Growth and characterization of diamond particles,diamond films,and CNT-diamond composite films deposited simultaneously by hot filament CVD

It is important to understand the growth of CNT-diamond composite films in order to improve the inter-link between two carbon allotropes, and, in turn, their physical properties for field emission and other applications. Isolated diamond particles, continuous diamond thin films, and thin films of carbon nanotubes (CNTs) having non-uniformly distributed diamond particles (CNT-diamond composite films) were simultaneously grown on unseeded, seeded, and catalyst pre-treated substrates, respectively, using a large-area multi-wafer-scale hot filament chemical vapor deposition. Films were deposited for four different growth durations at a given deposition condition. The changes in surface morphology and growth behavior of diamond particles with growth duration were investigated ex situ using field emission scanning electron microscopy and 2D confocal Raman depth spectral imaging, respectively. A surface morphological transition from faceted microcrystalline nature to nanocrystalline nature was observed as a function of growth duration in the case of isolated diamond particles grown on both unseeded and catalyst pre-treated substrates. However, such a morphological transition was not observed on the simultaneously grown continuous diamond thin films on seeded substrates. 2D confocal Raman depth spectral imaging of diamond particles showed that the local growth of CNTs did not affect the growth behavior of neighboring diamond particles on catalyst pre-treated substrates. These observations emphasize the importance of surface chemical reactions at the growth site in deciding sp² or sp³ carbon growth and the final grain size of the diamond films.     

Applicability of Field Plate in Double Channel GaN HEMT for Radio-Frequency and Power-Electronic Applications

Silicon - In the present communication, for the first time, applicability of Field Plate (FP) for Double Channel (DC) AlGaN/GaNHEMT is demonstrated. Impact of design space parameters such as field...     

Investigation on DC/RF Performance of LG = 19 nm Heterogeneous Integrated Ga0.15In0.85As/InAs/Ga0.15In0.85As Composite Channel InP HEMT on Silicon Substrate for Future Beyond 5G and Quantum Computing Applications

Silicon - The RF/DC performances of LG = 19 nm heterogeneous integrated Ga0.15In0.85As/InAs/Ga0.15In0.85As composite channel based InP HEMT (high electron mobility transistor)...     

Gelatin‐carbohydrate phase‐separated hydrogels as bioactive carriers in vaginal delivery: Preparation and physical characterizations

The current study focuses on the alteration of properties of the gelatin hydrogels using polysaccharides (e.g., maltodextrin, dextran, and sodium carboxymethyl cellulose) for probable use in vaginal delivery of antimicrobials. The hydrogels were prepared by varying the proportions of gelatin and polysaccharides and were characterized by microscopy, mechanical testing, and impedance spectroscopy. Metronidazole (MZ), drug of choice for the treatment of bacterial vaginosis, was incorporated within the hydrogels. In vitro release studies of MZ from the hydrogels was studied in‐depth using modified Franz's diffusion cell. Antimicrobial efficiency of the MZ‐loaded hydrogels was tested against E. coli and B. subtilis. The results suggested that the incorporation of polysaccharides resulted in the phase‐separated hydrogels. The properties of the hydrogels was found be suitable for vaginal delivery. The drug release and antimicrobial efficiency from the hydrogels suggested that the developed hydrogels may be used for the delivery of antimicrobials in the vaginal lumen. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40445.     

Rheological Properties of Certain Processed Rice Products

Two popular rice products, namely expanded rice and flaked rice, are prepared from parboiled rice. As about 90% dry weight of milled rice is starch, the behaviour of rice and its products reflects largely the behaviour of its starch. The above precooked rice products which undergo a high degree of thermal and/or mechanical treatment during processing have a high degree of gelatinization and display therefore properties like those of pregelatinized starch. Both expanded rice and flaked rice have high water binding capacity and cold-swelling properties. Under suitable moisture conditions they undergo retrogradation and show reduced hydration and viscosity. Normal steam-parboild rice shows much lower viscosity because of a comparatively low degree of starch gelatinization during processing and its subsequent retrogradation. Rheologically the cold slurry of these products indicates a thixotropic system demonstrating time dependent thinning. Further, a dependence on slurry concentration and degree of processing and a yield value behind a certain concentration were also apparent. The cold swelling properties of flaked rice and expanded rice show potential use of their flour as a possible subsitute for pregelatinized starch in food and other industries.     

