Geohydrological properties of selected badland sediments in Saskatchewan,Canada

Geological and seasonal weather variations govern the geohydrological properties of the Avonlea badlands in Saskatchewan, Canada. Three surface sediments exhibiting distinct lithologic variations were found: a steeply sloped and fissured sandstone; a mildly sloped and popcorn-textured mudrock; and a flat and eroded pediment. The fines content increased from the dry to the wet state, with contents of 17–33 % seen for sandstone, 4–98 % for mudrock, and 21–42 % for pediment. The water adsorption capacity was found to be highest for mudrock (w _l = 96 % and w _p = 47 %), followed by sandstone (w _l = 39 % and w _p = 31 %), and then by pediment (w _l = 31 % and w _p = 23 %). The soil water characteristic curves of sandstone and mudrock showed bimodal distributions with a low air entry value (6 and 9 kPa) pertaining to drainage through cracks and a high air entry value (160 and 92 kPa) associated with flow through the soil matrix. The pediment presented a unimodal soil water characteristic curve with a single matrix air entry value of 4 kPa. The saturated hydraulic conductivities for sandstone, mudrock, and pediment were measured as 8.5 × 10^?6, 4.0 × 10^?8, and 1.8 × 10^?5 m/s, respectively.     

Model-based design verification for embedded systems through SVOCL: an OCL extension for SystemVerilog

Model Based System Engineering (MBSE) is a renowned approach in the context of embedded systems development. It is frequently used to deal with the structural and behavioral aspects of system design. However, the verification of system design is generally performed in isolation. It is particularly true in the context of assertion based verification. Consequently, there is a huge gap between system design and its verification that seriously effects the productivity and time-to market objectives. Therefore, in this research, we target to reduce this gap by exploiting the features of MBSE and SystemVerilog assertions (SVA’s). This article introduces a novel MBSE approach to model the design verification aspects of embedded systems, along with the system design (structural and behavioral aspects). We propose SystemVerilog in Object Constraint Language (SVOCL), an OCL temporal extension for SystemVerilog, to represent the design verification requirements by means of SVA’s. As a part of research, SVOCL transformation engine has been developed to generate SVA’s code in order to automate the design verification of embedded systems. The application of SVOCL has been validated through four case studies.     

DOE applied to multi-response optimisation study on performance,combustion and emission characteristics of a VCR diesel engine

There are various parameters which may influence the IC engine performance. The trial and error method is a technique used to identify the best parameters. However, this method demands extensive experimental work and results in a great waste of time and resources. Thus, the design of experiments (DOEs) developed by Taguchi is employed. The multi-responses which need to be maximised are brake thermal efficiency, mechanical efficiency, cylinder pressure and cumulative heat release rate, whereas the responses which are to be minimised are specific fuel consumption, oxides of nitrogen and carbon monoxide. In the present study, an optimised DOE(L9) orthogonal array based on the Taguchi statistical method was formulated and a series of experiments were conducted under controlled supervision by considering three different injection operating pressures (IOPs) (200, 220 and 240 bar) and three different compression ratios (CRs) (16.5, 17.5 and 18.5). The main objective of this paper is to find the best suited IOP and CR values which obtain higher performance, better combustion and lower emissions.     

Interactive Instruction in Bayesian Inference

An instructional approach is presented to improve human performance in solving Bayesian inference problems. Starting from the original text of the classic Mammography Problem, the textual expression is modified and visualizations are added according to Mayer’s principles of instruction. These principles concern coherence, personalization, signaling, segmenting, multimedia, spatial contiguity, and pretraining. Principles of self-explanation and interactivity are also applied. Four experiments on the Mammography Problem showed that these principles help participants answer the questions at significantly improved rates. Nonetheless, in novel interactivity conditions, performance was lowered suggesting that more interaction can add more difficulty for participants. Overall, a leap forward in accuracy was found, with more than twice the participant accuracy of previous work. This indicates that an instructional approach to improving human performance in Bayesian inference is a promising direction.     

