Clinical proteomics: Promises,challenges and limitations of affinity arrays

After the establishment of DNA/RNA sequencing as a means of clinical diagnosis, the analysis of the proteome is next in line. As a matter of fact, proteome-based diagnostics is bound to be even more informative, since proteins are directly involved in the actual cellular processes that are responsible for disease. However, the structural variation and the biochemical differences between proteins, the much wider range in concentration and their spatial distribution as well as the fact that protein activity frequently relies on interaction increase the methodological complexity enormously, particularly if an accuracy and robustness is required that is sufficient for clinical utility. Here, we discuss the contribution that protein microarray formats could play towards proteome-based diagnostics.     

Resource management model and performance evaluation for satellite communications

Efficient resource management is mandatory to achieve maximum system capacity for next generation communications systems. Resource management deals with the available spectral band, time, power, and space for a transmission signal. It includes (i) the frequency planning, (ii) the selection of transmit power, and (iii) the assignment of the channels and access nodes to the users. The paper presents a generalized notation as well as graph algorithms for resource management problems. Impairment graphs can be used for frequency planning, whereas flow graphs are suitable for channel access problems. To evaluate the performance of the resource management, service criteria (such as blocking or the carrier to interference ratio C/I) or efficiency criteria (bandwidth requirements) can be derived from the graphs. The resource management techniques are applied to satellite networks with non‐geostationary orbits yielding time‐variant network topologies. As a simple example, the channel assignment and capacity optimization of the EuroSky Way system are shown. Furthermore, a comparison of fixed, dynamic and hybrid channel allocation schemes (FCA, DCA, HCA) for a typical MEO satellite scenario is given. Satellite diversity and its impact on bandwidth requirement and transmission quality is also examined. Finally, it is shown how spread spectrum systems can be investigated with the presented tools. Copyright © 2001 John Wiley & Sons, Ltd.     

Beschreibung von Ver- und Entfestigungsvorgängen am Beispiel austenitformgehärteter Stähle mit Hilfe von Fließkurven

Fließkurven beschreiben das Formänderungsvermögen von Werkstoffen. Gleichzeitig liefern sie Informationen über die Wechselwirkung zwischen der Ver- und Entfestigung, wobei diese beiden Eigenschaften temperaturabhängig sind. Fließkurven wurden an Stählen aufgenommen, die sich im wesentlichen in ihrem Kohlenstoffgehalt unterscheiden. Die Bestimmung der Formänderungsfähigkeit erfolgte bei Temperaturen, die denen entsprechen, bei denen eine Austenitformhärtung vorgenommen wird. Die mathematische Beschreibung der Fließkurven läßt erkennen, daß zunächst mit steigender Umformtemperatur die Verfestigungsrate abnimmt. Der Kohlenstoffgehalt erhöht dagegen die Verfestigungsrate. Die dynamische Erholung wird mit wachsender Umformtemperatur beschleunigt, ebenso mit steigendem Kohlenstoffgehalt.     

用空气建造——有感于200首尔设计奥林匹克气膜建筑

气膜建筑的外围结构采用了柔软的薄膜。想象一下未来建筑外围结构在这方面将如何发展？那真是其乐无穷！就目前来看，当今建筑的发展越来越强调提高能源、材料方面的利用效率。     

Off-axis and inline electron holography: Experimental comparison

Electron holography is a very powerful technique for mapping static electric and magnetic potentials down to atomic resolution. While electron holography is commonly considered synonymous with its off-axis variant in the high energy electron microscopy community, inline electron holography is widely applied in low-energy electron microscopy, where the realization of the off-axis setup is still an experimental challenge. This paper demonstrates that both inline and off-axis holography may be used to recover amplitude and phase shift of the very same object, in our example latex spheres of 90 and 200 nm in diameter, producing very similar results, provided the object does not charge under the electron beam.     

Manufacturer-independent mechatronic information model for control systems

Modular system-based engineering is the key to a quick, customized machine and plant configuration. This approach is seen as the best method to implement different functional requirements with a minimum amount of resources. The interdisciplinary configuration of control systems to automate machines has previously not been supported by engineering tools. This is partially due to the lack of standardized mechatronic information models. The machine manufacturer is required to create the necessary mechatronic information models uniquely for each control system independently. Thus, he does not comply with any modeling specifications. As a result, the mechatronic information models are not applicable for other control system architectures. The conventionally used mechatronic information models as well as the manufacturer-specific engineering tools define the control hardware components and their configurations. An abstraction of the logical and functional layers does not take place. Consequently, a mechatronic control architecture model is required. This architecture can serve as a modeling basis in modular system-based interdisciplinary engineering tools. Therefore, an approach to a manufacturer independent, mechatronic information model for control systems is the subject of this article.     

The statistics of the thermal motion of the atoms during imaging process in transmission electron microscopy and related techniques

The concern of this work is the influence of the thermal motion of the atoms on electron scattering simulations, used for quantitative interpretation of results in high-resolution electron microscopy. We distinguish between the influence of inelastic phonon excitation and the effect of a moving lattice on images generated by elastically scattered electrons. It is shown that, analog to aberrations, the impact of a moving lattice differs substantially with respect to different imaging conditions and cannot be described by the Debye–Waller damping applicable in XRD. We derive a new formalism, based on the frozen lattice and multislice approach, to incorporate the statistics of the thermal motion into elastic TEM imaging simulations, taking into account different imaging conditions. The averaging over different atom positions is generally performed within a density matrix framework, which can be linearized in the special case of off-axis electron holography. All findings are supported by explicit numerical simulations: molecular dynamics simulations are performed to get a realistic thermal motion and the electron scattering simulations are performed within the new multislice algorithm.     

Study of the technological parameters of ultrasonic nebulization.

The principle of an ultrasonic nebulizer is based on the vibrations of a piezoelectric crystal driven by an alternating electrical field. These periodic vibrations are characterized by their frequency, their amplitude, and their intensity, which corresponds to the energy transmitted per surface unit. When the vibration in tensity is sufficient, cavitation occurs, and droplets are generated. Ventilation enables airflow to cross the nebulizer and to expel the aerosol droplets. For a given nebulizer, the vibration frequency of the piezoelectric crystal is fixed, often in the range 1-2.5MHz. In most cases, an adjustment in vibration intensity is possible by modifying vibration amplitude. The ventilation level is adjustable. The vibrations may be transmitted through a coupling liquid--commonly water--to a nebulizer cup containing the solution to be aerosolized. In this work, we studied the influence of the technological parameters of ultrasonic nebulization on nebulization quality. Our study was carried out with a 9% sodium chloride solution and a 2% protein solution (alpha1 protease inhibitor). Three different ultrasonic nebulizers were used. An increase in vibration frequency decreased the size of droplets emitted. The coupling liquid absorbed the energy produced by the ultrasonic vibrations and canceled out any heating of the solution, which is particularly interesting for thermosensitive drugs. An increase in vibration intensity did not modify the size of droplets emitted, but decreased nebulization time and raised the quantity of protein nebulized, thus improving performance. On the other hand, an increase in ventilation increased the size of emitted droplets and decreased nebulization time and the quantity of protein nebulized because more drug was lost on the walls of the nebulizer. High intensity associated with low ventilation favors drug delivery deep into the lungs.     

原装德国SPS(R) PEH先进刮胶技术

每台SPS STOP滚筒丝网印刷机都拥有一个独特的PEH(气压、电动、液压式)刮胶系统.该创新技术及精密结构一经问世,就成为诸多网印设备制造商竞相模仿的对象,但直到今天,仍没有一项其他技术可与之相媲美,也因此,SPS仍牢牢占据市场领导地位.