Films formed from polystyrene latex/clay composites: A fluorescence study

This study reports a steady-state fluorescence (SSF) technique for studying film formation from surfactant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (t₃) of polystyrene. During the annealing processes, the transparency of the film improved considerably. Scattered light (I_s) and fluorescence intensity (I_p) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I_tr. Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite films. Minimum film formation temperature, T_q, and healing temperatures, T_h, were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.     

Efficiency of Gold Nano Particles on the Autoxidized Soybean Oil Polymer: Fractionation and Structural Analysis

Polyunsaturated plant oils have gained great interest as monomers to produce biodegradable polymers obtained from renewable resources due to the limited existing sources of petroleum oil and environmental issues. Soybean oil was autoxidized by exposure to atomospheric oxygen at room temperature with or without the presence of gold nanoparticles (Au NPs) 5–41 days. When the autoxidation process was catalyzed with Au NPs, the molecular weight of the oxidized oil was increased in 5 days. In contrast to this, without Au NPs, the oxidized oil was still a fluidized liquid. Autoxidized soybean oil polymer in toluene solution with gold NP showed a surface plasmon resonance at λ_max = 540 nm in a UV–VIS spectrometer and a fluorescence emission spectrum at λ_max = 450 nm, when it was irradiated at λ_max = 390 nm. The higher molecular weight of the polymeric oils was successively fractionated by the extraction from the solvent‐non‐solvent mixture CHCl₃/petroleum ether with the volume ratio of 5:15. Three polymeric oils fractions with different molecular weight (ca 1000, 4000, and 40,000 g/mol) were obtained. GC–MS analysis, ¹H‐NMR and GPC techniques were used in the structural analysis of the fractionated polymeric oils.     

Molasses and air blown coal tar pitch binders for the production of metallurgical quality formed coke from anthracite fines or coke breeze

The effect of the type and the amount of hardeners, such as ammonium nitrate, ammonium carbonate and nitric acid on the molasses bonded briquettes prepared from anthracite fines or coke breeze were investigated. Amongst the hardener studied the best results were obtained with 2.5% ammonium nitrate hardener. The briquettes produced with this hardener were highly water resistant but not waterproof and their tensile strengths were not adequate to be used as a substitute for the metallurgical coke. Therefore, the briquettes were prepared with molasses containing 2.5% ammonium nitrate hardener and air blown coal tar pitch blended binder. When the blended binder was used for the production of anthracite fines or coke breeze briquettes, after curing at 200 °C for 2 h, they became waterproof and their tensile strengths were found to be sufficient to be used as a substitute for coke oven coke. The briquettes after curing could be directly charged into the blast furnace without carbonizing them at high carbonization temperatures. Since molasses and coal tar pitch, are relatively cheap and readily available materials, the process investigated could be economical way of producing high quality formed coke.     

Excitation energy-dependent nature of Raman scattering spectrum in GaInNAs/GaAs quantum well structures

The excitation energy-dependent nature of Raman scattering spectrum, vibration, electronic or both, has been studied using different excitation sources on as-grown and annealed n- and p-type modulation-doped Ga_1 − xIn_xN_yAs_1 − y/GaAs quantum well structures. The samples were grown by molecular beam technique with different N concentrations (y = 0%, 0.9%, 1.2%, 1.7%) at the same In concentration of 32%. Micro-Raman measurements have been carried out using 532 and 758 nm lines of diode lasers, and the 1064 nm line of the Nd-YAG laser has been used for Fourier transform-Raman scattering measurements. Raman scattering measurements with different excitation sources have revealed that the excitation energy is the decisive mechanism on the nature of the Raman scattering spectrum. When the excitation energy is close to the electronic band gap energy of any constituent semiconductor materials in the sample, electronic transition dominates the spectrum, leading to a very broad peak. In the condition that the excitation energy is much higher than the band gap energy, only vibrational modes contribute to the Raman scattering spectrum of the samples. Line shapes of the Raman scattering spectrum with the 785 and 1064 nm lines of lasers have been observed to be very broad peaks, whose absolute peak energy values are in good agreement with the ones obtained from photoluminescence measurements. On the other hand, Raman scattering spectrum with the 532 nm line has exhibited only vibrational modes. As a complementary tool of Raman scattering measurements with the excitation source of 532 nm, which shows weak vibrational transitions, attenuated total reflectance infrared spectroscopy has been also carried out. The results exhibited that the nature of the Raman scattering spectrum is strongly excitation energy-dependent, and with suitable excitation energy, electronic and/or vibrational transitions can be investigated.     

Synthesis,structural characterization,and antiproliferative/cytotoxic effects of a novel modified poly(maleic anhydride-co-vinyl acetate)/doxorubicin conjugate

Polymer Bulletin - Drug carrier, poly(maleic anhydride-co-vinyl acetate) (MAVA or poly[MA-co-VA]) copolymer, was traditionally synthesized by free radical chain polymerization reaction, in methyl...     

