Organizational determinants of IT adoption in the pharmaceutical distribution sector

The aim of this paper is to propose new organizational factors that might explain the differences in the extent and the speed of IT adoption. With this in mind, we carried out an analysis of 16 cases in the pharmaceutical distribution sector in Spain. The results indicate that there are certain intangible assets that favour the introduction and development of IT. Among these are a frank and fluid communication between departments and members of the organization, low levels of conflict, the explicit support of top management towards IT adoption and learning and creative skills of IT-staff. In addition to these factors, we found others that we propose as catalysts of IT adoption. Among these we might mention the special relationship between the member-clients and the company in the case of cooperative firms.     

Interfacial effects of surface-active agents under zinc pressure leach conditions

Liquid sulfur-zinc sulfate solution interfacial tensions and liquid sulfur-zinc sulfate solution-zinc sulfide (marmatite) contact angles were measured in the absence and presence of surface-active agents. Interfacial tensions measured varied between 54 ± 1 mN/m in the surfactant-free system and 20 ± 1 mN/m in the presence of a surfactant. The liquid sulfur-zinc sulfide mineral-zinc sulfate solution contact angle varies between 80 ± 5 deg, in the absence of any surfactant, and 148 ± 5 deg, depending on the surfactant used. The surface-active agents were used as dispersants for sulfur in bench-scale zinc pressure-leaching experiments. The observed extent of zinc extraction depends on the surfactant and varies from 40 to 96 pct.     

Calcification of subcutaneously implanted collagens in relation to cytotoxicity,cellular interactions and crosslinking

In general, calcification of biomaterials occurs through an interaction of host and implanted material factors, but up to now the real origin of pathologic calcification is unknown. In this study we aimed to investigate incidence of calcification of (crosslinked) dermal sheep collagens (DSCs) with respect to their specific properties, during subcutaneous implantation in rats. Three types of DSCs were commercially obtained: non-crosslinked DSC (NDSC), and DSC crosslinked with glutaraldehyde (GDSC) and hexamethylenediisocyanate (HDSC). NDSC, HDSC and GDSC were (enzymatically) tissue culture pretreated to eliminate their cytotoxic products. Beside this, crosslinking methods were modified to optimize mechanical properties and to decrease cytotoxicity, which resulted in HDSC^* and GDSC^*. Furthermore, DSC was crosslinked by activation of the carboxylic groups, i.e. by means of acyl azide and carbodiimide, resulting in AaDSC and CDSC, respectively. After implantation of HDSCs and GDSCs a relation between cytotoxicity and calcification of crosslinked DSC could be made. No relation was found between cellular infiltration of DSCs and calcification. However, from the use of different types and modification of crosslinking methods it might be concluded that calcification is mainly related to stable crosslinks, i.e. to the chemical properties of the obtained material.     

Analysis and observation of backscatter-induced crosstalk in a 2-DFDM fiber gyro system

The modulation characteristics of first-order backscatter-induced crosstalk noise in a 2-D frequency-division-multiplexed fiber gyro system are analyzed and experimental results presented. The noise can be reduced from 5°/h to 0.2°/h (0.25 NEB) by proper choice of modulation depth and/or frequency     

A histological study on polyactive® for the prevention of peridural adhesions after spinal surgery: an experimental study in dogs with a 3 months follow-up

In the present study the potential of Polyactive^® bilayer sheets in the prevention of scar tissue formation after spinal surgery was investigated. Eight adult beagle dogs underwent 3 laminectomies at three levels (L2, L4 and L6). According to a randomized implantation schedule a Polyactive^® sheet or autogenous fat graft was placed in the defect. The third site served as a control without implant. After 4 or 12 weeks (4 dogs per period) the dogs were sacrificed and histological sections were prepared. The Polyactive^® treated defects showed partial closure by newly formed bone. The Polyactive^® was encapsuled by a thin fibrous tissue layer. Ventral to the defect, dense fibrous tissue was present which was separated from the dura by the Polyactive^® sheet in all cases. In some cases fibrous tissue was present between the implant capsule and the dura. In the fat graft group there were no signs of closure of the defect but most sites showed fibrous tissue at the edges of the graft, which was in 4 sites continous with the dura mater. Fibrosis and degeneration of the fat grafts were seen. All control defects showed partial closure by newly formed bone, and ventral to the defect extensive fibrous tissue, which was in 50% continous with the dura mater. Other sections showed loose connective tissue in contact with the dura mater. It is concluded that Polyactive^® has a potential as a mechanical barrier in the prevention of adhesions between the dorsal spinal muscles and the dura mater.     

Sialons — Promising Refractory and Ceramic Materials

Available data on the chemical composition and structure of sialon phases are reviewed. Properties of the phases and their potential applications are discussed.     

Dynamics Modelling of Hexaslides using the Decoupled Natural Orthogonal Complement Matrices

In this paper, dynamic model of a class of parallel systems, namely, the hexaslides, is proposed. The model developed is based on the concept the decoupled natural orthogonal complement (DeNOC) matrices, introduced elsewhere. The dynamic model of hexslides, though complex due to the existence of multi-loop kinematic chains, is required for actuator power estimation, computed-torque control, optimum tool trajectory generation, etc. The use of DeNOC offers many physical interpretations, recursive algorithms, and parallel computations. Using the proposed dynamic model, a parallel inverse dynamics algorithm has been presented to compute the actuator forces. This is useful to choose suitable motors for an application. An illustration is provided using an existing machine tool based on hexaslides, namely, the HexaM, while it is carrying out a circular contouring. Secondly, the effect of leg and slider inertias is also studied, which clearly suggests that neither of these can be neglected while finding the actuator forces.