热分析在PVA纤维预处理中的应用

用差热、热重法对原丝的热性能及由不同预处理方法所引起的PVA纤维的热行为变化进行了研究;并通过模拟脱水条件,用不同升温速率,求出了经不同预处理纤维的脱水反应活化能。结果表明,PVA原丝在230℃有一软化点,三种预处理都不同程度地影响了原丝的热效应变化;纤维在180～340℃主要为脱水反应;原丝及经脱水剂、O_3和O_3综合脱水剂处理的纤维,其脱水反应的表观活化能分别为:164.3kJ/mol,92.9kJ/mol,130.5kJ/mol和117.6kJ/mol。     

Effect of load ratio on the deformation behaviour of fatigue crack tips

To investigate the change in the manner of plastic deformation at a fatigue crack tip under different loading conditions, the fresh surface area which is produced in one fatigue cycle at the crack tip was measured by an electrochemical method under various load ratios. The fresh surface area produced in each fatigue cycle is in proportion to the crack propagation rate in the Paris regime. This indicates that the crack tip geometry at K_max maintains a similar profile through the Paris regime. Furthermore, the fresh surface area is independent of load ratio at a given da/dN in the Paris regime. This suggests that the shape of the fatigue crack tip at K_max should be independent of load ratio at a given da/dN, and that the shape at K_min is also independent of load ratio, whereas the size of the deformed region at the crack tip is in proportion to da/dN.     

Zeolite coated interdigital capacitors as a new type of gas sensor

The adsorption of a gas influences the dielectric constant of zeolites. This property is used as the sensitive component of a gas sensor.

Planar interdigital capacitors were coated with thin films of zeolites. When gas molecules are adsorbed, the dielectric constant of the zeolite is altered, which causes a change in the capacitance of the interdigital capacitor. This change is strongly dependent on the concentration of adsorbate in the gas phase.     

对光学瓦斯检定器干涉条纹的探讨

本文从对光学瓦斯检定器干涉系统两相干光光程差产生原因的分析，探讨其干涉条纹的成因和干涉类型。     

端基封闭法合成双环戊二烯改性不饱和聚酯

研究端基封闭法合成双环戊二烯（ＤＣＰＤ）改性不饱和聚能工艺条件对产品性能的影响。研究结果表明，合成反应的最佳工艺条件为总酸酐：丙二醇：ＤＣＰＤ＝１：１．１：０．１─０．１６；封端反应温度１３０─１４０℃催化剂量为总重量的０．０２％─０．０３％；聚酯酸值５０ｍｇｋＯＨ·ｇ￣（－１）时滴加ＤＣＰＤ，滴加时间控制在１─２小时；加成反应时间为２小时左右。     

Vandermonde and resultant matrices: An abstract approach

Vandermonde and resultant matrices: An abstract approach     

Contributing authors

Contributing authors     

Measurement of aerosol particles by dynamic light scattering-I. effects of non-Gaussian concentration fluctuation in real time photon correlation spectroscopy

Effects of non-Gaussian concentration fluctuations in real time photon correlation spectroscopy were investigated with several sizes of mono-disperse polystyrene latex particles. The non-Gaussian correlation model for a full or a quasi-full (scaled) correlator showed good performance for particle sizing in the case of scaled correlation. The clipped correlation showed an equivalent performance with the scaled correlation except for the case of non-Gaussian fluctuation, where the measured diameter became inaccurate more rapidly with decreasing particle concentration in the scattering volume. The cause of such an instability of PCS in the clipped mode is attributed to baseline fluctuations of the correlogram induced by information loss of the clipped correlator.     

Diffusion Behaviour of Fe-Cu Interface of Copper Brazed Double-wall Steel Tubes

By means of electron probe(EPMA),scanning electron microscope(SEM),and optical microscope(QM),the diffusion behaviour on the Fe-Cu interface of copper brazed double-wall steel tubes andthe microstructure of the diffusion layer have been investigated.There are three kinds of metallurgicalbonds between copper plating layer and steel substrate: (1)the Cu diffusing into steel substratealong grain boundary of ferrite;(2)the Cu diffusion into grain bulk of ferrite: (3)the Fe diffusing intoCu layer.The copper brazed double-wall steel tubes are formed by the combination of the diffusionsmentioned above and this is the reason for excellent mechanical and technological properties of thecopper brazed double-wall steel tubes.     

On the solubility of aluminum in cryolitic melts

The solubility of aluminum in NaF-AlF₃-Al₂O₃ melts with various additives was found to increase with increasing NaF/AlF₃ molar ratio (CR) and increasing temperature and to decrease with additions of A1₂O₃, CaF₂, MgF₂, and LiF to the melts. With the use of literature data for the activities of NaF and A1F₃ in cryolitic melts, three dissolution reaction models were found to give a good fit to the experimental solubility data. According to the most probable of these models the total concentration of dissolved aluminum (aluminum and sodium species) is given by c_Al = c_Na(diss) + c_AlF2- + c_Al2F3- + c_Al3F4- + c_Al4F5- In NaF rich melts, aluminum will dominantly dissolve as sodium, while at cryolite ratios commonly used in aluminum electrowinning (CR = 2.25 to 2.7) the AlF _-2 ^- -ion is the predominant dissolved metal species. Other species (A1₂F₃ ^-, A1₃F₄-, A1₄F₅-) were found to be of some significance only in melts with high excess A1F₃ (CR < 2).