Study of oil uptake and some quality attributes of potato chips affected by hydrocolloids

The use of coating agents is one effective way to reduce oil absorption in fried products. Reducing the fat content of fried foods by application of coatings is an alternative solution to comply with both health concerns and consumer preferences. The aim of this study was to analyze the effect of hydrocolloids as coating agent on the quantity of oil uptake and on sensory attributes of potato chips. The effect of the coating composition showed that the minimum fat content was related to 1% carboxymethyl cellulose (CMC), 0.5% xanthan, 0.3% guar and 1% xanthan with 21.2, 21.7, 22.4 and 24.8%, respectively, and the highest of fat content was related to blank sample (non-coated), 2% tragacanth, 0.5% guar gum with 49.4, 41.7 and 33.2% of oil content, respectively (p <0.05). The most effective coating agent reduced the oil uptake by 57.03, 55.94, 54.67 and 49.71%, respectively (p <0.05). Sensory evaluation showed that the best color was related to 1% CMC, 0.3% guar and 2% tragacanth, and with respect to flavor evaluation the best flavor was observed in tragacanth 2%, CMC 0.5% and CMC 0.1%, and the best texture referred to tragacanth 2%, CMC 0.5% and CMC 1%. In sensory evaluation, all coated chips got high scores compared with blank (non-coated chips) samples (p <0.05).     

Introduction of an empirical classification system for evaluating tunneling impact on the discharge of springs (TIS) in the surrounding areas

Bulletin of Engineering Geology and the Environment - Water inflow caused by tunneling can have severe impacts on the springs’ discharge rate. If these impacts have not been predicted...     

Synthesis of nanoporous Baghdadite by a modified sol-gel method and its structural and controlled release properties

In this research, a bimodal nanoporous Baghdadite (NB) (Ca3ZrSi2O9) was prepared by a modified sol-gel method using P123 as a surfactant. The effects of P123's contents on the structural and textural properties as well as the drug delivery behavior of NB were assessed in vitro. The usage of P123 offered a new route for the synthesis of NB. The synthesized NB samples with different amounts of P123 were studied through X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), N2 adsorption-desorption, field emission scanning electron microscopy (FESEM) equipped with energy-dispersive X-ray analysis spectroscopy (EDAX) and transmission electron microscopy (TEM). The results showed that a single-phase Baghdadite was obtained by this new method at the calcination temperature of 800?°C. It was found that an increase in P123's content up to 0.025?mol changed the morphology of NB samples from mountain-like to needle-like. The potential application of NB samples as drug delivery agents was assessed by estimating their release properties up to 240?h. This research revealed that the synthesized Baghdadite could be used as a potential nanoporous carrier with controlled release capability in bone tissue regeneration.     

Multiobjective invasive weed optimization: Application to analysis of Pareto improvement models in electricity markets

This paper presents a proposal for multiobjective Invasive Weed Optimization (IWO) based on nondominated sorting of the solutions. IWO is an ecologically inspired stochastic optimization algorithm which has shown successful results for global optimization. In the present work, performance of the proposed nondominated sorting IWO (NSIWO) algorithm is evaluated through a number of well-known benchmarks for multiobjective optimization. The simulation results of the test problems show that this algorithm is comparable with other multiobjective evolutionary algorithms and is also capable of finding better spread of solutions in some cases. Next, the proposed algorithm is employed to study the Pareto improvement model in two complex electricity markets. First, the Pareto improvement solution set is obtained for a three-player oligopolistic electricity market with a nonlinear demand function. Then, the IEEE 30-bus power system with transmission constraints is considered, and the Pareto improvement solutions are found for the model with deterministic cost functions. In addition, NSIWO algorithm is used to analyze this system with stochastic cost data in a risk management problem which maximizes the expected total profit but minimizes the profit risk in the market.     

Fast nonlinear risk assessment for autonomous vehicles using learned conditional probabilistic models of agent futures

Autonomous Robots - This paper presents fast non-sampling based methods to assess the risk for trajectories of autonomous vehicles when probabilistic predictions of other agents’ futures are...     

Synergistic effect of micro- and nano-TiO2 on hydrophobic,mechanical, and electrical properties of hybrid polyurethane composites

Journal of Materials Science: Materials in Electronics - One of the ways to improve the performance of ceramic insulators in polluted climates is to use polymer coatings reinforced with ceramic...     