Shape sensitivity analysis of composites in contact using the boundary element method

This paper presents the application of the boundary element method to the shape sensitivity analysis of two-dimensional composite structures in contact. A directly differentiated form of boundary integral equation with respect to geometric design variables is used to calculate shape design sensitivities for anisotropic materials with frictionless contact. The selected design variables are the coordinates of the boundary points either in the contact or non-contact area. Three example problems with anisotropic material properties are presented to validate the applications of this formulation.     

Effect of precipitation on the geological development of badlands in arid regions

The main objective of this paper was to study the effect of precipitation on the geological development of badlands in arid regions. Field observations and laboratory investigations were carried out to characterize the surface soils of the Avonlea badlands in southern Saskatchewan, Canada, which is currently experiencing a rapid development in infrastructure. Three distinct surface sediments were identified: an upper slope of cemented sandstone, a mid-slope on weathered mudrock and a relatively flat basal pediment. Each of these soils reacts differently to rainfall events. Precipitation results in grain size reduction which, together with the consistency limits, explains the water sensitivity of the soils; the fines increased by 16% in the cemented sandstone, 78% in the weathered mudrock and 33% in the basal pediment. Erosion susceptibility was highest in the basal pediment (2% clays) followed by cemented sandstone (cementation by 6% active clays) and then by weathered mudrock (cohesion due to the 40% clay).     

Classroom furniture and anthropometric characteristics of Iranian high school students: Proposed dimensions based on anthropometric data

The study evaluated the potential mismatch between classroom furniture dimensions and anthropometric characteristics of 978 Iranian high school students (498 girls, 480 boys), aged 15-18 years. Nine anthropometric measurements (stature, sitting height, sitting shoulder height, popliteal height, hip breadth, elbow-seat height, buttock-popliteal length, buttock-knee length and thigh clearance) and five dimensions from the existing classroom furniture were measured and then compared together (using match criterion equations) to identify any potential mismatch between them. The results indicated a considerable mismatch between body dimensions of the students and the existing classroom furniture, with seat height (60.9%), seat width (54.7%) and desktop height (51.7%) being the furniture dimensions with a higher level of mismatch. The levels of mismatch varied between the high-school grade levels and between genders, indicating their special requirements and possible problems. The proposed dimensions of the classroom furniture more appropriate for the students were given. This additional information on students' anthropometry can be used by local furniture industries as a starting point for designing more appropriate furniture for school children, or used by schools to aid in furniture selection.     

Polyaniline matrix containing nickel ferromagnet

Metallic nickel (Ni) was successfully dispersed onto a polyaniline (PANI) matrix by a simple one‐step electrochemical method. Ni particles as deposited onto the polymer seemed to be much smaller compared to those deposited onto bare Pt. The size of the Ni deposits was found to be influenced by the electrolytic bath composition and potential sweep rate. The PANI matrix thus dispersed with Ni particles exhibited ferromagnetic behavior and a lower electrical conductance. The decrease in conductivity may be attributed to the partial blockage of the conductive path by the Ni particles thus embedded in the polymer matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 321–327, 2006     

Partial replacement of NR by GTR in thermoplastic elastomer based on LLDPE/NR through using reactive blending: Its effects on morphology,rheological, and mechanical properties

Attempts have been made to use different amount of ground tire rubber (GTR) powder as a partial substitute for natural rubber (NR) in thermoplastic elastomer based on linear low‐density polyethylene (LLDPE, 60 wt%) and NR (40wt%). Maleic anhydride (MA) and dicumyl peroxide (DCP) were used, during melt mixing of the compound, to modify GTR and vulcanize the rubber phases of the blends. Morphology of the blends was studied by scanning electron microscopy and rheological behavior investigated through rheomechanical spectroscopy. Mechanical properties of the blends were also measured, and the effect of GTR concentration on properties was evaluated. Obtained results showed that modification of GTR with MA and using DCP in the blends containing GTR improves the bonding between GTR and matrix. This leads to a distinctive rheological behavior and enhances tensile strength and elongation at break compared to its corresponding simple blend. It can be said that using of MA and DCP during melt mixing of thermoplastic elastomers based on LLDPE/NR containing GTR, concludes to a better dispersion of GTR and formation of morphology similar to that of a dynamic vulcanized thermoplastic elastomer, which improves interfacial bonding between phases and causes a dramatically increase in mechanical properties. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010