Stearic Acid Modified Stearyl Alcohol Oleogel: Analysis of the Thermal,Mechanical and Drug Release Properties

The present study delineates the effect of stearic acid on the properties of stearyl alcohol oleogel. Herein, a series of oleogels were prepared by mixing different proportions of fatty alcohol (Stearyl alcohol; gelator) and fatty acid (stearic acid; co‐gelator). The characterization of the oleogels was done by thermal, macro‐scale stress relaxation, drug release, and antimicrobial studies. The oleogels were formed by the self‐assembly of stearyl alcohol/stearic acid. Thermal studies indicated that the stearic acid alters the crystal morphology, polymorphic transition and rate of crystallization of stearyl alcohol. The firmness of the oleogels with higher stearic proportion was better, which was due to the formation of a rigid network structure of stearyl alcohol in the presence of stearic acid. The release of ciprofloxacin hydrochloride, model drug, from the oleogels was better from the oleogels with higher stearic acid content. The release of the drug from the oleogels was Fickian diffusion‐mediated; except the oleogel with the highest stearic acid proportion. The antimicrobial study showed that the drug loaded oleogels were able to resist the growth of Escherichia coli, model microbe.     

Influence of organically modified nanoclay on the performance of pineapple leaf fiber‐reinforced polypropylene nanocomposites

Polypropylene/Pine apple leaf fiber (PP/PALF)‐reinforced nanocomposites were fabricated using melt blending technique in a twin‐screw extruder (Haake Rheocord 9000). Variation in mechanical properties, crystallization behavior, water absorption, and thermal stability with the addition of nanoclay in PP/PALF composites were investigated. It was observed that the tensile, flexural, and impact properties of PP increase with the increase in fiber loading from 10 to 30 wt %. Composites prepared using 30 wt % PALF and 5 wt % MA‐g‐PP exhibited optimum mechanical performance with an increase in tensile strength to 31%, flexural strength to 45% when compared with virgin PP. Addition of nanoclay results in a further increase in tensile and flexural strength of PP/PALF composites to 20 and 24.3%, which shows intercalated morphology. However, addition of nanoclay does not show any substantial increase in impact strength when compared with PP/PALF composites. Dynamic mechanical analysis tests revealed an increase in storage modulus (E′) and damping factor (tan δ), confirming a strong influence between the fiber/nanoclay and MA‐g‐PP. Differential scanning calorimetry, thermogravimetric analysis thermograms also showed improved thermal properties when compared with the virgin matrix. TEM micrographs also showed few layers of agglomerated clay galleries along with mixed nanomorphology in the nanocomposites. Wide angle X‐ray diffraction studies indicated an increase in d‐spacing from 22.4 Å in Cloisite 20A to 40.1 Å in PP/PALF nanocomposite because of improved intercalated morphology. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Acrylonitrile‐butadiene‐styrene nanocomposites filled with nanosized alumina

A polymer nanocomposite was produced by acrylonitrile‐butadiene‐styrene (ABS) and α‐alumina was prepared through sol‐gel process using aluminum nitrate and citric acid. The particle size was analyzed by X‐ray diffraction and scanning electron microscopy (SEM) studies. The nanocomposites were characterized through tensile strength, Young's modulus, strain% at break, flexural strength, flexural modulus, and impact strength. The ABS/Al₂O₃ nanocomposites are found to have slightly higher Young's modulus, but lower tensile strength, strain% at break, flexural and impact strength than the virgin ABS. But its flexural modulus increases with increasing Al₂O₃ content in ABS matrix. The d‐spacing was calculated in nanocomposites to evaluate the interaction between Al₂O₃ and ABS. The particle distributions in nanocomposites were studied by SEM. The fractured surfaces of tensile test samples were also examined through SEM and show that the ductile fracture of ABS is converted to brittle fracture with addition of Al₂O₃. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Modeling of key reaction pathways: Zeolite catalyzed alkylation processes

A six lump kinetic model that considers the key reactions for the zeolite catalyzed alkylation process is presented. The influence of different reactions and rate limiting steps on reactor performance is examined by coupling an appropriate reactor model that accounts for different back-mixing on reactor scale, with a zeolite particle model which accounts for the diffusion inside the zeolite pore, the alkylation reaction, and zeolite deactivation. Model predictions are compared with experimental results and lead to conclusions that hydride transfer and oligomerization reactions are the key kinetic steps affecting the overall performance of zeolite catalyzed alkylation processes. It is suggested that higher alkylate yield and longer zeolite activity are achieved by increasing the intrinsic hydride transfer rate and the ratio of feed isobutane to n-butene (P/O) concentration. For a given P/O feed ratio, achieving close to plug flow for isobutane and high back-mixing for n-butene further enhances local P/O ratio and yield. Furthermore, optimal zeolite catalyst design should consider the egg shell type of Brønsted acid site distribution and a lower silicon to alumina (Si/Al) ratio.     