Effect of hexagonal structure nanoparticles on the morphological performance of the ceramic scaffold using analytical oscillation response

Porous bony scaffolds are utilized to manage the growth and migration of cells from adjacent tissues to a defective position. In the current investigation, the effect of titanium oxide (TiO₂) nanoparticles on mechanical and physical properties of porous bony implants made of polymeric polycaprolactone (PCL) is studied. The bio-nanocomposite scaffolds are prepared with composition of nanocrystalline hydroxyapatite (HA) and TiO₂ powder using the freeze-drying technique for different weight fractions of TiO₂ (0 wt%, 5 wt%, 10 wt%, and 15 wt%). In order to identify the microstructure and morphology of the fabricated porous bio-nanocomposites, the X-ray diffraction (XRD), atomic force microscope (AFM) and scanning electron microscopy (SEM) are employed. Also, the biocompatibility and biodegradability of the manufactured scaffolds are examined by placing them in a simulated body fluid (SBF) for 21 days, their weight and pH changes are measured. The rate of degradation of the PCL-HA scaffold can be controlled by varying the percentage of its constituent components. Due to an increasing growth and activity of bone cells and the apatite formation on the free surface of the fabricated bio-nanocomposite implants as well as their reasonable mechanical properties, they have the potential to be used as a bone substitute. Additionally, with the aid of the experimentally extracted mechanical properties of the scaffolds, the vibrational characteristics of a beam-type implant made of the proposed porous bio-nanocomposites are explored. The results obtained from SEM image indicate that the scaffolds produced by the employed method have high total porosity (70%–85%) and effective porosity. The pore size is obtained between 60 and 200 μm, which is desirable for the growth and propagation of bone cells. Also, it is revealed that the addition of TiO₂ nanoparticles leads to reduce the rate of dissolution of the fabricated bio-nanocomposite scaffolds.     

Supplementing with L-Tryptophan Increases Medium Protein and Alters Expression of Genes and Proteins Involved in Milk Protein Synthesis and Energy Metabolism in Bovine Mammary Cells

The objective of this study was to investigate the effects of supplementing with L-tryptophan (L-Trp) on milk protein synthesis using an immortalized bovine mammary epithelial (MAC-T) cell line. Cells were treated with 0, 0.3, 0.6, 0.9, 1.2, and 1.5 mM of supplemental L-Trp, and the most efficient time for protein synthesis was determined by measuring cell, medium, and total protein at 0, 24, 48, 72, and 96 h. Time and dose tests showed that the 48 h incubation time and a 0.9 mM dose of L-Trp were the optimal values. The mechanism of milk protein synthesis was elucidated through proteomic analysis to identify the metabolic pathway involved. When L-Trp was supplemented, extracellular protein (medium protein) reached its peak at 48 h, whereas intracellular cell protein reached its peak at 96 h with all L-Trp doses. β-casein mRNA gene expression and genes related to milk protein synthesis, such as mammalian target of rapamycin (mTOR) and ribosomal protein 6 (RPS6) genes, were also stimulated (p < 0.05). Overall, there were 51 upregulated and 59 downregulated proteins, many of which are involved in protein synthesis. The results of protein pathway analysis showed that L-Trp stimulated glycolysis, the pentose phosphate pathway, and ATP synthesis, which are pathways involved in energy metabolism. Together, these results demonstrate that L-Trp supplementation, particularly at 0.9 mM, is an effective stimulus in β-casein synthesis by stimulating genes, proteins, and pathways related to protein and energy metabolism.     

In situ Measurement of the Adhesion Strength and Effective Elastic Stiffness of Single Soft Micropillar

We report the deformation behavior and mechanical properties of a polymeric micropillar, which measures approximately 10 μm by 30 μm in size by measuring the loading/unloading response using an in situ force measurement system. When the single poly(dimethylsiloxane) (PDMS) micropillar was subjected to compression, we observed a periodic wrinkle and global (Euler) buckling at the sidewall. During unloading, we found the pull-off force (adhesion force) to increase for higher values of preloading and also for lower loading/unloading rates. From the slope of the load–displacement curves measured in situ, we calculated the effective elastic stiffness of the PDMS micropillar to be about 2.03 MPa. In addition to the current work, we report that this method can be used more broadly for in situ measurement of the intrinsic mechanical and adhesion properties of polymers and other relatively soft materials.     

Application of the Direct Strength Method to local buckling resistance of thin-walled steel members with non-uniform elevated temperatures under axial compression

This paper assesses the applicability of the Direct Strength Method (DSM) to calculating the local buckling ultimate strength of cold-formed thin-walled (CF-TW) steel members with non-uniform elevated temperature distributions in the cross-section. The assessment was carried out by checking the DSM calculation results with numerical simulation results using the general finite element software ABAQUS which was validated against ambient and uniform elevated temperature tests on short lipped channel sections. The validated numerical model was used to generate an extensive database (372 models) of numerical results of load carry capacity of CF-TW members with different uniform and non-uniform temperature distributions in the cross-sections, under different boundary and loading conditions and with different dimensions and lengths. It was concluded that the DSM local buckling curve was directly applicable for columns with uniform temperature distributions in the cross-section. For columns with non-uniform temperature distributions, a modification to the local buckling curve was necessary and this paper has proposed a new curve.