Differentiation of Mechanically and Chemically Extracted Hazelnut Oils Based on their Sterol and Wax Profiles

The sterol and wax content of solvent extracted (SEHO) and cold pressed hazelnut oils (CPHO) were compared. A total of 48 samples from 19 hazelnut varieties were collected for two successive crop years from four different geographical districts in Turkey. Hazelnuts were processed to oil with a laboratory scale press, than the remaining oil in cake was extracted with n‐hexane. CPHO and SEHO were evaluated for their wax, sterol and squalene contents. Results showed that sterol, squalene and wax contents of all individual cultivars were higher in SEHO than those of CPHO, indicating the higher solubility of these compounds in solvent. Total sterol contents ranged between 1088.56 (Kargalak)—1609.39 mg/kg (Mincane) for CPHO and 1590.86 (Çak?ldak)—2897.26 mg/kg (Mincane) for SEHO. Hazelnut oils were found to be richer of C36‐38 esters than C40‐46 group. Total wax content was between 24.19 (Kargalak)—94.58 mg/kg (Ku?) for CPHO and 81.46 (Kargalak)—160.92 mg/kg (Akçakoca) for SEHO. The squalene amounts of the samples obtained by hexane extraction were between 499.75 (Allahverdi)—885.36 mg/kg (Cavcava), while it varied between 288.55 (Kargalak)—647.68 mg/kg (Mincane) in cold pressed oils. Significant and obvious variations between SEHO and CPHO were verified by principal component and hierarchical cluster analysis. Geographical discrimination was also achieved by discriminant analysis.     

Spectroscopic studies of sol–gel grown CdS nanocrystalline thin films for optoelectronic devices

CdS is one of the highly photosensitive candidate of II–VI group semiconductor material. Therefore CdS has variety of applications in optoelectronic devices. In this paper, we have fabricated CdS nanocrystalline thin film on ultrasonically cleaned glass substrates using the sol–gel spin coating method. The structural and surface morphologies of the CdS thin film were investigated by X-ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) respectively. The surface morphology of thin films showed that the well covered substrate is without cracks, voids and hole. The round shape particle has been observed in SEM micrographs. The particles sizes of CdS nanocrystals from SEM were estimated to be～10–12 nm. Spectroscopic properties of thin films were investigated using the UV–vis spectroscopy, Photoluminescence and Raman spectroscopy. The optical band gap of the CdS thin film was estimated by UV–vis spectroscopy. The average transmittance of CdS thin film in the visible region of solar spectrum found to be～85%. Optical band gap of CdS thin film was calculated from transmittance spectrum ～2.71 eV which is higher than bulk CdS (2.40 eV) material. This confirms the blue shifting in band edge of CdS nanocrystalline thin films. PL spectrum of thin films showed that the fundamental band edge emission peak centred at 459 nm also recall as green band emission.     

SnS thin-films by RF sputtering at room temperature

Tin monosulfide (SnS) is of interest as a potential solar cell absorber material. We present a preliminary investigation of the effects of sputtering conditions on SnS thin-film structural, optical, and electronic properties. Films were RF sputtered from an SnS target using an argon plasma. Resistivity, stoichiometry, phase, grain size and shape, bandgap, and optical absorption coefficient can be varied by modifying argon pressure for a fixed deposition time. Most films have an indirect bandgap in the range of 1.08-1.18 eV. XRD patterns confirmed the films as mostly crystalline, and grain morphology was examined using profile and surface SEM images.     

Correlation Between Triplet–Triplet Annihilation and Electroluminescence Efficiency in Doped Fluorescent Organic Light‐Emitting Devices

Triplet–triplet annihilation (TTA) is studied in a wide range of fluorescent host:guest emitter systems used in organic light‐emitting devices (OLEDs). Strong TTA is observed in host:guest systems in which the dopant has a limited charge‐trapping capability. On the other hand, systems in which the dopant can efficiently trap charges show insignificant TTA, an effect that is due, in part, to the efficient quenching of triplet excitons by the trapped charges. Fluorescent host:guest systems with the strongest TTA are found to give the highest OLED electroluminescence efficiency, a phenomenon attributed to the role of TTA in converting triplet excitons into additional singlet excitons, thus appreciably contributing to the light output of OLEDs. The results shed light on and give direct evidence for the phenomena behind the recently reported very high efficiencies attainable in fluorescent host:guest OLEDs with quantum efficiencies exceeding the classical 25% theoretical limit.     

