Leaching behavior of chromium in chrome shaving generated in tanning process and its stabilization

In this study, leaching properties and pollution potential of chromium in chrome shaving (CS), which is a solid residue of leather industry, containing 2.27% Cr were investigated and thermal stabilization procedure was applied to the CS for chromium immobilization. For this purpose, firstly, effects of the liquid/solid ratio, contact time, pH and sequential extraction on the leaching behavior of chromium in the CS were studied. It was determined that the CS-caused chromium pollution is a hazardous material for environment. Thermal stabilization procedure was applied to the CS in the temperature range of 250-500 degrees C for the chromium immobilization. Effective stabilization of chromium in the CS was achieved by heating of CS at 350 degrees C under CO(2) atmosphere. Leaching experiments were also carried out with the samples obtained from the stabilization process and the results compared with that of the CS. Also, TCLP test method was applied to the samples to determine pollution potentials and discharge situations of the CS and its stabilization products. While the chromium concentrations in the test solutions of all samples stabilized thermally at above 350 degrees C were below the USEPA regulatory limit of 5 mg/l, the concentration of chromium leached out from the CS was 30-fold bigger than the USEPA regulatory limit.     

Differential effects of pharmacological doses of melatonin on malondialdehyde and glutathione levels in young and old rats

BACKGROUND: The free radical theory of aging suggests the oxygen-derived species as the causative agents and free radical scavengers as the defense systems in aging process. The exact role of the free radical scavenging effects of melatonin in aging remains to be clarified. OBJECTIVE: In this experimental study, we investigated the age-related changes of malondialdehyde (MDA), a lipid peroxidation product, and glutathione (GSH) and the effects of exogenous melatonin. METHODS: Plasma, liver, and lung MDA and GSH levels of 9- and 28-month-old rats were measured. RESULTS: Plasma, lung, and liver MDA levels of old rats were significantly higher than those of the young ones (p = 0.024, p = 0.005, and p = 0.0007, respectively). However, while the lung GSH levels were found to be significantly decreased in the control group of old rats as compared with young ones (p = 0.005), the liver GSH levels were unchanged. Plasma MDA levels were found to be significantly lower in the melatonin group of old rats as compared with the control group (p = 0.020) but lung and liver MDA levels were not significantly different. There were no significant differences in the levels of measured parameters between both groups of young rats. CONCLUSION: Our results suggest that increased levels of lipid peroxidation products may have a role in aging, and exogenous melatonin may delay the aging process of tissues by means of its free radical scavenging effects.     

In vitro characterisation of probiotic properties of Enterococcus faecium and Enterococcus durans strains isolated from raw milk and traditional dairy products

In this study, some probiotic characteristics such as antimicrobial activity, vancomycin resistance, growth ability at pH, resistance to bile salts, bile salt deconjugation and hydrophobicity of 30 Enterococcus faecium and Enterococcus durans strains isolated and identified from raw milk and various dairy products were investigated. According to the study results, antimicrobial activity profiling, pH and bile salt resistance and bile salt deconjugation ability of Enterococcus strains varied depending on the species and strains and all the strains showed resistance to the tested bile salt concentrations. It was concluded that the E. faecium and E. durans strains tested showed probiotic characteristics and have the potential to be used in food production.     

Conductive polyaniline/poly(methyl methacrylate) films obtained by electropolymerization

Electrochemical polymerization of aniline, on a Pt foil electrode coated with poly(methyl methacrylate) (PMMA), produces a homogeneous, free-standing, flexible, and conductive polymer film. The conductivity of the films depends on the aniline content and reaches 0.1–0.2 S/cm for films having aniline content of 15% or more. The optimum thickness of precoated PMMA to obtain durable conducting films was found to be in the range of 10–15 μm. Cyclic voltammetric investigation revealed that aniline exhibits a similar electrochemical behavior on a PMMA coated platinum electrode similar to a bare Pt surface. The film gives a fast and reproducible response against ammonia gas within a concentration range of 1.0–0.01%. Scanning electron micrographs indicate that the films have a rough structure consisting of globular regions. © 1996 John Wiley & Sons, Inc.     

Technical demand response potentials of the integrated steelmaking site of Tata Steel in IJmuiden

Power generation from intermittent renewable energy sources in northwest Europe is expected to increase significantly in the next 20 years. This reduces the predictability of electricity generation and increases the need for flexibility in electricity demand. Data on demand response (DR) capacities of electricity-intensive consumers is limited for most countries. In this paper, we evaluate the DR potential that can be provided to the Dutch national grid by the integrated steelmaking site of Tata Steel in IJmuiden (TSIJ). TSIJ generates electricity from its works arising gases (WAGs). The DR potentials are evaluated by using a linear optimisation model that calculates the optimal allocation of WAGs of TSIJ in case of a call for DR by the transmission system operator. The optimisation is done subject to the technical constraints of the WAG distribution network, WAG storage capacities, the on-site demand for WAGs and the ramp-up rate of the power plant that runs on WAGs. Results show that TSIJ can supply 10 MW for two programme time units (equal to 15-min period in the Netherlands) of positive DR capacity (demand reduction) with an availability rate of 97%. This is not sufficient for participating in the current emergency capacity programs in the Netherlands, which require at least 20 MW for longer than one programme time unit. Tata Steel can provide 20 MW DR capacity with an availability rate of 65%. The negative DR capacity (demand increase) of Tata Steel in IJmuiden is found to be 20 MW supplied for three programme time units and four programme time units with doubling of blast furnace gas storage capacities.     

Ligand exchange based paraoxon imprınted QCM sensor

In the present work, a paraoxon imprinted QCM sensor has been developed for the determination of paraoxon based on the modification of paraoxon imprinted film onto a quartz crystal combining the advantages of high selectivity of the piezoelectric microgravimetry using MIP film technique and high sensitivity of QCM detection. The paraoxon selective memories have formed on QCM electrode surface by using a new metal–chelate interaction based on pre-organized monomer and the paraoxon recognition activity of these molecular memories was investigated. Molecular imprinted polymer (MIP) film for the detection of paraoxon was developed and the analytical performance of paraoxon imprinted sensor was studied. The molecular imprinted polymer were characterized by FTIR measurements. Paraoxon imprinted sensor was characterized with AFM and ellipsometer. The study also includes the measurement of binding interaction of paraoxon imprinted quartz crystal microbalance (QCM) sensor, selectivity experiments and analytical performance of QCM electrode. The detection limit and the affinity constant (K_affinity) were found to be 0.06 μM and 2.25 × 10⁴ M^? 1 for paraoxon [MAAP–Cu(II)–paraoxon] based thin film, respectively. Also, it has been observed that the selectivity of the prepared paraoxon imprinted sensor is high compared to a similar chemical structure which is parathion.     

Liquefaction/Solubilization of Low-Rank Turkish Coals by White-Rot Fungus (Phanerochaete chrysosporium)

Microbial coal liquefaction/solubilization of three low-rank Turkish coals (Bursa-Kestelek, Kütahya-Seyitömer and Mu?la-Yata?an lignite) was attempted by using a white-rot fungus (Phanerochaete chrysosporium DSM No. 6909); chemical compositions of the products were investigated. The lignite samples were oxidized by nitric acid under moderate conditions and then oxidized samples were placed on the agar medium of Phanerochaete chrysosporium. FTIR spectra of raw lignites, oxidized lignites and liquid products were recorded, and the acetone-soluble fractions of these samples were identified by GC-MS technique. Results show that the fungus affects the nitro and carboxyl/carbonyl groups in oxidized lignite sample, the liquid products obtained by microbial effects are the mixture of water-soluble compounds, and show limited organic solubility.