Wear behavior of natural diamond tool in cutting tungsten-based alloy

Natural diamond tool is quickly worn out while cutting a workpiece made of a tungsten-based alloy. This paper presents a new approach to reduce tool wear: ultrasonic vibration cutting of a workpiece made of a tungsten-based alloy based on gas–liquid atomization cooling. An atomizer is a device which mixes carbon dioxide gas with vegetable oil and changes the liquid into minute droplets, which are carried by a stream of gas. Atomizer is also a device that incorporates a venture device to translate liquid into a gas stream. The atomized minute droplets act as the cooling and lubricating medium to protect the tools. The system is designed to ensure that droplets can spread all over the surface of a work piece. At a constant spindle speed, feed rate, and cutting depth, the experiments were carried out for investigating the effects of the tool vibration parameters, carbon tetrachloride liquid flow rate, carbon dioxide gas flow, and gas–liquid mass ratio on the tool wear. The experiments showed that the technology of ultrasonic vibration with gas–liquid atomization cooling effectively prolongs the tool life in cutting tungsten-based alloy.     

Evaluation of machinability and economic performance in cryogenic-assisted hard turning of α-β titanium: a step towards sustainable manufacturing

Abstract

Titanium, a difficult-to-cut material, consumes higher time and cost in removing material by machining to produce parts. Machining of Ti alloys has got serious attention owing to its reactive nature with tool materials at elevated temperature that aggravates tool wear. Reportedly, effective and efficient cooling and lubrication at the tool–work interface can ameliorate the machinability of Ti-alloys. In this perspective, this article interrogates the underlying mechanism of critical responses such as surface roughness, temperature, tool life and machining cost under dry, minimum quantity lubrication (MQL) and cryogenic liquid nitrogen (LN2) modes. The effect of cutting speeds and feed rates on such responses have been considered as a function of cooling strategy to standardize the cooling technique as the best alternative for machining. Cryogenic cooling seems to be preponderant regarding machining cost, temperature, surface roughness and tool life in hard turning of a–b titanium alloy. The feasibility of cryogenic cooling was investigated using the iso-response technique in comparison with dry and MQL-assisted hard turning. Experimental results revealed longer tool life and lower machining cost under cryogenic condition followed by MQL and dry machining. Moreover, cryogenic LN2 has been identified as an appropriate alternative to reduce the temperature and surface roughness. On contrary, dry turning evoked a high-temperature and rapid tool wear. In a nutshell, cryogenic assisted hard turning has acceded as a sustainable strategy from an environmental and economic perspective.     

pH Responsive Abelmoschus esculentus Mucilage and Administration of Methotrexate: In-Vitro Antitumor and In-Vivo Toxicity Evaluation

The rapid progression in biomaterial nanotechnology apprehends the potential of non-toxic and potent polysaccharide delivery modules to overcome oral chemotherapeutic challenges. The present study is aimed to design, fabricate and characterize polysaccharide nanoparticles for methotrexate (MTX) delivery. The nanoparticles (NPs) were prepared by Abelmoschus esculentus mucilage (AEM) and chitosan (CS) by the modified coacervation method, followed by ultra-sonification. The NPs showed much better pharmaceutical properties with a spherical shape and smooth surface of 213.4–254.2 nm with PDI ranging between 0.279–0.485 size with entrapment efficiency varying from 42.08 ± 1.2 to 72.23 ± 2.0. The results revealed NPs to possess positive zeta potential and a low polydispersity index (PDI). The in-vitro drug release showed a sustained release of the drug up to 32 h with pH-dependence. Blank AEM -CS NPs showed no in-vivo toxicity for a time duration of 14 days, accompanied by high cytotoxic effects of optimized MTX loaded NPs against MCF-7 and MD-MBA231 cells by MTT assay. In conclusion, the findings advocated the therapeutic potential of AEM/CS NPs as an efficacious tool, offering a new perspective for pH-responsive routing of anticancer drugs with tumor cells as a target.     

