INFLUENCE OF HEAT TRANSFER IN THE SQUEEZING FLOW BETWEEN PARALLEL DISKS

This article addresses the squeezing flow and heat transfer between parallel disks when one disk is impermeable and the other is porous. Appropriate similarity transformations are invoked to convert the partial differential equations into ordinary ones. Expressions for velocity and temperature fields have been obtained by homotopy analysis method (HAM). The effects of embedding parameters such as squeeze number (S), Hartman number (M), Prandtl number (Pr), and Eckert number (Ec) are analyzed through graphs for the velocity and temperature profiles and tables for skin friction coefficient and local Nusselt number. It is observed that the series solutions are convergent only at third-order of approximation. The obtained results for velocity are also compared with the homotopy perturbation method (Domairry and Aziz, 2009).     

SYNERGISTIC EFFECTS OF ANIONIC SURFACTANT AND NONIONIC POLYMER ADDITIVES ON DRAG REDUCTION

Turbulent drag reduction (DR) behavior of mixed nonionic polymer and anionic surfactant solutions in water was studied in a pipeline set up to explore the synergic effects of mixed additives on DR. The concentration of polymer polyethylene oxide (PEO) was varied from 0 to 2000 ppm and the concentration of surfactant sodium dodecyl sulfate (SDS) was varied from 0 to 5000 ppm. The critical aggregation concentration (CAC), where the interaction between the polymer and the surfactant begins, and the polymer saturation point (PSP), where the polymer molecules become saturated with the surfactant, were determined using electrical conductivity and surface tension measurements. As the polymer concentration was increased the CAC decreased but the PSP increased. The relative viscosity showed a remarkable increase upon the addition of surfactant to the polymer solution due to extension of polymer chains caused by the formation of micelles on the backbone of the polymer molecules. The data exhibited a considerable increase in DR in the case of mixed polymer/surfactant systems. The percent reduction in friction factor was as high as 79 when 3000 ppm or more surfactant was added to the 500 ppm polymer solution. Furthermore, the drag reduction behavior of the polymer solution changed from so-called Type A to Type B. In Type A drag reduction, a transition from laminar to turbulent regime is observed with a clear-cut onset point. In Type B drag reduction, no transition or onset point is observed; the data fall on a gradual extension of the laminar line.     

OPTIMAL KINETIC PARAMETERS AND BATCH MODELING FOR PECTIN HYDROLYSIS TO GALACTURONIC ACID WITH PECTINEX ULTRA SP-L ENZYME

Galacturonic acid is a monosaccharide obtained by pectin hydrolysis and a suitable substrate to produce bioethanol by fermentation. This article focuses on quantification of citrus pectin hydrolysis to galacturonic acid and provides new, reliable kinetic parameters for the Michaelis-Menten equation when the well-known commercial Pectinex Ultra SP-L is employed as enzyme. They are: r _max  = 1.10 g/(L min), K _m  = 10.42 g/L, and K _IGA  = 10.05 g/L, as obtained with a great accuracy by a nonlinear regression method and confirmed by the three classical linearization procedures (Lineweaver-Burk, Langmuir, and Eadie-Hofstee). The quantification of product inhibition has been achieved, with its inclusion in the rate equation. A batch reactor model yields perfect agreement between predictions and experiments, even under conditions different from those on which the parameters had been determined by regression.     

Aliphatic polyurethane–montmorillonite nanocomposite coatings: Preparation,characterization, and anticorrosive properties

Polyurethane (PU)–clay nanocomposite coatings were prepared by a sonication method. The stability and morphology of these coatings was characterized by turbidometry, X‐ray diffraction, and transmission electron microscopy. The anticorrosive properties of these coatings were investigated by salt‐spray and electrochemical impedance spectroscopy methods. According to the results, dispersed nanoclay layers in the matrix of the nanocomposite coating compositions led to superior anticorrosive characteristics compared to those of pure PU coatings. The best results were obtained with coatings containing about 5 wt % clay. The resistance of the coating containing 5% clay was about 9.002 GΩ after 225 days of immersion in a 3.5 wt % NaCl solution, whereas it was only 97 kΩ for the pure PU coating. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of polymeric electrospun nanofibers for application in waterproof‐breathable fabrics

