Al2O3/Yttria‐Stabilized Zirconia Hollow‐Fiber Membrane Incorporated with Iron Oxide for Pb(II) Removal

Removal by absorptive ceramic membranes can simultaneously absorb and separate metal ions from water. Alumina/yttria‐stabilized zirconia (Al₂O₃/YSZ) hollow‐fiber membranes, fabricated using phase inversion and sintering process, were deposited with iron oxide by an in‐situ hydrothermal process. The results showed that α‐Fe₂O₃ was produced and incorporated across the membranes. A reduction in flux was recorded with the deposition of α‐Fe₂O_3. However, it improved the adsorption capacity for heavy metal adsorption. The adsorption‐separation test demonstrated that the optimized membrane is able to completely remove Pb(II) ions after two hours.     

Yielding behaviour of thermoplastic/elastomer blends cured by gamma irradiation

Mechanical blends of thermoplastic medium density polyethylene (MDPE) and elastomeric ethylene propylene diene monomer (EPDM) have been prepared with a fixed composition of 60/40 wt%. They have been used either in their gum form or loaded with two different reinforcing fillers, high abrasion furnace (HAF) carbon black or precipitated SiO₂ (Hi Sil) of concentration 25–100 phr (parts per hundred parts of resin) with respect to the blend. Curing was achieved by gamma irradiation. Yielding properties (yield stress, yield strain and cold drawing) have been followed as a function of irradiation dose for different blend compositions. Yield stress values increased with irradiation dose and with the content of the reinforcing filler, but yield strain and cold drawing values decreased with irradiation dose and also with the filler content. The data obtained reveal that Hi Sil is more effective as a reinforcing filler, and the prepared blends are suitable for load‐bearing applications. © 2001 Society of Chemical Industry     

Source localization using TDOA and FDOA measurements based on modified cuckoo search algorithm

This paper introduces a new algorithm for solving the localization problem of moving multiple disjoint sources using time difference of arrival and frequency difference of arrival. The localization of moving sources can be considered as a least-square problem. There are many algorithms used to solve this problem such as, two-step weighted least squares, constrained total least-square and practical constrained least-square. However, most of these algorithms suffer from either slow convergence or numerical instability and don’t attain Cramer–Rao lower bound. We introduce a free-gradient algorithm called cuckoo search which avoids the slow convergence problem. The cuckoo search provides a combined global and local search method. Simulation results show that the proposed algorithm achieves better performance than other algorithms and attains Cramer–Rao lower bound.     

Evolution in the surface modification of textiles: a review

The development of technical textiles allows the introduction of new, interesting and original multi-functionalities in textiles through development of the architecture of fibres, yarns and fabrics, their morphology and surface functionalization without altering their physico-chemical proprieties. This issue of Textile Progress reports different techniques used to impart new functionalities to the surfaces of textiles during the last decade. Following a short, context-setting historical introduction, the preparatory processes which need to be applied to textile matrices to make them clean and ready for functionalization are examined prior to a comprehensive review of techniques and research related to the development of functional textiles ranging from the more-traditional techniques through to more-recent developments. The challenge now is to bring new performance features to bear whilst maintaining environmental sustainability, chemical toxicological acceptability, high performance and cost effectiveness. In this context, the review reports on developments in the use of polymerization, nanotechnologies, plasma treatment, electrospinning, microencapsulation and sol gel techniques to impart novel properties to a textile surface such as water-repellent, flame-retardant and antibacterial properties.     

Influence of branching regularity on the behavior of hyperbranched polymers in solution

A carbosilane pseudo‐dendrimer with irregular structure and degree of branching DB = 1 was synthesized and fractionated. The molar masses of the obtained fractions ranged from 5000 to 490 000 g mol^?1. The hydrodynamic and conformational properties were studied by the methods of light scattering, sedimentation‐diffusion analysis and viscometry in dilute hexane and toluene solutions. The Mark ? Kuhn ? Houwink dependences were obtained. The results for the pseudo‐dendrimer are compared with the data for the initial hyperbranched poly(diallylcarbosilane) with DB = 0.5 and carbosilane dendrimer. It is shown that the solution properties of the pseudo‐dendrimer are close to those for the irregular hyperbranched polymer and differ significantly from the dendrimer behavior. Hence, it is branching regularity rather than the degree of branching that determines the conformational and hydrodynamic properties of hyperbranched polymers with a high degree of branching DB ≥ 0.5. © 2014 Society of Chemical Industry     

