Vagal regulation during bottle feeding in low-birthweight neonates: support for the gustatory-vagal hypothesis

BACKGROUND AND PURPOSE: Linear accelerators equipped with multileaf collimators (MLCs) are becoming more common and are widely available from most commercial manufacturers. There is a need to ensure they retain their commissioning specification using a preventative maintenance and quality control (QC) programme. This paper considers the design criteria of the Philips MLC which are important to the production of a comprehensive quality control programme. MATERIALS AND METHODS: The specific QC problems related to MLCs are identified as the positional accuracy of the leaves and their relationship to the back-up collimators, leakage considerations, the relationship of X-ray to light field and the influence of gravity on the positioning and leakage characteristics of the leaves. These problems are considered in relation to the general design considerations of the MLC, and methods of performing routine quality control checks are discussed. RESULTS AND CONCLUSIONS: The introduction of MLCs into clinical use results in new QC procedures being developed but it can be concluded that for the Philips MLC only an extra 30 min of QC time is needed per month and that its use has added little to the general down-time of this department.     

Biologically active amphiphilic derivatives of chitosan

Amphiphilic N-derivatives of chitosan containing C₁₂ alkyl and carboxyl groups were obtained. It was shown that the compounds obtained have fungicidal activity and form intermolecular associates in solutions. __________ Translated from Khimicheskie Volokna, No. 6, pp. 57–58, November–December, 2005.     

Synthesis of imidazo[2,1-b]thiazoles through the reaction of thiohydantoins and α-bromoketones

Imidazo-fused heterocycles are used as anticancer agents. In this study, some novel imidazo[2,1-b]thiazoles were synthesized from thiohydantoins and α-bromoketones in good yields. This method has the advantages of simple operation, high yields, and mild reaction conditions and uses less toxic and low-cost chemical reagents.     

Efficiently Detecting Metallodrug–Protein Adducts: Ion Trap versus Time‐of‐Flight Mass Analyzers

Modern mass spectrometry techniques have increasingly found use in studies on the binding of anticancer metallodrugs to potential cellular targets. In this context, investigations on the detection efficiency of adduct formation between antiproliferative Ru(arene) complexes and proteins in dependence of the mass analyzer used in the electrospray ionization (ESI) mass spectrometer are presented. The potential in detecting adducts between the metal center and the protein was found to be dependent on the mass analyzer and the denticity of the metal–protein interaction. This might be related to the design of the mass analyzers with different conditions in the ion travelling pathways, which affects adducts when the protein acts as a monodentate ligand more highly than in cases when the protein is a multidentate ligand. This could also impact the biological activity and indicate different pathways of metabolism of biomolecule adducts.     

Lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan as a new strategy for oral delivery of insulin: in vitro,ex vivo and in vivo characterizations

Objective: The purpose of this research was the development, in vitro, ex vivo and in vivo characterization of lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan.

Methods: Insulin nanoparticles were prepared from methylated N-(4-N,N-dimethylaminobenzyl), methylated N-(4 pyridinyl) and methylated N-(benzyl). Insulin nanoparticles containing non-modified chitosan and also trimethyl chiotsan (TMC) were also prepared as control. The effects of the freeze-drying process on physico-chemical properties of nanoparticles were investigated. The release of insulin from the nanoparticles was studied in vitro. The mechanism of the release of insulin from different types of nanoparticles was determined using curve fitting. The secondary structure of the insulin released from the nanoparticles was analyzed using circular dichroism and the cell cytotoxicity of nanoparticles on a Caco-2 cell line was determined. Ex vivo studies were performed on excised rat jejunum using Frantz diffusion cells. In vivo studies were performed on diabetic male Wistar rats and blood glucose level and insulin serum concentration were determined.

Results: Optimized nanoparticles with proper physico-chemical properties were obtained. The lyophilization process was found to cause a decrease in zeta potential and an increase in PdI as well as and a decrease in entrapment efficiency (EE%) and loading efficiency (LE%) but conservation in size of nanoparticles. Atomic force microscopy (AFM) images showed non-aggregated, stable and spherical to sub-spherical nanoparticles. The in vitro release study revealed higher release rates for lyophilized compared to non-lyophilized nanoparticles. Cytotoxicity studies on Caco-2 cells revealed no significant cytotoxicity for prepared nanoparticles after 3-h post-incubation but did show the concentration-dependent cytotoxicity after 24?h. The percentage of cumulative insulin determined from ex vivo studies was significantly higher in nanoparticles prepared from quaternized aromatic derivatives of chitosan. In vivo data showed significantly higher insulin intestinal absorption in nanoparticles prepared from methylated N-(4-N, N-dimethylaminobenzyl) chitosan nanoparticles compared to trimethyl chitosan.

Conclusion: These data obtained demonstrated that as the result of optimized physico-chemical properties, drug release rate, cytotoxicity profile, ex vivo permeation enhancement and increased in vivo absorption, nanoparticles prepared from N-aryl derivatives of chitosan can be considered as valuable method for the oral delivery of insulin.     

