Bioinspired Magnetite Crystallization Directed by Random Copolypeptides

Control over magnetite (Fe₃O₄) formation is difficult to achieve in synthetic systems without using non‐aqueous media and high temperatures. In contrast, Nature employs often intrinsically disordered proteins to tightly tailor the size, shape, purity, and organization of the nanocrystals to optimize their magnetic properties. Inspired by such “flexible polyelectrolytes,” here random copolypeptides having different amino acid compositions are used as control agents in the bioinspired coprecipitation of magnetite through a ferrihydrite precursor, following a recently developed mineralization protocol. Importantly, the copolypeptide library is designed such that the amino acid composition can be optimized to simultaneously direct the size of the nanoparticles as well as their dispersibility in aqueous media in a one‐pot manner. Acidic amino acids are demonstrated to regulate the crystal size by delaying nucleation and reducing growth. Their relative content thus can be balanced to tune between the superparamagnetic and ferrimagnetic regimes, and high contents of negatively charged amino acids result in colloidal stabilization of superparamagnetic nanoparticles at high pH. Conversely, with positively charged lysine‐rich copolypeptides ferrimagnetic crystals are obtained which are stabilized at neutral pH and self‐organize in chains, as visualized by cryo‐transmission electron microscopy. Altogether, the presented findings give important insights for the future development of additive‐mediated nanomaterial syntheses.     

A PRACTICAL METHOD FOR RECTIFYING INTERFACIAL TENSION DATA TO PREDICT THE SHAPE OF INTERFACES IN AN IMMISCIBLE LIQUID/LIQUID/GAS SYSTEM

The shape of interfaces formed by the contact of two liquid phases, immiscible with each other, and a gaseous phase can be predicted on the condition that the tension to work at each interface is known with a sufficient accuracy. In general, interfacial tension data available are not so accurate, however, as to be useful as they are in predicting the shape of interfaces, particularly when the spreading coefficient of either liquid (liquid 1) on the other (liquid 2) has a negative value of a small magnitude. Presented in this note is a simple method to rectify the interfacial tension data, with the aid of a measurement of the radius of a lens of liquid 1 of a known volume placed on the horizontal surface of liquid 2, and thereby make them usable for predicting interfacial geometries. The method is tested by applying it to benzene/water and n-pentane/water systems.     

Synthesis and characterization of poly(N-tert-alkylmaleimide)s

N-tert-Butylmaleimide (tBMI) polymerized readily in the presence of a radical initiator in spite of its bulky N-substituent to give a high molecular weight and less-flexible poly(substituted methylene). From kinetic investigation for the polymerization of tBMI with 2,2-azobisisobutyronitrile (AIBN) in benzene, it was revealed that the rate of polymerization (R _p) was expressed as R _p=k [AIBN]^0.51[tBMI]^1.4, and the overall activation energy was 99.6 kJ/mol. The high polymerization of tBMI was assumed to result from the decrease in the rate of bimolecular termination between rigid polymer radicals bearing a bulky substituent. The flexibility of the polymer chain was examined by the viscometric and light scattering methods, and the effect on the polymerization reactivity was discussed.     

Measurement of RF Transmission Mode in ITER Relevant EC H&;CD Transmission Line

The preliminary results of mode measurement in the ITER relevant 40 m long transmission test line composed from 63.5 mm diameter corrugated waveguides and miter bends are presented. The field patterns were measured by taking temperature profiles on a paper screen placed in front of the waveguide end using an infrared imaging camera. The complex electric field at the waveguide end was retrieved from the measured temperature profiles. As a result, the transmission power includes 87% of HE₁₁ mode and 6% of LP₁₁ odd (HE₂₁+TE₀₁) mode and small ratios of other modes. The mode content had small dependence on length of the transmission line. This result indicated that the higher order mode content generated at the input of the transmission line is conserved and propagated through the transmission line. This suggests that the initial RF coupling to the waveguide is critical since it affects the launcher efficiency.     

Solution‐Processed Silicane Field‐Effect Transistor: Operation Due to Stacking Defects on the Channel

2D silicon nanomaterials have unique potential for use in applications owing to their many different exotic electronic properties. Field‐effect transistors are fabricated based on free‐standing silicanes through a solution process. Owing to the sensitive surface and the nanometer thickness, the devices require the use of fabrication conditions similar to those of lithium‐ion batteries to prevent oxidation of the sheets. Reliable transistor performance is observed at room temperature in a channel thinner than 3 nm, as drain voltage dependent transfer curves current modulation, depending on the edge effect of the silicane, although the transistor property is modest (hole mobility of 1.8 cm² V^?1 s^?1). The results suggest the feasibility of other air‐sensitive 2D nanomaterials for applications in nanoelectronic devices.     

Determination of Thermoelectric Module Efficiency: A Survey

The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many TE, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide end-users with realistic values for how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated a lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method, and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, different systems often showed large differences that are likely caused by uncertain heat loss and thermal resistance. Efficiency testing is an important capability for the thermoelectric community to improve. A follow-up international standardization effort is planned.     

A New Approach to Suppress the Effect of Machining Error for Waveguide Septum Circular Polarizer at 230 GHz Band in Radio Astronomy

A new stepped septum-type waveguide circular polarizer (SST-CP) was developed to operate in the 230 GHz band for radio astronomy, especially submillimeter-band VLBI observations. For previously reported SST-CP models, the 230 GHz band is too high to achieve the design characteristics in manufactured devices because of unexpected machining errors. To realize a functional SST-CP that can operate in the submillimeter band, a new method was developed, in which the division surface is shifted from the top step of the septum to the second step from the top, and we simulated the expected machining error. The SST-CP using this method can compensate for specified machining errors and suppress serious deterioration. To verify the proposed method, several test pieces were manufactured, and their characteristics were measured using a VNA. These results indicated that the insertion losses were approximately 0.75 dB, and the input return losses and the crosstalk of the left- and right-hand circular polarization were greater than 20 dB at 220–245 GHz on 300 K. Moreover, a 230 GHz SST-CP was developed by the proposed method and installed in a 1.85-m radio telescope receiver systems, and then had used for scientific observations during one observation season without any problems. These achievements demonstrate the successful development of a 230 GHz SST-CP for radio astronomical observations. Furthermore, the proposed method can be applicable for observations in higher frequency bands, such as 345 GHz.     

Studies on Effective Utilization of SOFC Exhaust Heat Using Thermoelectric Power Generation Technology

Solid oxide fuel cells (SOFCs) are being researched around the world. In Japan, a compact SOFC system with rated alternative current (AC) power of 700 W has become available on the market, since the base load electricity demand for a standard home is said to be less than 700 W AC. To improve the generating efficiency of SOFC systems in the 700-W class, we focused on thermoelectric generation (TEG) technology, since there are a lot of temperature gradients in the system. Analysis based on simulations indicated the possibility of introducing thermoelectric generation at the air preheater, steam generator, and exhaust outlet. Among these options, incorporating a TEG heat exchanger comprising multiple CoSb₃/SiGe-based TEG modules into the air preheater had potential to produce additional output of 37.5 W and an improvement in generating efficiency from 46% to 48.5%. Furthermore, by introducing thermoelectric generation at the other two locations, an increase in maximum output of more than 50 W and generating efficiency of 50% can be anticipated.