Influence of Chemical Reaction on Mass Transport in Yield Stress Exhibiting Flow Regime

Theoretical Foundations of Chemical Engineering - In this study, the simulations for first-order chemical reactions (constructive and destructive) in the flow of the Casson fluid with...     

Preparation and characterization of starch-based composite films reinforced by apricot and walnut shells

Starch-based biodegradable films were prepared by using solution-casting method and reinforced by agricultural residues [apricot and walnut shell (APS and WNS) powder]. The powder of both shells was added in different ratios (0, 2.5, 5, 7.5, and 10%) to investigate the microstructures and performances (mechanical and thermal properties) of the starch-based film. Different techniques such as impact, tensile testing, scanning electron microscope, optical microscope (OM), X-ray diffraction (XRD), water vapor transmission rate (WVTR), and dynamic mechanical analysis were applied to study the thermomechanical and barrier properties of the composite films. Results showed that the incorporation of both shells significantly improved the WVTR and mechanical properties of starch-based films. The shells powder was significantly increased the Young's modulus and tensile strength of the starch-based films. Both OM and SEM results showed reasonably good compatibility between starch and reinforced shells. OM and XRD indicated that the APS and WNS not only retained their crystalline structure in the film but they also strengthened the peak intensity of the film. This phenomenon can be used to explain the mechanism of mechanical reinforcement. Since all the components used in the preparation of the films are food grade ingredients, it is expected that the films developed in this work will be used for food packaging applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47978.     

Prediction of warp and weft yarn crimp in cotton woven fabrics

The aim of this study was to develop statistical models for the prediction of warp and weft crimp percentage of cotton woven fabrics. The developed models are based on the empirical data obtained from carefully developed 60 fabric samples with different yarn linear densities, fabric densities, and weave designs. The predictability and accuracy of the developed models was assessed by correlation analysis of the predicted and actual crimp values of another set of eight fabric samples which was not used for the development of models. The results show fairly good capability and accuracy of the prediction models.     

Light microscopy of Pakistani Berberis leaf cuticles and its taxonomic implications

Taxonomy of the genus Berberis is quite complex, due to overlapping morphological characters, making it very difficult to differentiate the species within the genus. In order to resolve this taxonomic complexity, the foliar anatomy of 10 Berberis L. species was carried out, for the first time from Pakistan, using light microscopy (LM). Significant variation in terms of epidermal cells shape, size, cell wall pattern, and stomata type was observed. B. baluchistanica has the largest epidermal cells, Adaxial: length = 45–(53.9 ± 3.6)–62.5 μm; and width = 22.5–(26.3 ± 1.3)–30 μm; Abaxial: length = 37.5–(43.25 ± 2.5)–50 μm; and width = 20–(22.6 ± 0.8)–25. The highest number of stomata was observed in B. glaucocarpa as 62 on the abaxial surface while the lowest number of stomata was recorded in B. baluchistanica as 8 on the adaxial surface. Of 10 investigated species, 6 possess anomocytic type stomata, while 2 species that is, B. aitchisonii and B. parkeriana have both anomocytic and anisocytic stomata while B. baluchistanica and B. calliobotrys have only paracytic type stomata. The highest number of cells per unit area was present on the adaxial surface of B. calliobotrys ranging from 245–(252.4)–260 followed by B. parkeriana with 209–(227.8)–250 on the abaxial surface. Stomatal index (SI) also varied considerably and was the lowest (2.6) percentage in B. baluchistanica and highest (31.9) percentage in B. kunawurensis. A taxonomic key based on micro‐morphological characters is provided for species identification.     

A packet scheduling scheme for 4G wireless access systems aiming to maximize revenue for the telecom carriers

Efficient utilization of network resources is a key goal for emerging BWAS. This is a complex goal to achieve due to the heterogeneous service nature and diverse QoS requirements of various applications that BWAS support. Packet scheduling is an important activity that affects BWAS QoS outcomes. This paper proposes a new packet scheduling mechanism that improves QoS in mobile wireless networks which exploit IP as a transport technology for data transfer between BWAS base stations and mobile users at the radio transmission layer. In order to improve BWAS QoS the new packet algorithm makes changes at both the IP and the radio layers. The new algorithm exploits handoff priority scheduling principles and takes into account buffer occupancy and channel conditions. The packet scheduling mechanism also incorporates the concept of fairness. The algorithm offers an opportunity to maximize the carriers’ revenue at various traffic situations. Simulation results were compared to well-known algorithms which demonstrated the new packet scheduling algorithm is able to provide a low handoff packet drop rate, low packet forwarding rate, low packet delay, ensure fairness amongst the users of different services and generates higher revenue. Furthermore this research proposes a new and novel measure named “Satisfaction Factor” to measure the efficacy of various scheduling schemes and finally proposes four performance metrics for NodeB’s of in Next Generation Wireless Networks.     

