Mössbauer study of the thermal decomposition of FeS2 in coal

The Mössbauer effect has been used to study the transformations of FeS₂ in four different coals: IL No. 6, Ky $\text{9}\text{14}$, Blacksville No. 2, and Powhatan No. 5. The transformations of FeS₂ in the coals were studied in an inert atmosphere. It was observed that the pyrrhotites formed from FeS₂ have a considerable reduction in the isomer shift at 440 °C as compared to the values obtained in the absence of coal. This effect is associated with the interaction of the pyrrhotites with the coal constituents at high temperatures. There is also a significant line-broadening at 440 °C. This broadening is due either to vacancy motion in the iron sulphides and/or to motional broadening due to particle motion in the coal-derived liquids. The percentage conversion of pyrite to pyrrhotite depends markedly on time as well as type of coal. The weathering of the coal has a detrimental effect on the rate of conversion of pyrite to pyrrhotite. The ferrous sulphate layers covering the pyrite particles hinder the removal of sulphur from that surface. The major factor affecting the $\text{Fe}\text{S}$ ratio is the total amount of sulphur available for H₂S formation. Partial H₂S pressure is the crucial quantity controlling the stoichiometry of the pyrrhotites. Hence, a high percentage of H₂S in the reactor at high temperature will assure the formation of pyrrhotites with a high number of metal vacancies.     

Moisture Distribution and Dewatering Efficiency for Wet Materials

This review paper summarizes current research efforts toward a comprehensive view of wet material dewatering, considering the binding energy as the strength to hold water, and rupture energy given to remove moisture from materials.     

Bi-objective optimization of the reliability-redundancy allocation problem for series-parallel system

The main objective of this paper is to solve the bi-objective reliability redundancy allocation problem for series-parallel system where reliability of the system and the corresponding designing cost are considered as two different objectives. In their formulation, reliability of each component is considered as a triangular fuzzy number. In order to solve the problem, developed fuzzy model is converted to a crisp model by using expected values of fuzzy numbers and taking into account the preference of decision maker regarding cost and reliability goals. Finally the obtained crisp optimization problem has been solved with particle swarm optimization (PSO) and compared their results with genetic algorithm (GA). Examples are shown to illustrate the method. Finally statistical simulation has been performed for supremacy the approach.     

Analysis of the diffusion layer thickness, equivalent circuit and conductance behaviour for reversible electron transfer processes in linear sweep voltammetry

The parametric dependence of the diffusion layer thickness upon electrode potential and scan rate has been derived for reversible electron transfer processes in linear sweep voltammetry (LSV) using a simple analytical expression for the dimensionless current function. The quantitative variation of the conductance with potential and scan rate has been illustrated and the equivalent circuit pertaining to LSV has been proposed. Several earlier results pertaining to potential step experiments, thin layer voltammetry, surface bound LSV, radial flow at micro-ring electrodes, etc. are shown to arise from the general expression for the current function obtained here, thus indicating an isomorphism among various potential perturbation techniques.     

Psychophysical basis for maximum pushing and pulling forces: A review and recommendations

The objective of this paper was to perform a comprehensive review of psychophysically determined maximum acceptable pushing and pulling forces. Factors affecting pushing and pulling forces are identified and discussed. Recent studies show a significant decrease (compared to previous studies) in maximum acceptable forces for males but not for females when pushing and pulling on a treadmill. A comparison of pushing and pulling forces measured using a high inertia cart with those measured on a treadmill shows that the pushing and pulling forces using high inertia cart are higher for males but are about the same for females. It is concluded that the recommendations of Snook and Ciriello (1991) for pushing and pulling forces are still valid and provide reasonable recommendations for ergonomics practitioners. Regression equations as a function of handle height, frequency of exertion and pushing/pulling distance are provided to estimate maximum initial and sustained forces for pushing and pulling acceptable to 75% male and female workers.     