Design,characterization and ex vivo evaluation of chitosan film integrating of insulin nanoparticles composed of thiolated chitosan derivative for buccal delivery of insulin

The purpose of this study is to optimize and characterize of chitosan buccal film for delivery of insulin nanoparticles that were prepared from thiolated dimethyl ethyl chitosan (DMEC-Cys). Insulin nanoparticles composed of chitosan and dimethyl ethyl chitosan (DMEC) were also prepared as control groups. The release of insulin from nanoparticles was studied in vitro in phosphate buffer solution (PBS) pH 7.4. Optimization of chitosan buccal films has been carried out by central composite design (CCD) response surface methodology. Independent variables were different amounts of chitosan and glycerol as mucoadhesive polymer and plasticizer, respectively. Tensile strength and bioadhesion force were considered as dependent variables. Ex vivo study was performed on excised rabbit buccal mucosa. Optimized insulin nanoparticles were obtained with acceptable physicochemical properties. In vitro release profile of insulin nanoparticles revealed that the highest solubility of nanoparticles in aqueous media is related to DMEC-Cys nanoparticles. CCD showed that optimized buccal film containing 4% chitosan and 10% glycerol has 5.81?kg/mm² tensile strength and 2.47?N bioadhesion forces. Results of ex vivo study demonstrated that permeation of insulin nanoparticles through rabbit buccal mucosa is 17.1, 67.89 and 97.18% for chitosan, DMEC and DMEC-Cys nanoparticles, respectively. Thus, this study suggests that DMEC-Cys can act as a potential enhancer for buccal delivery of insulin.     

Spatial analyses of wildlife contact networks

Datasets from which wildlife contact networks of epidemiological importance can be inferred are becoming increasingly common. A largely unexplored facet of these data is finding evidence of spatial constraints on who has contact with whom, despite theoretical epidemiologists having long realized spatial constraints can play a critical role in infectious disease dynamics. A graph dissimilarity measure is proposed to quantify how close an observed contact network is to being purely spatial whereby its edges are completely determined by the spatial arrangement of its nodes. Statistical techniques are also used to fit a series of mechanistic models for contact rates between individuals to the binary edge data representing presence or absence of observed contact. These are the basis for a second measure that quantifies the extent to which contacts are being mediated by distance. We apply these methods to a set of 128 contact networks of field voles (Microtus agrestis) inferred from mark–recapture data collected over 7 years and from four sites. Large fluctuations in vole abundance allow us to demonstrate that the networks become increasingly similar to spatial proximity graphs as vole density increases. The average number of contacts, , was (i) positively correlated with vole density across the range of observed densities and (ii) for two of the four sites a saturating function of density. The implications for pathogen persistence in wildlife may be that persistence is relatively unaffected by fluctuations in host density because at low density is low but hosts move more freely, and at high density is high but transmission is hampered by local build-up of infected or recovered animals.     

A variable neighborhood binary particle swarm algorithm for cell layout problem

In this paper, a new mathematical model is proposed for inter- and intra-cell layout problem in cellular manufacturing system. A binary particle swarm optimization algorithm with a new heuristic approach for satisfying the constraints of model is implemented to solve the proposed model. Also, a variable neighborhood search is applied for finding better local optimal solutions. Some sensitivity analyses are carried out to find the best values of PSO parameters. To prove the efficiency of the proposed algorithm, various numerical examples in small, medium, and large sizes in both perfect geometric shapes and random placements are generated and solved.     

Effect of persulfate on the oxidation of benzotriazole and humic acid by e-beam irradiation

These days, the use of persulfate in advanced oxidation processes (AOPs) has gained more attention as an emerging clean and efficient technology to degrade the organic pollutants. The objective of this study was to investigate the effect of the addition of persulfate on the oxidation of benzotriazole (BT) and humic acids (HAs) by irradiation. The degradation of BT (3.7 μM) was followed under the influence of persulfate addition (200-500 μM) in combination with a fixed radiation dose (15 Gy) in the absence and presence of HA (5 and 20mg/L) in deionized water. The main results obtained in this study on the degradation of BT in the presence of HA showed a different effect of S(2)O(8)(2-) addition during irradiation, depending on whether HA are oxidized or not-oxidized. (1) An inhibitory effect of S(2)O(8)(2-) was observed in the presence of non-oxidized HA. (2) The removal of BT was generally more important during irradiation in the presence of S(2)O(8)(2-) when HA is pre-oxidized. This could be explained by the different structures of humic acids. These differences of structures of HA were identified by physico-chemical parameters such as the absorbance in the UV (254 nm), the fluorescence and the SUVA measurement.     

Influence of top‐section design and draft‐tube height on the performance of airlift bioreactors containing water‐in‐oil microemulsion

The mixing and mass transfer characteristics of draft‐tube airlift bioreactors (DTAB) for a water‐in‐kerosene microemulsion, as a cold model of petroleum biodesulfurization, were studied. Incomplete gas disengagement at the top‐section of the DTAB and hence high gas recirculation were obtained with the microemulsion system for all the top‐section configurations employed in the present study especially at the high airflow rates. The ratio (S) of the volumes of the riser and the downcomer to the top‐section together with the gas disengagement abilities of the gas separator were both found to affect the mixing performance of the DTAB employed for the microemulsion system. Increase in the draft‐tube height resulted in significant increase in the mixing time (t_m) and a slight increase in the overall volumetric oxygen transfer coefficient (k_La). Increase in the diameter of the top‐section and the height of the liquid above the draft‐tube led to a decrease in k_La, the latter effect being less prominent. New correlations were developed that predicted the mixing time and oxygen transfer coefficients obtained in the present work with reasonable accuracy. Copyright © 2004 Society of Chemical Industry