Effect of pH on the detailed chemical nature and metal-carbonate species in as synthesized zirconia alumina composites

Zirconia was deposition precipitated on γ-alumina in pH range 7-10 from zirconium oxy-nitrate and soda ash. Zirconium formed its hydroxycarbonate as deduced from ICP-EOS, CHN, and TGA-MS. Higher pH favored formation of carbonate species of zirconium over its hydroxide. TGA-MS indicated formation of three different types of carbonate species. FTIR results corroborated this. Monodentate metal carbonate was observed irrespective of pH of preparation. In addition, bridged bidentate species formed at pH ≤ 8 which changed to chelating bidentate at pH > 8. XRD indicated that all the samples formed tetragonal-zirconia upon calcination irrespective of pH of preparation. Higher pH resulted in smaller crystallites of t-ZrO₂. Changes in chemical moiety with pH reflected on acidity and the deactivation rate for 2-methyl-3-butyn-2-ol which decreased by two orders of magnitude in samples prepared at higher pH. Surface area and pore volume benefited from deposition precipitation. SEM-EDAX showed reasonable distribution of zirconia over γ-Al₂O₃.     

Single-phase and binary phase nanogranular ferrites for magnetic hyperthermia application

The study demonstrates the performance of heating efficiency in single-phase and binary phase spinel ferrite nanosystems. Ferrimagnetic cobalt ferrite (CoFe₂O₄) (CFO) and superparamagnetic copper ferrite/copper oxide (CuFe₂O₄/CuO) (CuF) nanosystems of different particle sizes were synthesized through a microwave-assisted coprecipitation method. The heating behavior was observed in range of both field amplitudes (8-24 kA/m at 516 kHz) and frequencies (325-973 kHz at 12 kA/m). The heating efficiency was analyzed and compared by means of particle size, magnetization, effective anisotropy constant, and Néel relaxation mechanism. Indeed, the heating rate was maximized in larger ferrite particles with low effective anisotropy constant. Moreover, though the magnetization and effective anisotropy constant of single-phase CoFe₂O₄ nanoparticles were higher, the binary phase CuFe₂O₄/CuO nanosystems of similar crystallite size (28 nm) exhibited superior heating efficiency (4.21°C/s). For a field amplitude and frequency of 24 kA/m and 516 kHz, the heating rate of CuF and CFO ferrites with different crystallite sizes decreased in the order of 4.21 > 2.14 > 0.58 > 0.52°C/s for 29 nm > 25 nm > 12 nm > 15 nm, respectively. The results emphasize that binary phase ferrite nanoparticles are better thermoseeds than the single-phase ferrites for the magnetic hyperthermia application.     

New Formulation of a Methylseleno-Aspirin Analog with Anticancer Activity Towards Colon Cancer

Aspirin (ASA) has attracted wide interest of numerous scientists worldwide thanks to its chemopreventive and chemotherapeutic effects, particularly in colorectal cancer (CRC). Incorporation of selenium (Se) atom into ASA has greatly increased their anti-tumoral efficacy in CRC compared with the organic counterparts without the Se functionality, such as the promising antitumoral methylseleno-ASA analog (1a). Nevertheless, the efficacy of compound 1a in cancer cells is compromised due to its poor solubility and volatile nature. Thus, 1a has been formulated with native α-, β- and γ-cyclodextrin (CD), a modified β-CD (hydroxypropyl β-CD, HP-β-CD) and Pluronic F127, all of them non-toxic, biodegradable and FDA approved. Water solubility of 1a is enhanced with β- and HP- β-CDs and Pluronic F127. Compound 1a forms inclusion complexes with the CDs and was incorporated in the hydrophobic core of the F127 micelles. Herein, we evaluated the cytotoxic potential of 1a, alone or formulated with β- and HP- β-CDs or Pluronic F127, against CRC cells. Remarkably, 1a formulations demonstrated more sustained antitumoral activity toward CRC cells. Hence, β-CD, HP-β-CD and Pluronic F127 might be excellent vehicles to improve pharmacological properties of organoselenium compounds with solubility issues and volatile nature.     

A Holistic Approach on Junctionless Dual Material Double Gate (DMDG) MOSFET with High k Gate Stack for Low Power Digital Applications

Silicon - The 2D analytical models for electrostatic potential, threshold voltage, subthreshold swing, Drain Induced Barrier Lowering (DIBL) and drain current of the Dual Material Double Gate...     

Review on smart home energy management

Presently, the increasing demand for the smart home system has necessitated a holistic approach to the problem and the need for a complete literature review. This paper discusses about the necessity for a smart home and developed an idea of the smart home energy management system with the literature review related to the energy management system scheduling, control, real-time automation, and communication.     

Evaporation of Ethanol-Water Mixture Drop on Horizontal Substrate

This study investigates the evaporation of sessile drop comprising ethanol and water mixture on horizontal poly methyl methacrylate surface. The contact angle (θ) and contact radius (R) of ethanol-water mixture drop are recorded with time, considering the impacts of presence of ethanol. With excess ethanol, the drop evaporation is principally controlled by a phase in which both the contact angle and contact radius are falling. A diffusional model assuming linear relation between contact radius and time is proposed as θ = eR ^?3 + cR ^?1, where e and c denote fitting coefficients. This model correlates with the experimental data.     

Immobilization of cholesterol oxidase and potassium ferricyanide on dodecylbenzene sulfonate ion‐doped polypyrrole film

Dodecylbenzene sulfonate (DBS)‐doped polypyrrole (PPY) conducting polymer films were electrochemically deposited onto the indium‐tin‐oxide (ITO)‐coated glass plates in aqueous medium. The enzyme cholesterol oxidase (ChOx) was immobilized on these DBS–PPY films by a physical adsorption technique. These ChOx‐immobilized DBS–PPY films were characterized by ultraviolet–visible and Fourier transform infrared spectroscopy. The enzyme activity studies indicate that ～40% of ChOx leaches out from the ChOx/DBS–PPY film. The ChOx activity in the ChOx/DBS–PPY film was assayed as a function of cholesterol concentration. The results of amperometric measurements conducted on ChOx/DBS–PPY/ITO film show linearity over the range 2–8 mM of cholesterol solution. The ChOx/DBS–PPY/ITO electrodes exhibit a response time of 30 s and are stable for ～3 months at 4 °C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3486–3491, 2001     

Recursive Technique For Computing System Reliability

This paper presents a simple recursive formula for calculating source-to-sink congestion, and hence reliability, in a network. This congestion is derived from individual blocking probabilities of each link. The method has an advantage of not requiring cut-sets. Such a knowledge is a prerequisite in most other methods of reliability analysis. We have programmed the algorithm using Pascal as it allows recursive procedure calls. An example illustrates the method.     

Modeling the drain current and its equation parameters for lightly doped symmetrical double-gate MOSFETs

A 2D model for the potential distribution in silicon film is derived for a symmetrical double gate MOSFET in weak inversion. This 2D potential distribution model is used to analytically derive an expression for the subthreshold slope and threshold voltage. A drain current model for lightly doped symmetrical DG MOSFETs is then presented by considering weak and strong inversion regions including short channel effects, series source to drain resistance and channel length modulation parameters. These derived models are compared with the simulation results of the SILVACO (Atlas) tool for different channel lengths and silicon film thicknesses. Lastly, the effect of the fixed oxide charge on the drain current model has been studied through simulation. It is observed that the obtained analytical models of symmetrical double gate MOSFETs are in good agreement with the simulated results for a channel length to silicon film thickness ratio greater than or equal to 2.