This study focuses waterproof‐breathable fabric development by applying electrospun web of polyurethane (PU), PAN, and PES directly onto the substrate fabric. Advantages of textile fabrics of elastomeric nanofibrous membranes over gortex specimen are the mass production feasibility, high elastomeric properties, more body comfort parameters, and fabric production without holes and needle traces formation. In this work, we identified the PU nanofibrous membrane as the best and useful web for application in waterproof‐breathable fabrics. Air permeability, water vapor transport rate, and resistance to water penetration average value for the prepared PU fibers web (sample of S1) were about 10 ml/s, 430 g/m²/24 h, 15 cm H₂O. To improve waterproof‐breathable characteristics of the membrane, the effects of electrospinning parameters on the fibers morphology and waterproof‐breathable characteristics were investigated. PU concentration of 12% (w/w) and electrospinning voltage of 12 kV were identified as optimal conditions to reach uniform and fine PU nanofibers formation without any beads. Air permeability, water vapor transport rate, and resistance to water penetration average value for the final sample were recorded as about 2.5 ml/s, 840 g/m²/24 h, and 44 cm H₂O, correspondingly. POLYM. ENG. SCI. 56:143–149, 2016. © 2015 Society of Plastics Engineers     

Effect of polyethylenimine addition and washing on stability and electrophoretic deposition of Co3O4 nanoparticles

In this work, the parameters of cobalt oxide suspension such as conductivity, zeta potential, particle size, stability, and finally the electrophoretic behavior of particles in the absence and presence of polyethylenimine (PEI) in acetone medium were investigated. Also, the effects of washing on the stability and electrophoretic deposition of Co₃O₄ were studied. Characterization of the obtained layer by optical microscopy revealed that there was no deposition in the suspension without PEI, while a uniform layer was formed in the presence of PEI additive. Scanning electron microscopy (SEM) results confirmed the uniformity of layer obtained in acetone using PEI additive. Moreover, SEM results demonstrated that more porous microstructures were obtained at longer deposition durations. The difference in the porosity of the layers, as indicated by the SEM micrographs, is attributed to increase in the deposition time.     

Wastewater treatment by adsorption with electrochemical regeneration using graphite-based adsorbents

An innovative technology for wastewater treatment using adsorption and electrochemical regeneration has been developed at the University of Manchester. The process uses a low capacity graphitic adsorbent material (a graphite intercalation compound, Nyex^TM 1000) which can be regenerated electrochemically. In this study, we investigate the characteristics of a new, partially porous adsorbent material, Nyex^TM 2000 which offers increased surface area in comparison with Nyex^TM 1000. Nyex^TM 2000 was found to have an adsorption capacity of almost three times that of Nyex^TM 1000. The electrical conductivity of a Nyex^TM 2000 was found to be double that of Nyex^TM 1000, enabling improvements in the electrochemical regeneration characteristics. The removal of an anionic azo dye, acid violet 17, from aqueous solution using Nyex^TM 1000 and 2000 was investigated under various operating conditions. The adsorption of acid violet 17 on Nyex^TM 2000 was found to be comparatively fast with 75 % of the equilibrium capacity being achieved within 5 min. The parameters affecting the regeneration efficiency including the charge passed, current density, treatment time, adsorbent bed thickness, and pH were investigated. An electrochemical regeneration efficiency of around 100 % was achieved for a fully loaded Nyex^TM 2000 in a sequential batch electrochemical cell with a regeneration time of 60 min and a charge passed of 100 C g⁻¹ at a current density of 14 mA cm⁻². The charge required for electrochemical regeneration was found to be approximately equal to theoretical charge required for complete oxidation of the adsorbed acid violet 17, making process design relatively simple. Nyex^TM 2000 was found to be an economic adsorbent with relatively small electrical energy consumption required (31 J mg⁻¹ of acid violet 17 treated, compared to 52 J mg⁻¹ of acid violet 17 for Nyex^TM 1000). Multiple adsorption/regeneration cycles presented no loss in adsorptive capacity and material loses over five adsorption/regeneration cycles.     