Multiple responses analysis and modeling of Fenton process for treatment of high strength landfill leachate

Landfill leachate is one of the most recalcitrant wastes for biotreatment and can be considered a potential source of contamination to surface and groundwater ecosystems. In the present study, Fenton oxidation was employed for degradation of stabilized landfill leachate. Response surface methodology was applied to analyze, model and optimize the process parameters, i.e. pH and reaction time as well as the initial concentrations of hydrogen peroxide and ferrous ion. Analysis of variance showed that good coefficients of determination were obtained (R2 > 0.99), thus ensuring satisfactory agreement of the second-order regression model with the experimental data. The results indicated that, pH and its quadratic effects were the main factors influencing Fenton oxidation. Furthermore, antagonistic effects between pH and other variables were observed. The optimum H2O2 concentration, Fe(II) concentration, pH and reaction time were 0.033 mol/L, 0.011 mol/L, 3 and 145 min, respectively, with 58.3% COD, 79.0% color and 82.1% iron removals.     

Removal of chromium (VI) from aqueous solution using treated oil palm fibre

This study proposed an oil palm by-product as a low-cost adsorbent for the removal of hexavalent chromium [Cr (VI)] from aqueous solution. Adsorption of Cr (VI) by sulphuric acid and heat-treated oil palm fibre was conducted using batch tests. The influence of pH, contact time, initial chromium concentration and adsorbent dosage on the removal of Cr (VI) from the solutions was investigated. The optimum initial pH for maximum uptake of Cr (VI) from aqueous solution was found to be 1.5. The removal efficiency was found to correlate with the initial Cr (VI) concentration, adsorbent dosage as well as the contact time between Cr (VI) and the adsorbent. The adsorption kinetics tested with pseudo first order and pseudo second order models yielded high R(2) values from 0.9254 to 0.9870 and from 0.9936 to 0.9998, respectively. The analysis of variance (ANOVA) showed significant difference between the R(2) values of the two models at 99% confidence level. The Freundlich isotherm (R(2)=0.8778) described Cr (VI) adsorption slightly better than the Langmuir isotherm (R(2)=0.8715). Difficulty in desorption of Cr (VI) suggests the suitability of treated oil palm fibre as a single-use adsorbent for Cr (VI) removal from aqueous solution.     

Natural antimicrobial/antioxidant agents in meat and poultry products as well as fruits and vegetables: A review

Synthetic preservatives are widely used by the food industry to control the growth of spoilage and pathogenic microorganisms and to inhibit the process of lipid oxidation extending the shelf-life, quality and safety of food products. However, consumer's preference for natural food additives and concern regarding the safety of synthetic preservatives prompted the food industry to look for natural alternatives. Natural antimicrobials, including plant extracts and their essential oils, enzymes, peptides, bacteriocins, bacteriophages, and fermented ingredients have all been shown to have the potential for use as alternatives to chemical antimicrobials. Some spices, herbs and other plant extracts were also reported to be strong antioxidants. The antimicrobial/antioxidant activities of some plant extracts and/or their essential oils are mainly due to the presence of some major bioactive compounds, including phenolic acids, terpenes, aldehydes, and flavonoids. The proposed mechanisms of action of these natural preservatives are reported. An overview of the research done on the direct incorporation of natural preservatives agents into meat and poultry products as well as fruit and vegetables to extend their shelf-life is presented. The development of edible packaging materials containing natural preservatives is growing and their applications in selected food products are also presented in this review.     

Evolution in the surface modification of textiles: a review

The development of technical textiles allows the introduction of new, interesting and original multi-functionalities in textiles through development of the architecture of fibres, yarns and fabrics, their morphology and surface functionalization without altering their physico-chemical proprieties. This issue of Textile Progress reports different techniques used to impart new functionalities to the surfaces of textiles during the last decade. Following a short, context-setting historical introduction, the preparatory processes which need to be applied to textile matrices to make them clean and ready for functionalization are examined prior to a comprehensive review of techniques and research related to the development of functional textiles ranging from the more-traditional techniques through to more-recent developments. The challenge now is to bring new performance features to bear whilst maintaining environmental sustainability, chemical toxicological acceptability, high performance and cost effectiveness. In this context, the review reports on developments in the use of polymerization, nanotechnologies, plasma treatment, electrospinning, microencapsulation and sol gel techniques to impart novel properties to a textile surface such as water-repellent, flame-retardant and antibacterial properties.     

Full-Scale Test of Continuity Diaphragms in Skewed Concrete Bridge Girders

Continuity diaphragms used in prestressed girder bridges on skewed bents have caused difficulties in detailing and construction. The results of the field verification for the effectiveness of continuity diaphragms for skewed, continuous, and prestressed concrete girder bridges are presented. The current design concept and bridge parameters that were considered include skew angle and the ratio of beam spacing to span (aspect ratio). A prestressed concrete bridge with continuity diaphragms and a skewed angle of 48° was selected for full-scale test by a team of engineers from Louisiana Department of Transportation and Development and the Federal Highway Administration. The live load tests performed with a comprehensive instrumentation plan provided a fundamental understanding of the load transfer mechanism through these diaphragms. The findings indicated that the effects of the continuity diaphragms were negligible and they can be eliminated. The superstructure of the bridge could be designed with link slab. Thus, the bridge deck would provide the continuity over the support, improve the riding quality, enhance the structural redundancy, and reduce the expansion joint installation and maintenance costs.