Spectral characteristics of vertical-cavity surface-emitting lasers with external optical feedback

The measurement of the effects of external optical feedback on the spectra of VCSELs (vertical-cavity surface-emitting lasers) is reported. It is surprising that VCSELs have a sensitivity to optical feedback comparable to that of conventional edge-emitting lasers such as DFBs despite their significantly different structures. This is because the extremely short cavity length of VCSELs negates the effects of their highly reflective output mirrors. As in edge-emitting lasers, VCSELs exhibit well-defined regimes of feedback effects in their spectra. Since optical isolators cannot be easily applied to VCSELs due to their array structure, these lasers may be most useful in applications which are not sensitive to the spectral qualities of the light source.<>     

89-GHz fT room-temperature silicon MOSFETs

The authors report the implementation of deep-submicrometer Si MOSFETs that at room temperature have a unity-current-gain cutoff frequency (f_T) of 89 GHz, for a drain-to-source bias of 1.5 V, a gate-to-source bias of 1 V, a gate oxide thickness of 40 Å, and a channel length of 0.15 μm. The fabrication procedure is mostly conventional, except for the e-beam defined gates. The speed performance is achieved through an intrinsic transit time of only 1.8 ps across the active device region     

A practical SPICE model based on the physics and characteristics of realistic single-electron transistors

A practical model for a single-electron transistor (SET) was developed based on the physical phenomena in realistic Si SETs, and implemented into a conventional circuit simulator. In the proposed model, the SET current calculated by the analytic model is combined with the parasitic MOSFET characteristics, which have been observed in many recently reported SETs formed on Si nanostructures. The SPICE simulation results were compared with the measured characteristics of the Si SETs. In terms of the bias, temperature, and size dependence of the realistic SET characteristics, an extensive comparison leads to good agreement within a reasonable level of accuracy. This result is noticeable in that a single set of model parameters was used, while considering divergent physical phenomena such as the parasitic MOSFET, the Coulomb oscillation phase shift, and the tunneling resistance modulated by the gate bias. When compared to the measured data, the accuracy of the voltage transfer characteristics of a single-electron inverter obtained from the SPICE simulation was within 15%. This new SPICE model can be applied to estimating the realistic performance of a CMOS/SET hybrid circuit or various SET logic architectures.     

ENVIRONMENTAL TOBACCO SMOKE REMOVAL CAPABILITY OF ACTIVATED CARBON

Removal of gaseous and vapor constituents of environmental tobacco smoke (ETS) by activated carbons in a packed bed arrangement was studied under dynamic conditions and was compared with that by silica gel and molecular sieve 13X. ETS is a mixture of sidestream smoke and exhaled mainstream smoke, and it consists of various organic and inorganic compounds, trace heavy metals, and particulate matters. Due to the complex nature of ETS-air mixture, its removal from indoors is a challenging task. For experimentation in a laboratory, the ETS was produced from a specially designed smoking apparatus that simulated the puffng of a cigarette by a person. Air containing ETS was passed through a bed containing about 25 grams of activated carbon at room temperature. The flow rate of air-ETS mixture through the bed was 4000 cm3/min. The relative humidity of the air was 50% and contained about 35 to 40 ppm of hydrocarbons as measured as methane-equivalent. The number of particles in the inlet air stream were in the range of 30,000 to 35,000 particles/cm3. About 60% of hydrocarbons present in ETS were removed at these operating conditions for a period of about 70 hours. Based on 15 adsorption and regeneration cycles, it was noted that the carbon bed did not loose its capacity for ETS significantly as indicated by the BET surface area and water adsorption data. At the beginning of an adsorption cycle, the carbon bed captured a significant number of particles. However, the bed rapidly lost its particle capture effciency as the experiment progressed. The number of particles in the outlet air stream was found to be the same as that of the inlet stream within five minutes.     

Protective effects of green tea extracts (polyphenon E and EGCG) on human cervical lesions

We investigated clinical efficacy of green tea extracts (polyphenon E; poly E and (-)-epigallocatechin-3-gallate [EGCG]) delivered in a form of ointment or capsule in patients with human papilloma virus (HPV) infected cervical lesions. Fifty-one patients with cervical lesions (chronic cervicitis, mild dysplasia, moderate dysplasia and severe dysplasia) were divided into four groups, as compared with 39 untreated patients as a control. Poly E ointment was applied locally to 27 patients twice a week. For oral delivery, a 200 mg of poly E or EGCG capsule was taken orally every day for eight to 12 weeks. In the study, 20 out of 27 patients (74%) under poly E ointment therapy showed a response. Six out of eight patients under poly E ointment plus poly E capsule therapy (75%) showed a response, and three out of six patients (50%) under poly E capsule therapy showed a response. Six out of 10 patients (60%) under EGCG capsule therapy showed a response. Overall, a 69% response rate (35/51) was noted for treatment with green tea extracts, as compared with a 10% response rate (4/39) in untreated controls (P<0.05). Thus, the data collected here demonstrated that green tea extracts in a form of ointment and capsule are effective for treating cervical lesions, suggesting that green tea extracts can be a potential therapy regimen for patients with HPV infected cervical lesions.     

Adaptation of drafting plotter for buried contact groove formation

Lasers (e.g. Nd-YAG) have been used extensively for groove formation both in laboratories and commercial production but the initial capital cost is high. The production throughput is also low and thus adds to the cost of the cell. To reduce cost and increase production throughput a drafting plotter has been adapted to serve as a mechanical scriber for groove formation. The adapted plotter can scribe cells in matrix form to reduce the human labour and increase the production throughput. The characterization of the scribing tips in conjunction with the plotter showed that the best yield for the scriber is obtained when the scribing tip is mounted at 78° to the stock. Of the seven characterized scribing tips, the 90° conical scriber has been found to give the same groove geometry as the laser. The application of the adapted plotter to cell fabrication did not show any significant deterioration in the electrical output parameters for the mechanically scribed cells when compared with laser scribed cells. This article reports the adaptation of the x-y table drafting plotter to form buried contact grooves.     

The material properties of sulphonated phenolic resin reinforced cement mortars

The material properties of new sulphonated phenolic resin (SP) reinforced cement mortars have been investigated. SP was found to promote the dispersion of cement particles and to interact with Ca(OH)₂. As a result, the resulting mortars exhibit better workability, more compact structure and higher compressive strength than plain mortars. The mortar with 1 wt% SP present after 28 days curing exhibits a compressive strength of 66MPa, which is about 18% higher than that of plain mortar.     

Queueing analyses of traffic access control strategies withpreemptive and nonpreemptive disciplines in wideband integrated networks

A multiserver queueing model of access control strategies for a wideband integrated services digital network (ISDN) is considered. There are two types of service requests (SRs): Type 1 SR requires b servers (basic bandwidth units, BBUs) of the c available servers, while Type 2 SR requires a single server. Both types of SRs are queuable in two separate infinite-size buffers. A Type 1 SR is allowed to seize d(⩽b) servers at first and then acquire additional servers as they become available to meet the original requirement of b servers. The arrival processes of both types of SRs are Poisson and the service times are exponentially distributed with mean b/dμ₁ and 1/μ₂ for Type 1 SR and Type 2 SR, respectively. Preemptive and nonpreemptive priority disciplines with movable boundary are analyzed using the Neuts' matrix-analytic approach. Numerical examples of the queue length distribution and the mean waiting time of the SRs are presented