Retracted: Mechanical and thermal properties enhancement of polycarbonate nanocomposites prepared by melt compounding

The following article from the Journal of Applied Polymer Science, “Mechanical and thermal properties enhancement of polycarbonate nanocomposites prepared by melt compounding” by Sanjay K. Nayak, Smita Mohanty, and Sushanta K. Samal, published online on 7 April 2010 in Wiley Online Library (J. Appl. Polym. Sci. 2010 , 117, 2101; http://onlinelibrary.wiley.com/doi/10.1002/app.31222/full ), has been retracted by agreement between the authors, the journal's editors, and Wiley Periodicals, Inc. The retraction has been agreed due to significant overlap with respect to another article, “Effect of hydrogen bonding on the rheology of polycarbonate/organoclay nanocomposites,” by Kyung Min Lee, and Chang Dae Han, published online on 19 June 2003 in Polymer ( 2003 , 44, 4573).     

Generalized hybrid control synthesis for affine systems using sequential adaptive networks

BACKGROUND: A generalized methodology for the synthesis of a hybrid controller for affine systems using sequential adaptive networks (SAN) is presented. SAN consists of an assembly of neural networks that are ordered in a chronological sequence, with one network assigned to each sampling interval. Using a suitable process model based on oxygen metabolism and an a priori objective function, a hybrid control law is derived that can use online measurements and the states predicted by SAN for computing the desired control action. RESULTS: The performance of the SAN–hybrid controller is tested for simulated fed‐batch production of methionine for three different process conditions. Simulations assume that online measurements of dissolved oxygen (DO) concentration are available. The performance of the SAN–hybrid controller gave an NRMSE of ～10^?4 in the absence of noise, ～10^?3 and ～10^?2 for ± 5% and ± 10% noise in the DO measurement and ～10^?2 for parameter uncertainty when compared with the ideal model prediction. CONCLUSIONS: The observed performance for unmeasured state prediction and control implementation shows that the proposed SAN–hybrid controller can efficiently compute the manipulated variable required to maintain methionine production along the optimized trajectory for different conditions. The test results show that the SAN–hybrid controller can be used for online real‐time implementation in fed‐batch bioprocesses. Copyright © 2009 Society of Chemical Industry     

Aluminium extraction and leaching characteristics of Talcher Thermal Power Station fly ash with sulphuric acid

Although fly ash disposal is of environmental concern the quality of residues can be improved with respect to high value applications. Fly ash is considered as a potential source of aluminium and other strategic metals. Leaching and metal extraction behaviour of fly ash collected from Talcher Thermal Power Station have been thoroughly studied using sulphuric acid as extractant. The chemical and mineralogical composition of post-leached samples have been determined. Aluminium extraction by direct leaching at low acid concentration and ambient temperature is not suitable for high recovery. The extraction efficiency of aluminium increases significantly at a higher solid:liquid ratio. It is evident that the leachability of metals from fly ash depends on the nature of leaching medium, solid:liquid ratio, temperature and leaching time.     

Effect of silane treated fly ash on physico-mechanical,morphological, and thermal properties of recycled poly(vinyl chloride) composites

The silane treatment on properties of fly ash (FA) and development of its composite using recycled poly(vinyl chloride) (r-PVC) material retrieve from waste wires and cable insulation are investigated in this work. The use of (3-aminopropyl)triethoxysilane was employed as a coupling agent with some other essential additives. The composites sheet was prepared by means of the melt mixing process and go along with the compression molding process. The superior properties on compatibility between silane-modified FA (FA(Si)) and r-PVC were successfully studied using rheological, thermomechanical, morphological, and water absorption analysis. Primary analysis of r-PVC and FA was employed using Fourier transform infrared spectroscopy analysis. The thermal stability of composites was stable up to 187°C. In addition, significant enhancement on tensile strength as well as young's modulus of composite as compared to untreated r-PVC/FA composites. Morphological properties of silane treated FA based composites presented the good distribution and excellent uniformity with higher wettability of FA particles within r-PVC matrix. The water absorption test showed decrease in water absorption with increase silane treatment concentration FA in the r-PVC matrix. It was remarkable to note that silane treated FA can be prepared as a composite using r-PVC matrix with further modified properties.     

Calculation of ionization potential of amorphous organic thin-films using solvation model and DFT

Density functional theory and polarizable continuum model are used to calculate ionization potential of thin-films of 12 organic molecules. Computed values are compared with experimental values obtained from ultraviolet photoemission spectroscopy. The excellent correlation shows that it is possible to determine the ionization potential of organic molecules in solid-state within ±0.15 eV of the experimental value. This method is useful for chemists in designing molecules for organic electronics.     

The interaction between lid diameter,height and shape on wrist torque exertion in younger and older adults

The following study investigated wrist torque strength measurements of a group of younger and older adults. The aim of the study was to examine the impact of shape, diameter and height of lid on wrist torque opening strength. Forty participants took part in the study in four groups, younger males and females and older males and females. Data were collected for 12 test pieces. Anthropometric data were also obtained for stature, weight, hand breadth, hand length, chuck grip force, grip force, lateral grip force and pinch grip force. The analysis of the wrist torque strength measurements found that participants could exert greater force with square test pieces compared to circular test pieces of the same diameter. Examination of the circular test pieces found that as diameter and height increased, so did torque exertion data for the test pieces between 20 mm and 50 mm diameter. The surface area of the test pieces was found to be highly correlated with the level of torque exertion, thus a linear model was developed to describe this relationship. The model could be used to predict maximal torque closure levels for use in the packaging industry. The anthropometric data revealed that as height, weight, hand length and hand breadth increased, there was a correlation with the levels of torque exerted. Future research needs to further examine the relationship between surface area and torque exerted and the design of spherical lids to increase the contact area between the hand and the lid.