A Novel Sprague-Dawley Rat Model Presents Improved NASH/NAFLD Symptoms with PEG Coated Vitexin Liposomes

Chronic liver disease (CLD) is a global threat to the human population, with manifestations resulting from alcohol-related liver disease (ALD) and non-alcohol fatty liver disease (NAFLD). NAFLD, if not treated, may progress to non-alcoholic steatohepatitis (NASH). Furthermore, inflammation leads to liver fibrosis, cirrhosis, and hepatocellular carcinoma. Vitexin, a natural flavonoid, has been recently reported for inhibiting NAFLD. It is a lipogenesis inhibitor and activates lipolysis and fatty acid oxidation. In addition, owing to its antioxidant properties, it appeared as a hepatoprotective candidate. However, it exhibits low bioavailability and low efficacy due to its hydrophobic nature. A novel rat model for liver cirrhosis was developed by CCL4/Urethane co-administration. Vitexin encapsulated liposomes were synthesized by the ‘thin-film hydration’ method. Polyethylene glycol (PEG) was coated on liposomes to enhance stability and stealth effect. The diseased rats were then treated with vitexin and PEGylated vitexin liposomes, administered intravenously and orally. Results ascertained the liposomal encapsulation of vitexin and subsequent PEG coating to be a substantial strategy for treating liver cirrhosis through oral drug delivery.     

Dandelion-Like Bi2S3/rGO hierarchical microspheres as high-performance anodes for potassium-ion and half/full sodium-ion batteries

Sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) have been considered as attractive alternatives for next-generation battery systems, which have promising application potential due to their earth abundance of potassium and sodium, high capacity and suitable working potential, however, the design and application of bi-functional high-performance anode still remain a great challenge up to date. Bismuth sulfide is suitable as anode owing to its unique laminar structure with relatively large interlayer distance to accommodate larger radius ions, high theoretical capacity and high volumetric capacity etc. In this study, dandelion-like Bi₂S₃/rGO hierarchical microspheres as anode material for PIBs displayed reversible capacity, and 206.91 mAh·g⁻¹ could be remained after 1,200 cycles at a current density of 100 mA·g⁻¹. When applied as anode materials for SIBs, 300 mAh·g⁻¹ could be retained after 300 cycles at 2 A·g⁻¹ and its initial Coulombic efficiency is as high as 97.43%. Even at high current density of 10 A·g⁻¹, 120.3 mAh·g⁻¹ could be preserved after 3,400 cycles. The Na₃V₂(PO₄)₃@rGO//Bi₂S₃/rGO sodium ion full cells were successfully assembled which displays stable performance after 60 cycles at 100 mA·g⁻¹. The above results demonstrate that Bi₂S₃/rGO has application potential as high performance bi-functional anode for PIBs and SIBs.

     

Characterization of Ba4.5Re9Ti18O54 (Re = La,Nd) microwave dielectric ceramics

Ba_4.5Re₉Ti₁₈O₅₄ (Re = La, Nd) ceramics were prepared via a solid state mixed oxide route. X-ray diffraction (XRD) analysis revealed the formation of the major Ba_4.5Re₉Ti₁₈O₅₄ phase along with rutile (TiO₂) as a secondary phase. Rietveld structure refinement of the recorded XRD data confirmed that the crystal structure of Ba_4.5Nd₉Ti₁₈O₅₄ (BNT) was orthorhombic (Pnma) with unit cell parameters a = 22.3412 Å, b = 7.6824 Å and c = 12.1952 Å. Ba_4.5La₉Ti₁₈O₅₄ (BLT) exhibited high relative permittivity (95.6), low quality factor (2,102 GHz) and a high temperature coefficient of resonance frequency (+352 ppm/°C). The substitution of Nd for La caused a decrease in both the relatively permittivity and temperature coefficient of resonance frequency to 84.2 and 167 ppm/°C respectively and an increase in quality factor to 8,007 GHz. Raman spectroscopic analysis revealed that lattice defects may be responsible for the observed decrease in quality factor of BLT ceramics in comparison to BNT. The Raman shifts at 533.5 and 613.6 cm^?1, related to Ti–O bond stretching, decreased for BNT ceramics, which may be a possible reason for the observed decrease in relative permittivity.     