Perceiving,learning, and exploiting object affordances for autonomous pile manipulation

Autonomous manipulation in unstructured environments will enable a large variety of exciting and important applications. Despite its promise, autonomous manipulation remains largely unsolved. Even the most rudimentary manipulation task—such as removing objects from a pile—remains challenging for robots. We identify three major challenges that must be addressed to enable autonomous manipulation: object segmentation, action selection, and motion generation. These challenges become more pronounced when unknown man-made or natural objects are cluttered together in a pile. We present a system capable of manipulating unknown objects in such an environment. Our robot is tasked with clearing a table by removing objects from a pile and placing them into a bin. To that end, we address the three aforementioned challenges. Our robot perceives the environment with an RGB-D sensor, segmenting the pile into object hypotheses using non-parametric surface models. Our system then computes the affordances of each object, and selects the best affordance and its associated action to execute. Finally, our robot instantiates the proper compliant motion primitive to safely execute the desired action. For efficient and reliable action selection, we developed a framework for supervised learning of manipulation expertise. To verify the performance of our system, we conducted dozens of trials and report on several hours of experiments involving more than 1,500 interactions. The results show that our learning-based approach for pile manipulation outperforms a common sense heuristic as well as a random strategy, and is on par with human action selection.     

Fish oil prevents change in arachidonic acid and cholesterol content in rat caused by dietary cholesterol

Rats were fed diets high in either saturated fat (beef tallow) or α-linolenic acid (linseed oil) or eicosapentaenoic and docosahexaenoic acids (fish oil) with or without 2% cholesterol supplementation. Consumption of linseed oil and fish oil diets for 28 days lowered arachidonic acid content of plasma, liver and heart phospholipids. Addition of 2% cholesterol to diets containing beef tallow or linseed oil lowered 20∶4ω6 levels but failed to reduce 20∶4ω6 levels when fed in combination with fish oil. Feeding ω3 fatty acids lowered plasma cholesterol levels. Addition of 2% cholesterol to the beef tallow or linseed oil diet increased plasma cholesterol concentrations but not when fish oil was fed. Feeding the fish oil diet reduced the cholesterol content of liver, whereas feeding the linseed oil diet did not. Dietary cholesterol supplementation elevated the cholesterol concentration in liver in the order: linseed oil > beef tallow > fish oil (8.6-, 5.5-, 2.6-fold, respectively). Feeding fish oil and cholesterol apparently reduced 20∶4ω6 levels in plasma and tissue lipids. Fish oil accentuates the 20∶4ω6 lowering effect of dietary cholesterol and appears to prevent accumulation of cholesterol in plasma and tissue lipids under a high dietary load of cholesterol.     

Reactive pozzolana from Indian clays—their use in cement mortars

Studies were undertaken to produce reactive pozzolana i.e. metakaolin from four kaolinitic clays collected from different sources in India. The metakaolin produced from these clays at 700-800 °C show lime reactivity in between 10.5 to 11.5 N/mm² which is equivalent to commercially available calcined clay Metacem-85. The microstructure of the metakaolin has been reported. The effect of addition of metakaolin up to 25% in the Portland cement mortars was investigated. An increase in compressive strength and decrease of porosity and pore diameter of cement mortars containing metakaolin (10%) was noted over the cement mortars without metakaolin. The hydration of metakaolin blended cement mortars was investigated by differential thermal analysis (DTA) and scanning electron microscopy (SEM). The major hydraulic products like C-S-H and C₄AH₁₃ have been identified. Durability of the cement mortars with and without metakaolin was examined in different sulphate solutions. Data show better strength achievement in cement mortars containing 10% MK than the OPC mortars alone.     

A semantic parsing approach for Bhutanese language of Dzongkha

Developments in the computational analysis of Dzongkha have been limited due to the syntactic complexity of the language. Though the natural language processing domains have witnessed rapid developments over the past decade; very few works has been done in Dzongkha despite of being the national language of Bhutan. In this paper, we have investigated the major problems in Dzongkha processing and have proposed a semantic parsing approach for effective processing of this language. We have used a probabilistic approach and have used the linguistic rules in Dzongkha to remove the ambiguities. Semantic representations along with belief net concepts have been used to increase the accuracy of segmentation, syntactic and semantic analyses. The proposed frame work has been able to solve the major issues related to Dzongkha processing, however needs to be further improved to include all the syntactic variations.