Cocaine Induces Cytoskeletal Changes in Cardiac Myocytes: Implications for Cardiac Morphology

Cocaine is one of the most widely abused illicit drugs worldwide and has long been recognised as an agent of cardiac dysfunction in numerous cases of drug overdose. Cocaine has previously been shown to up-regulate cytoskeletal rearrangements and morphological changes in numerous tissues; however, previous literature observes such changes primarily in clinical case reports and addiction studies. An investigation into the fundamental cytoskeletal parameters of migration, adhesion and proliferation were studied to determine the cytoskeletal and cytotoxic basis of cocaine in cardiac cells. Treatment of cardiac myocytes with cocaine increased cell migration and adhesion (p < 0.05), with no effect on cell proliferation, except with higher doses eliciting (1–10 μg/mL) its diminution and increase in cell death. Cocaine downregulated phosphorylation of cofilin, decreased expression of adhesion modulators (integrin-β3) and increased expression of ezirin within three hours of 1 μg/mL treatments. These functional responses were associated with changes in cellular morphology, including alterations in membrane stability and a stellate-like phenotype with less compaction between cells. Higher dose treatments of cocaine (5–10 μg/mL) were associated with significant cardiomyocyte cell death (p < 0.05) and loss of cellular architecture. These results highlight the importance of cocaine in mediating cardiomyocyte function and cytotoxicity associated with the possible loss of intercellular contacts required to maintain normal cell viability, with implications for cardiotoxicity relating to hypertrophy and fibrogenesis.     

A direct borohydride-peroxide fuel cell-LiPO hybrid motorcycle prototype: Investigation of short-term behavior of DBPFC stack – I

In the present study, a safer and more performance 270?W Direct Borohydride/Peroxide Fuel Cell (DBPFC) Stack has been constructed for an electrical hybrid motorbike application. Performance tests were carried out with single cell and 5–10–25?cell stacks. Performance loss has been not observed while stacking DBPFC because of the Independent Cell Liquid Distribution Network (ICLDN) system and special bipolar plate design. The power densities have been approximately 120?mWcm^?2 for a single DBPFC and 25-cell DBPFC stack without any stacking loss. Additionally, the stack temperature has been controlled by keeping the oxidant concentration low, and it has been maintained at approximately 52?°C without using a cooling system. The short-term performances of the 25-cell DBPFC stack have been tested over 25?min and 50?min, which showed that the performance and stack security of the DBPFC are highly related to the oxidant properties, such as the concentration, temperature and feed type.     

Nigella sativa oil entrapped polycaprolactone nanoparticles for leishmaniasis treatment

This study is the first to investigate the antileishmanial activities of Nigella sativa oil (NSO) entrapped poly‐ɛ ‐caprolactone (PCL) nanoparticles on Leishmania infantum promastigotes and amastigotes in vitro. NSO molecules with variable initial doses of 50, 100, 150, and 200 mg were successfully encapsulated into PCL nanoparticles identified as formulations NSO1, NSO2, NSO3, and NSO4, respectively. This process was characterised by scanning electron microscope, dynamic light scattering, Fourier transform infrared, encapsulation efficiency measurements, and release profile evaluations. The resulting synthetised nanoparticles had sizes ranging between 200 and 390 nm. PCL nanoparticles encapsulated 98% to 80% of initial doses of NSO and after incubation released approximately 85% of entrapped oil molecules after 288 h. All investigated formulations demonstrated strong antileishmanial effects on L. infantum promastigotes by inhibiting up to 90% of parasites after 192 h. The tested formulations decreased infection indexes of macrophages in a range between 2.4‐ and 4.1‐fold in contrast to control, thus indicating the strong anti‐amastigote activities of NSO encapsulated PCL nanoparticles. Furthermore, NSO‐loaded PCL nanoparticles showed immunomodulatory effects by increasing produced nitric oxide amounts within macrophages by 2–3.5‐fold in contrast to use of free oil. The obtained data showed significant antileishmanial effects of NSO encapsulated PCL nanoparticles on L. infantum promastigotes and amastigotes.Inspec keywords: antibacterial activity, drug delivery systems, nanofabrication, nitrogen compounds, nanomedicine, microorganisms, cellular biophysics, diseases, scanning electron microscopy, oils, polymers, biomedical materials, nanoparticles, encapsulation, Fourier transform infrared spectraOther keywords: encapsulation efficiency measurements, entrapped oil molecules, investigated formulations, NSO‐loaded PCL nanoparticles, Nigella sativa oil entrapped polycaprolactone nanoparticles, antileishmanial activities, poly‐ε‐caprolactone nanoparticles, scanning electron microscope, DLS, Fourier transform infrared, release profile evaluations, Leishmania infantum promastigotes, Leishmania infantum amastigotes, parasites, infection, infection indexes, macrophages, immunomodulatory effects, time 288.0 hour, time 192.0 hour, mass 50.0 mg, mass 100.0 mg, mass 150.0 mg, mass 200.0 mg, size 200.0 nm to 390.0 nm     

Photovoltaic textile structure using polyaniline/carbon nanotube composite materials

In this paper, an investigation of flexible electrodes for photovoltaic textile structures utilizing polymer‐based organic materials is presented. The composite structure consisting of a blend of water dispersible carbon nanotube:polyaniline (CNT:PANI) components with poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was applied to be used as the hole collecting electrode in photovoltaic textile applications. Both photovoltaic textiles and conventional solar cells were fabricated by using a blend of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT):(6,6)‐phenyl C61‐butyric acid methyl ester (PCBM). All devices were characterized by measuring current versus voltage characteristics under AM 1.5 conditions. The nanoscale morphology of the photovoltaic structures was investigated using scanning electron microscopy and atomic force microscopy.