Lipid Class and Fatty Acid Composition of Psoralia corylifolia Seed

The purified crude lipid of Psoralia corylifolia seeds was subjected to lipid class and fatty acid analysis by thin layer and gas chromatography. The lipid classes identified were triacyl glycerol, free fatty acid, diacyl glycerol, mono acyl glycerol, hydrocarbon-waxester and polar lipid fractions. Most of the fractions were found to contain high level of C_18:1 while C_18:0, C_18:3 and C_20:0 were also found to be present in all the lipid fractions. It has been observed that the diacyl and monoacyl glycerol fractions contain significant amounts of C_14:0 and C_18:0 while the hydrocarbon-waxester fraction was rich in C_22:0. The polar lipids contain high level of C_18:3 and low level of C_18:1 as compared to other lipid fractions. The fatty acid composition of the whole oil was also determined and found to be similar to other fractions. Unidentified long chain fatty acids were also present in significant amounts in all the lipid fractions.     

Influence of the Ethylene Glycol, Water Treatment and Microwave Irradiation on the Characteristics and Performance of VPO Catalysts for n-Butane Oxidation to Maleic Anhydride

In this paper, the preparation of vanadium phosphate catalysts was shown to be improved by (1) using V₂O₅ and ethylene glycol as starting and reducing agent material, respectively for VOPO₄ · 2H₂O, (2) subsequent water treatment and (3) microwave irradiation. In particular, the preparation route, based on the reduction of VOPO₄ · 2H₂O with various alcohols, is described in detail and contrasted with other three established methods performed by using ethylene glycol and isobutyl alcohol as reductant and solvent for V₂O₅ or distilled water as a solvent material. The preparation of catalyst precursor is carried out by two different methods, namely conventional heating and microwave irradiation. With this new technique, catalysts derived from the reduction of VOPO₄ · 2H₂O by ethylene glycol exhibit substantially higher surface area (typically >40 m² g^?1) and activity. In fact, the surface area of the catalyst is significantly enhanced when the precursor is refluxed by distilled water and dried by microwave heating. The characterization of catalysts was carried out using X-ray diffraction (XRD), Brunauer–Emmer–Teller (BET) surface area measurement, temperature programmed reduction (H₂-TPR), temperature-programmed reaction (TPRn) and scanning electron microscopy (SEM). This study shows that employing ethylene glycol as reducing agent, followed by adding the water treatment step to catalyst synthesis procedure, and using microwave irradiation would give rise to enhanced surface area, activity and selectivity of the catalyst. Moreover, it introduces a more energy efficient procedure for preparation of vanadium phosphate catalyst used in selective oxidation of n-butane process.     

Development of High Strength and Toughness Non-Heated Al–Mg–Si Alloys for High-Pressure Die-Casting

Based on the 3 factors and 3 levels orthogonal experiment method, compositional effects of Mg, Si, and Ti addition on the microstructures, tensile properties, and fracture behaviors of the high-pressure die-casting Al-x Mg-y Si-z Ti alloys have been investigated. The analysis of variance shows that both Mg and Si apparently infl uence the tensile properties of the alloys, while Ti does not. The tensile mechanical properties are comprehensively infl uenced by the amount of eutectic phase(α-Al + Mg_2Si), the average grain size, and the content of Mg dissolved into α-Al matrix. The optimized alloy is Al-7.49 Mg-3.08 Si-0.01 Ti(wt%), which exhibits tensile yield strength of 219 MPa, ultimate tensile strength of 401 MPa, and elongation of 10.5%. Furthermore, contour maps, showing the relationship among compositions, microstructure characteristics, and the tensile properties are constructed, which provide guidelines for developing high strength and toughness Al–Mg–Si–Ti alloys for high-pressure die-casting.