Synthesis,characterization and ion exchange properties of zirconium(IV) tungstoiodophosphate,a new cation exchanger

Zirconium(IV) tungstoiodophosphate has been synthesized under a variety of conditions. The most chemically and thermally stable sample is prepared by adding a mixture of aqueous solutions of 0·5 mol L⁻¹ sodium tungstate, potassium iodate and 1 mol L⁻¹ orthophosphoric acid to aqueous solution of 0·1 mol L⁻¹ zirconium(IV) oxychloride. Its ion exchange capacity for Na⁺ and K⁺ was found to be 2·20 and 2·35 meq g⁻¹ dry exchanger, respectively. The material has been characterized on the basis of chemical composition, pH titration, Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis. The effect on the exchange capacity of drying the exchanger at different temperatures has been studied. The analytical importance of the material has been established by quantitative separation of Pb²⁺ from other metal ions.     

Dielectric and thermal characteristics of gel grown single crystals of ytterbium tartrate trihydrate

Dielectric and thermal characteristics of gel grown single crystals of ytterbium tartrate trihydrate have been carried out. The dielectric constant has been measured as a function of frequency in the range 2 kHz–1 MHz and temperature range 30–300 °C. The dielectric constant increases with temperature, attains a peak near 215 °C, and then decreases as the temperature exceeds 215 °C. The dielectric anomaly at 215 °C is suggested to be due to phase transition brought about in the material. The dielectric behaviour of the material is correlated with the results on thermal analysis. Thermogravimetric and differential thermal analysis have been used to study the thermal characteristics of the material. The experimental results show that the material is thermally stable up to 200 °C. The decomposition process occurs in two stages until ytterbium oxide is formed at 700 °C. The non-isothermal kinetic parameters e.g., activation energy and the frequency factor have been evaluated for each stage of thermal decomposition by using the integral method, applying the Coats–Redfern approximation.     

清涧河流域不同水土保持措施配置下蓄水拦沙效益分析

从分析清涧河流域不同年代水土保持措施配置人手，以蓄水拦沙效益为研究目标，探讨了水土保持措施优化配置问题。分析认为：水土保持措施配置与蓄水拦沙效益是密切相关的，淤地坝在水土保持措施配置中应占有合理比重，坡面治理措施配置中需进一步加大封禁治理比例。     

Microwave-Assisted Graphite-Support Synthesis of Imidazolones

5(4H)-Oxazolones react with ammonium acetate under microwave irradiation and using graphite as support in an eco-friendly process. The reaction was carried out under solvent-free conditions and the imidazolones were obtained quantitatively. Moreover the reaction time was reduced too.     

Thermal analysis of the architecture of old and new houses at Ghadames

The study suggests improvements in the design of new houses to conserve energy and enhance indoor thermal comfort. Summer temperature records show that a new house has an average indoor temperature of 35°C with the ambient average 31°C. The traditional house in the old city recorded 28°C for the same period. Winter temperatures in both types of houses were similar (12°C) when not occupied. Architectural features of the two houses were compared to identify those responsible for difference in the thermal performance. Larger exposed surface and window areas, higher overall heat transfer coefficient and weaker thermal coupling with the ground for the new houses seems to contribute to their inferior thermal performance.     

有环境约束时完成一族跟踪任务的力控制

本文为工业机器人提出了一种极点配置控制法，这种控制方法的优点有：一是它的积分作用消除了机器人的微小扰动和稳态误差；二是能任意设置系统的极点，因此能保证闭环系统的稳定性和规定状态变量的暂态响应；三是加入了加速度反馈，抑制了由电枢电感所引起的机械手的振动，最后，给出了ＰＵＭＡ５６２机器人的计算机仿真和实验结果验证了此控制法的有效性。     

Measurements of Stress Intensity Factors of an Interface Crack Under Mixed Mode Loading

The optical method of caustics has been utilised to measure both the stress intensity factor for a crack lying along the interface of an aluminium/epoxy bimaterial specimen, and the mode mixity arising from the difference in the elastic properties across the interface. Measurements were carried out by using a novel modification to the method whereby caustics are produced and measured from both sides of the specimen, so compensating automatically for the distortion induced in the specimen due to misaligned loading fixtures. A flat reflective surface across the interface was obtained by adhering a reflective coating to the specimen. Verification that this coating does not affect measurement accuracy was obtained by comparing stress intensity factors measured from coated and uncoated monolithic aluminium specimens where good agreement was found to exist between both measurements.     

Effect of short-term storage on phenolic content,o-diphenolase and peroxidase activities of cut yam tubers (Dioscorea sp)

The effect of short-term storage on the protein, phosphorus and phenolic content as well as peroxidase and o-diphenolase activities of cut, harvested Jamaican yam (Dioscorea sp) tubers (D rotundata. D alata and D cayenensis) was studied. There was an initial increase in the total phenolic content up to the third week of storage followed by a gradual decrease to the sixth week. Phenolic content was found to be highest in D cayenensis followed by D rotundata and D alata. The activities of peroxidase (EC 1. 11. 1. 7) and o-diphenolase (EC 1. 10.3.1) increased steadily up to the third week of storage and thereafter decreased to the fifth week. The intensity and rapidity of browning in tubers when cut, correlated very closely with the tuber o-diphenolase and phenolic content levels while the onset of rotting correlated with the peroxidase activity levels in the species studied.