Pesticides removal performance by low‐pressure reverse osmosis membranes

Pressure driven techniques (viz. reverse osmosis and nanofiltration) have the potentiality to remove the pesticides from water. The observations revealed that pesticides removal mostly depends upon the molecular weight (size exclusion) and hydrophobicity (log P) of the pesticides. Interfacial polymerization of m‐phenylene diamine (MPD) and trimesoyl chloride (TMC) on the polysulfone membranes impart the salt rejection property in it. It is shown that with the greater salt rejection property, the performance removal of pesticides also is in increasing trend. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3575–3579, 2006     

Multispeed tool-life tests with radioactive tools

A multispeed testing method for obtaining tool-life parameters using radioactive tools has been developed. By suitable interpolation of the instantaneous rates of absolute wear measured for a number of discrete cutting speeds, the corresponding tool-life values can be deduced in a test employing a single cutting edge. Using failure criteria based on wear-land width, crater volume and total wear volume, tool-life parameters were obtained in orthogonal cutting tests with irradiated high speed steel tools. Subsidiary experiments, including conventional tool-life testing, confirmed the validity of the multispeed method over the cutting speed range investigated.     

1.54 lm GaSb/AlGaSb multi-quantum-well monolithic laser at 77 K grown on miscut Si substrate using interfacial misfit arrays

A GaSb quantum-well (QW) laser diode grown monolithically on a 5deg miscut Si (001) substrate is presented. The III-Sb epi-structure is grown monolithically on the miscut Si substrate via a thin (50 nm) AlSb nucleation layer. The 13% lattice mismatch between AlSb and Si is accommodated by a self-assembled 2D array of interfacial misfit dislocations (IMF). The 5deg miscut geometry enables simultaneous IMF formation and anti-phase domain suppression. The 1 mm times 100 mum GaSb QW laser diode operates under pulsed conditions at 77 K with a threshold current density of 2 kA/cm² and a maximum peak power of ~20 mW. Furthermore, the device is characterised by a 9.1 Omega forward resistance and a leakage current density of 0.7 A/cm² at -5 V.     

Optimal Weld Parameters, Weld Microstructure, Mechanical Properties, and Hydrogen Absorption: An Effective Analysis

Weld bead-in-grooves were deposited on low alloy, high strength steel plates (ASTM A 517 Grade “F”) with a commercial flux-cored filler wire, Auto-MIG 420, at different welding conditions. Microstructure and mechanical properties of welds were characterized by means of optical microscopy, SEM, TEM, EPMA, microhardness measurements, tensile tests, and Charpy impact tests. Hydrogen content of weld metals in as-weld condition and after exposing in simulated service condition was measured by LECO Gas Analyzer. Microstructure of weld metals consisted primarily of lath martensite with small amount of M-A constituents (Martensite-Austenite alternating layers). For some particular welding conditions, such as higher heat input and lower preheat temperatures etc., acicular ferrite is observed with lath martensite. Welds consisting of acicular ferrite in the microstructure showed improved mechanical properties as well as lower hydrogen absorption. The study provides guidelines for selecting proper welding conditions, which results in lower propensity to absorb hydrogen during service, as well as better mechanical properties. Necessity of post-weld heat treatment processes, which is mainly performed to achieve toughness, may be reduced; consequently saving cost and time of the welding process.     

Chemical Synthesis and Characterization of Nickel Powder

The synthesis of magnetic Ni nanoparticles is being investigated by the reduction of NiO nanoparticles in the presence of hydrogen gas. In this study, nanocrystalline NiO particles have been synthesized by a homogenous carbonate precipitation method employing nickel electrolyte (NiSO₄) as the source of nickel and ammonium hydrogen carbonate as the precipitating agent. Nickel electrolyte (NiSO₄) was obtained after processing of sea nodules by the roasting-ammonia leaching-solvent extraction method. The physicochemical characterization of NiO and Ni particles, i.e., bright field image by transmission electron microscope, X-ray diffraction, scanning electron microscope, energy dispersive X-ray analysis, Fourier transform-infrared (FT-IR) study, and magnetic measurements by vibration sample magnetometer (VSM) are studied. The particles are observed to be superparamagnetic.