Improving Wheat Productivity in Pakistan: Econometric Analysis Using Panel Data from Chaj in the Upper Indus Basin

Abstract

Increasing water scarcity, degradation of land and water resources, continuing low agricultural productivity, and increasing populations are posing the largest ever challenges for development of agricultural economies in many developing countries including Pakistan. Using panel data from irrigated settings in Chaj sub-basin of the Indus basin in Pakistani Punjab, we attempt to: (a) analyze the causes of low productivity; (b) disentangle factors (both land, water and other factors) contributing to productivity variations; and (c) identify limits and opportunities for narrowing productivity gaps and increasing overall wheat production, with a view to enhance food security for the poor. The results of the study indicate that locational inequities in distribution of canal water, use of groundwater of varying quality, differences in use of seed varieties, and other inputs lead to significant variations in wheat productivity. Key implications are that large gains in wheat productivity are possible by (a) improving the production environment at the tail-end through integrated water management practices; (b) adjusting the mix of canal and groundwater use; and (c) using technological interventions to improve the adoption of modern wheat varieties and dissemination of knowledge on planting dates and timings and application rates of inputs, especially water and fertilizer. Not only such interventions are economically, financially, and environmentally desirable, they are also pro-poor. What is needed is a strong political will and commitment.     

Nickel-ceria infiltrated Nb-doped SrTiO3 for low temperature SOFC anodes and analysis on gas diffusion impedance

This report concentrates on high performance anodes appropriate for SOFCs operating at low temperatures (400–600 °C). Symmetrical cells were made by screen printing of Nb-doped SrTiO₃ (STN) on both sides of a dense ScYSZ electrolyte. Backbones I (36% porosity) and II (47% porosity) were obtained by sintering STN in air and reducing atmosphere, respectively. The porous microstructures were then infiltrated with Ni and Gd-doped CeO₂ (CGO) precursors to incorporate the electrocatalytically active sites. The electrochemical performance of the anode was improved with the increment of Ni-CGO loadings. The gas diffusion impedance was investigated with He and N₂ in H₂/H₂O gas mixtures and by varying the H₂O content at 655 °C. This study indicated that the gas diffusion in these electrodes are influenced by Knudsen and bulk diffusion.     

NUMERICAL MODELING OF HELICAL FLOW OF PSEUDOPLASTIC FLUIDS

The laminar helical flow of non-Newtonian pseudoplastic fluids in concentric and eccentric annuli with a rotating inner cylinder has been investigated numerically. A finite volume algorithm with a nonstaggered grid system is used to analyze the problem. A nonorthogonal curvilinear coordinate system is employed to handle the irregular geometry of aneccentric annulus. The power-law constitutive equation is used to model the shear rate dependent viscosity of a pseudoplastic fluid. The computer code is validated against an available analytical solution for helical flow in a concentric annulus. It is observed that for a certain axial pressure gradient the axial flow rate increases within creasing rotational speed of the inner cylinder. The torque needed to rotate the inner cylinder decreases with increasing axial pressure gradient. These are explained in terms of the shear-thinning effect of a pseudoplastic fluid. The discharge as well as torque are found to increase with increasing eccentricity. The flow field in an eccentric annulus is complex in nature since vigorous secondary flow is produced in addition to the primary axial helical flow. The location and extent of the secondary flow is studied and theresults are presented for various eccentricities. The results will be useful in planning oil and gas well drilling operations.     

Heavy Metals In Water,Suspended Particles,Sediments And Aquatic Plants Of Habbaniya Lake,Iraq

Seasonal samples were taken from four selected stations on the Habbaniya lake, middle of Iraq during 1997, to study six heavy metals (Cu, Cd, Pb, Ni, Mn, and Zn), in water suspended particles, sediments and aquatic plants. Five plant species were collected, represented the most dominant in the lake, namely Myriophyllum verticillatum, Potamogeton crispus, P. pectinatus, Ceratophyllum demersum and Vallisnaria spiralis . Zn had the highest concentration among the studied metals in filtered water and suspended particles with an average of 4.08 w g/l and 26088 w g/g, respectively. Whereas, Mn had the highest in the sediments and all studied aquatic plants, which ranged between 213.3- 2027 w g/g and 100-1725 w g/g, respectively, Meanwhile, Cd had the lowest concentration in all studied samples.     

Enhanced Mechanical Properties and Corrosion Behavior of Biodegradable Mg-Zn/HA Composite

Metallurgical and Materials Transactions A - Magnesium (Mg) and its alloys have shown potential for use in the biomedical industry due to their excellent biological performance and biodegradability...