Investigation of pedestrian crashes on two-way two-lane rural roads in Ethiopia

Understanding pedestrian crash causes and contributing factors in developing countries is critically important as they account for about 55% of all traffic crashes. Not surprisingly, considerable attention in the literature has been paid to road traffic crash prediction models and methodologies in developing countries of late. Despite this interest, there are significant challenges confronting safety managers in developing countries. For example, in spite of the prominence of pedestrian crashes occurring on two-way two-lane rural roads, it has proven difficult to develop pedestrian crash prediction models due to a lack of both traffic and pedestrian exposure data. This general lack of available data has further hampered identification of pedestrian crash causes and subsequent estimation of pedestrian safety performance functions. The challenges are similar across developing nations, where little is known about the relationship between pedestrian crashes, traffic flow, and road environment variables on rural two-way roads, and where unique predictor variables may be needed to capture the unique crash risk circumstances. This paper describes pedestrian crash safety performance functions for two-way two-lane rural roads in Ethiopia as a function of traffic flow, pedestrian flows, and road geometry characteristics. In particular, random parameter negative binomial model was used to investigate pedestrian crashes. The models and their interpretations make important contributions to road crash analysis and prevention in developing countries. They also assist in the identification of the contributing factors to pedestrian crashes, with the intent to identify potential design and operational improvements.     

A novel approach for extracting cellulose nanofibers from lignocellulosic biomass by ball milling combined with chemical treatment

Cellulose nanofibers (CNFs) were isolated from kenaf fibers and wheat straw by formic acid (FA)/acetic acid (AA), peroxyformic acid (PFA)/peroxyacetic acid (PAA), hydrogen peroxide (H₂O₂) treatment; and subsequently through ball milling treatment. Characterization of extracted cellulose and cellulose nanofibers was carried out through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), and thermogravimetric analysis (TGA). TEM images showed that extracted cellulose nanofibers had diameter in the range of 8–100 nm. FTIR and XRD results implied that hemicellulose and lignin were mostly removed from lignocellulosic biomass with an increase in crystallinity, and isolation of cellulose nanofibers was successful. The TGA results showed that decomposition temperature of cellulose nanofibers increased by about 27°C when compared with that of untreated lignocellulosic biomass. No significant change was observed in the decomposition temperature of bleached celluloses after ball milling. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42990.     

Aloe vera gel: a new thickening agent for pigment printing

An attempt was made to print cotton fabric with pigments using a new thickening agent based on Aloe vera gel in combination with sodium alginate. The results were compared with the standard conventional printing recipe containing synthetic thickener, and a favourable effect of Aloe vera introduction was achieved. The results show that the properties of the printed fabric (sharpness, colour yield, overall fastness properties, softness, and water vapour transmission) are dependent on the percentage of Aloe vera gel in the thickener combination, the concentration of printing auxiliaries, and the curing conditions. Optimal printing properties were achieved by using a printing paste containing 80% Aloe vera/20% sodium alginate (700 g kg^?1), pigment (50 g kg^?1), binder (145 g kg^?1), fixer (10 g kg^?1), and ammonium sulfate (5 g kg^?1), followed by drying at 85 °C for 5 min and curing at 150 °C for 3 min. The sample printed with the new recipe showed superior rubbing fastness and handle properties, with a slightly lower colour yield, when compared with the sample printed with synthetic thickener. Finally, economic issues arising from synthetic thickener substitution are highlighted.     

Optimization of algal lipid extraction by mixture of ethyl acetate and ethanol via response surface methodology for biodiesel production

The effects of extraction time, extraction temperature, solvent to biomass ratio and solvent composition on lipid yield from lyophilized Chlorococcum sp. biomass using a mixture of ethyl acetate and ethanol (EAE), a new proposed solvent, were studied. Subsequently, the process conditions of extraction by EAE were optimized using Box-Behnken design (BBD). The results revealed that the extraction temperature had the greatest effect on lipid extraction efficiency, followed by volume ratio of ethyl acetate to ethanol (EA/E) and extraction time. The largest lipid extraction yield of 15.74% was obtained under the following extraction conditions: 40mL solvents per gram of biomass for 270 min with gentle stirring at 80 °C by EAE with an EA/E of 1.0. Furthermore, palmitic acid, stearic acid, oleic acid, and linoleic acid were the most abundant fatty acids in the lipids extracted, indicating the great potential of the proposed lipid extraction procedure for microalgae-based biodiesel production.     

Microbial fuel cell-based sensor for Enterobacter sp. KBH6958 activity monitoring during hydrogen production: the effects of pH and glucose concentration

Journal of Applied Electrochemistry - A microbial fuel cell (MFC) is an electricity-generating device utilising electrochemically active microorganisms as biocatalysts. Using MFC as a biosensor to...     

Microwave Dehydration of Borax: Characterization,Dehydration Kinetics,and Modelling

Glass Physics and Chemistry - In the present study, borax (Na2B4O7·10H2O) was dehydrated using microwave radiation and the dehydration rate curves were calculated. The kinetic parameters and...