Exciton-induced degradation of organic/electrode interfaces in ultraviolet organic photodetectors

We study the degradation mechanisms of ultraviolet (UV) organic photodetectors (OPDs). Contrary to expectations, we determine that the bulk of the organic layers in UV OPDs is stable under prolonged UV irradiation, showing no detectable changes in photophysical characteristics such as photoluminescence yield and exciton lifetime and thus not contributing to the observed degradation behavior of UV OPDs. However, the results show that the organic/electrode interfaces in UV OPDs, including indium tin oxide (ITO)/organic and organic/metal ones, are susceptible to UV irradiation, leading to a deterioration in both charge injection and extraction across the interfaces. The degradation of the organic/electrode interfaces in UV OPDs is essentially induced by UV-generated excitons in their vicinity and may be responsible for nearly 100% of the photo-current loss of UV OPDs. Approaches for improving the photo-stability of organic/electrode interfaces, and thus the lifetime of UV OPDs, are also investigated. We demonstrate that the use of thin (∼0.5 nm) interfacial layers such as lithium acetylacetonate at organic/metal interfaces can significantly reduce the interfacial degradation, and the use of appropriate hole transport materials such as N,N′-bis (naphthalen-1-yl)-N,N′-bis(phenyl) benzidine at ITO/organic interfaces can greatly improve the interfacial photo-stability.     

Generalised rate N/(N+1) codes

A generalised construction of rate M(N+1) run-length limited codes is presented. The (d, k, l, r) constraints are (0, N/4+1, N/8: N/8). Encoding and decoding based on the use of multiple pivot bits are described. The encoding and decoding are systematic enough to allow the writing of software to generate efficient logic equations for different N. The logic equations can be further minimised using an automatic synthesis tool     

Recovery and reutilisation of copper from metal hydroxide sludges

Sludges generated from electroplating wastewaters contain high concentrations of metals. Studies have confirmed that the concentrations of several metals in the sludge exceed that of those found in natural ores. A very good example is in the case of copper. The natural copper ore contains less than 1% of copper, whereas copper precipitate sludges from the electroplating industry may have an average of 5–10% of copper. Thus, they are one of the largest sources of untapped metal-bearing secondary materials amenable to metals recovery. In Malaysia, most of these metal-bearing sludges are disposed in specially engineering landfills, as many of them do not have the proper incentives and recovery technology. Very less metal recovery is being carried out, and there seems to be a huge waste in these valuable metal resources. With regards to that, an experimental study was carried out to develop and optimise a method of copper recovery from metal hydroxide sludges. Sludge samples containing high concentrations of copper were obtained from a local electroplating plant for the study. A procedure based upon mineral acid leaching or solubilisation was carried out. Two different types of acids, hydrochloric acid (HCl) and sulphuric acid (H₂SO₄) were used to compare the extractability of copper. Experiments were conducted at various acid concentrations and temperatures to determine the maximum amount of copper recoverable. From the results obtained, maximum copper (95%) was solubilised using H₂SO₄ of 10 M at temperature 110°C, for a leaching period of 4 h. These copper concentrated solutions were then heated and crystallised to form CuSO₄ crystals. These crystals were then washed with water and purified. They can be then further treated and reutilised in the metallurgical industry. This study introduces a sustainable method of utilising an electroplating sludge containing valuable metals.     

Bezier surface/surface intersection

The computational requirements and accuracy of two methods for finding the intersection of Bezier surfaces are examined. In both methods, the existence of an intersection curve is confirmed by using the convex hull property of such surfaces. The first method evaluates the intersection by recursive subdivision of two patches with overlapping hulls. The second method detects a point on the intersection curve and then incrementally traces the intersection in the parametric spaces of the two surfaces. With both methods, the intersection of a pair of first-order planar patches must be solved analytically. The intersection is approximated by first-order Bezier patches in the first case and by planar triangles in the second. Overall, the method of incremental tracing is shown to give more accurate results than the method of recursive subdivision