicious practices of meat adulterations by quick, precise, and specific identification of meat animal species. Several analytical methodologies have been employed for meat speciation based on anatomical, histological, microscopic, organoleptic, chemical, electrophoretic, chromatographic, or immunological principles. However, by virtue of their inherent limitations, most of these techniques have been replaced by the recent DNA-based molecular techniques. In the last decades, several methods based on polymerase chain reaction have been proposed as useful means for identifying the species origin in meat and meat products, due to their high specificity and sensitivity, as well as rapid processing time and low cost. This review intends to provide an updated and extensive overview on the DNA-based methods for species identification in meat and meat products.     

Microwave freeze drying of sea cucumber (Stichopus japonicus)

Freeze drying (FD) yields the best quality of dried sea cucumber but at the cost of long drying time and also the overall cost. Air drying (AD) gives an unacceptably poor quality product. To achieve faster drying along with a high quality product a microwave freeze drying (MFD) technique was developed to dry sea cucumbers. The relationship between corona discharge and microwave power at various pressures and initial moisture content conditions was studied to avoid the possibility of corona discharge during MFD. According to the drying characteristics of MFD, a control strategy for the MFD process was also developed. MFD reduced the drying time by about half of conventional FD process and provided a similar good product quality.     

Octane number enhancement studies of naphtha over noble metal loaded zeolite catalysts

An Indian industrial naphtha containing mixture of various hydrocarbons belong to n-paraffins, isoparaffins, naphthenes and aromatics falling in C₅ to C₉ carbon range has been studied for its octane boosting through the production of isoparaffins over various Pt loaded zeolite catalysts possessing different acidity and porosity properties. Optimum balance of acid and metal functionalities in 0.6 wt.% Pt loaded on BEA zeolite helped in achieving highest increase in research octane number (RON) from 44 to 80, suitable for gasoline applications, through the production of lower isoparaffins (iC₄-iC₆) along with C₇+ isoparaffins.     

Evaporation of Ethanol-Water Mixture Drop on Horizontal Substrate

This study investigates the evaporation of sessile drop comprising ethanol and water mixture on horizontal poly methyl methacrylate surface. The contact angle (θ) and contact radius (R) of ethanol-water mixture drop are recorded with time, considering the impacts of presence of ethanol. With excess ethanol, the drop evaporation is principally controlled by a phase in which both the contact angle and contact radius are falling. A diffusional model assuming linear relation between contact radius and time is proposed as θ = eR ^?3 + cR ^?1, where e and c denote fitting coefficients. This model correlates with the experimental data.     

Immobilization of cholesterol oxidase and potassium ferricyanide on dodecylbenzene sulfonate ion‐doped polypyrrole film

Dodecylbenzene sulfonate (DBS)‐doped polypyrrole (PPY) conducting polymer films were electrochemically deposited onto the indium‐tin‐oxide (ITO)‐coated glass plates in aqueous medium. The enzyme cholesterol oxidase (ChOx) was immobilized on these DBS–PPY films by a physical adsorption technique. These ChOx‐immobilized DBS–PPY films were characterized by ultraviolet–visible and Fourier transform infrared spectroscopy. The enzyme activity studies indicate that ～40% of ChOx leaches out from the ChOx/DBS–PPY film. The ChOx activity in the ChOx/DBS–PPY film was assayed as a function of cholesterol concentration. The results of amperometric measurements conducted on ChOx/DBS–PPY/ITO film show linearity over the range 2–8 mM of cholesterol solution. The ChOx/DBS–PPY/ITO electrodes exhibit a response time of 30 s and are stable for ～3 months at 4 °C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3486–3491, 2001     

Review on smart home energy management

Presently, the increasing demand for the smart home system has necessitated a holistic approach to the problem and the need for a complete literature review. This paper discusses about the necessity for a smart home and developed an idea of the smart home energy management system with the literature review related to the energy management system scheduling, control, real-time automation, and communication.