Performance of microwave synthesized dual solvent dope solution and lithium bromide additives on poly(ethersulfone) membranes

BACKGROUND: Generally the fabrication of polymeric membranes is a complicated and expensive process since it involves several steps. The preliminary preparation steps involve polymer drying and dissolution and is very time consuming and expensive. Currently, conventional electrothermal heating (CEH) is used to dissolve polyethersulfone in an aprotic solvent for membrane fabrication. Usually CEH requires 6 to 8 h at temperatures of 80 to 95 °C. This paper reports the fabrication and characterization of polyethersulfone (PES) asymmetric ultrafiltration membrane made from microwave (MW) synthesis casting solution consisting of various compositions of double solvents and lithium bromide (LiBr) additive. RESULTS: Homogeneous dual solvent dope solutions prepared via microware irradiation took only 1 h instead of the 7 h when prepared using CEH. The results also revealed that the membrane permeation and rejection rates, pore size and porosity were dependent on the ratio of LiBr to acetone. Membranes with LiBr kept at 2 and 3 wt% exhibited both high rejection and permeation rates with minimum pore sizes of 1.067 and 1.214 nm respectively. The presence of LiBr and the occurrence of chain scission were elucidated using Fourier transform infrared (FTIR) spectroscopy while its hydrophilic property was confirmed by water absorption and contact angle measurements. CONCLUSIONS: It was concluded that the microwave technique is capable of producing 1 L membrane solutions in less than 1 h. The membranes prepared from the microwave solutions show good rejection and permeation rates. Copyright © 2011 Society of Chemical Industry     

Probabilistic Strength at Serviceability Limit State for Normal and SBHS Slender Stiffened Plates Under Uniaxial Compression

International Journal of Steel Structures - Stiffened plates with high slenderness parameters show large out-of-plane deflections, due to elastic buckling, which may occur before the plates reach...     

Structural and thermoelectric properties of hydrothermal-processed Ag-doped Fe2O3

Fe_2-xAg_xO₃ (0?≤?x?≤?0.04) nanopowders with various Ag contents were synthesized at different hydrothermal reaction temperatures (150?°C and 180?°C). Their structural properties were fully investigated through an X-ray diffraction, a Fourier transform infrared spectroscopy, and an X-ray photoelectron spectroscopy. The hydrothermal reaction temperature, time, and Ag content remarkably affected the morphological characteristics and crystal structure of the synthesized powders. The Fe_2-xAg_xO₃ (0?≤?x?≤?0.04) powders synthesized at 150?°C for 6?h and the Fe_2-xAg_xO₃ (0.02?≤?x?≤?0.04) powders synthesized at 180?°C for 12?h formed the orthorhombic α-FeOOH phase with a rod-like morphology, whereas the Fe_2-xAg_xO₃ (0?≤?x?≤?0.01) powders synthesized at 180?°C for 12?h formed the rhombohedral α-Fe₂O₃ phase with a spherical-like morphology. The Fe_1.98Ag_0.02O₃ fabricated by utilizing Fe_1.98Ag_0.02O₃ powders synthesized at 180?°C showed the largest power factor (0.64?×10^?5 Wm^?1 K^?2) and dimensionless figure-of-merit (0.0036) at 800?°C.     

Current-mode active-only universal filter

A novel current-mode active-only universal filter based on and employing three DO-CCCIIs and two OAs is introduced. The circuit is fully integrable and programmable, and implements all the five generic filtering functions. The three basic filtering responses LP, BP and HP are implemented simultaneously by the circuit, while AP and notch signals can be realized simply by connecting appropriate node currents. The currents are available at high output impedances, so the synthesized filter can be cascaded without additional buffers to realize higher order filters. The filter performance factors ω ₀ and Q are electronically tunable in an orthogonal manner through separate bias currents of the CCCII. The PSPICE simulation was carried out to realize the proposed circuit.