Predicting heat and mass transfer to a growing, rotating preform during soot deposition in the outside vapor deposition process

During the manufacture of optical fibers using the outside vapor deposition (OVD) process, porous soot preforms are made by depositing soot onto a rotating cylindrical target from a soot-laden flame traversing along the target axis. The dominant mechanism of soot deposition in the OVD process is thermophoresis, which is the tendency of particles to migrate down the local gas temperature gradient. Accurate methods to estimate the heat and mass transfer rates from the flame to the growing preform are critical, as these rates dictate important preform characteristics. The heat and mass transfer during the OVD process are coupled due to particle thermophoresis and growth of the preform. We here present methods to predict the growth rate of a rotating preform along with the evolution of temperature profile at different radial locations within the preform for specified process parameters of flame temperature, burner traverse speed and number of burners. Sensitivity of preform temperature profile and deposition rate to each of the process parameters is presented, along with the critical discussion of our principal results.     

ITP: an image transport protocol for the Internet

Images account for a significant and growing fraction of Web downloads. The traditional approach to transporting images uses TCP, but this is overly restrictive for image data. Our analysis shows that the in-order delivery abstraction provided by a TCP-based approach prevents the receiver application from processing and rendering portions of an image when they actually arrive. Thus an image is rendered in bursts interspersed with long idle times rather than smoothly. This paper describes the design, implementation and evaluation of an image transport protocol (ITP) for image transmission over loss-prone congested or wireless networks. ITP improves user-perceived latency using application-level framing (ALF) and out-of-order application data unit (ADU) delivery, achieving significantly better interactive performance as measured by the evolution of peak signal-to-noise ratio (PSNR) with time at the receiver. ITP runs over UDP, incorporates receiver-driven selective reliability, uses a congestion manager (CM) to adapt to network congestion and is customizable for specific image formats (e.g., JPEG and JPEG2000). ITP enables a variety of new receiver post-processing algorithms such as error concealment that further improve the interactivity and responsiveness of reconstructed images. Performance experiments across a variety of loss conditions demonstrate the benefits of ITP in improving the interactivity of image downloads at the receiver     

Pebble bed-oil thermal energy storage for solar thermo-electric power systems

Results of a study to examine the operating characteristics of a 100 kWh thermal energy storage (TES) system suitable for solar thermo electric applications is described. The system chosen consisted of a pebble bed as the primary storage medium and oil as the heat transfer cum storage medium. The operating temperatures considered were between 230 and 250°C with a 20 deg C swing. A full-size unit consisting of a steel tank of volume 10 m³ with 50 mm pebbles, suitable instrumentation and facility for heating the oil was built. The important operating variables and characteristics of the system studied included the transient behaviour of the bed, namely the thermal wave front characteristics. Results of the theoretical analysis of the transient bed behaviour were compared with the experimental data on the wave front propogation characteristics and the comparisons are discussed. The uniformity of flow distribution is also examined.     

Synthesis and characterization of magnetic and fluorescent styrene co‐polymer nanofiber

F luorescent and magnetic poly(styrene) (PS) based random co‐polymer nanofiber was synthesized in a controlled manner via chemical polymerization in three steps. A fluorescent and magnetic nanohybrid {Fe₃O₄/Congored (CR)} was separately prepared and chemically grafted onto the epichlorohydrin (ECH) units of the random co‐polymer. Characterizations of the above synthesized polymers were done with the help of Fourier transform infrared (FTIR) spectroscopy, UV–visible spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, fluorescence emission spectroscopy, field emission scanning electron microscopy (FESEM), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) measurement, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and gel permeation chromatography (GPC) like analytical techniques. The FESEM results indicated that after the grafting of nanohybrid onto the random co‐polymer backbone, the polymer exhibited a nanofiber like morphology. Due to the surface functionalization and encapsulation reactions, the magnetic moment value of the nanohybrid and its nanocomposites were found to be reduced. Synthesis and characterization of magnetic and fluorescent random co‐polymer based nanofiber is the primary target of the present investigation and its application is extended to the catalysis field. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42796.     

Effect of tube diameter on two‐phase flow patterns in mini tubes

The effect of tube diameter on two‐phase flow patterns was investigated in circular tubes with inner diameters of 0.6, 1.2, 1.7, 2.6, and 3.4 mm using air and water. The gas and liquid superficial velocity ranges were 0.01–50 and 0.01–3 m/s, respectively. The gas and liquid flow rates were measured and the two‐phase flow pattern images were recorded using high‐speed CMOS camera. The flow patterns observed were dispersed bubbly, bubbly, slug, slug‐annular, wavy‐annular, stratified, and annular flows. These flow patterns were not observed in all the test diameters, but were found to be unique to particular tube diameters, confirming the effect of tube diameter on the flow pattern. The data obtained were compared to existing experimental data and flow regime transition maps which show generally reasonable overall agreement at the larger diameters, but significant differences were observed with the smaller diameter tubes.     

Thermal stability of CeO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> multilayer thin films prepared by pulsed laser deposition

Multilayers of CeO₂/ZrO₂ thin films were deposited on Si (100) substrates using pulsed laser deposition at an optimized oxygen partial pressure of 3×10⁻² mbar and at room temperature. The CeO₂ layer thickness was 10 nm, while the ZrO₂ layer thickness was varied as 10, 20 and 30 nm. CeO₂ and ZrO₂ layers were deposited alternately to obtain 25 bilayers. High temperature x-ray diffraction (HTXRD) results showed that the multilayer films had cubic ceria and tetragonal ZrO₂. Thermal expansion coefficients were calculated for CeO₂ and t-ZrO₂ and found to increase with the decrease of ZrO₂ layer thickness. The cross sectional transmission electron microscopy (XTEM) of CeO₂/ZrO₂ multilayer also indicated that ceria was found to be in cubic phase while zirconia contained predominantly tetragonal phase along with cubic phase in thermally annealed specimen.     

A dual voltage-frequency VLSI chip for image watermarking in DCT domain

In this brief, we present a new VLSI architecture that can insert invisible or visible watermarks in images in the discrete cosine transform domain. The proposed architecture incorporates low-power techniques such as dual voltage, dual frequency, and clock gating to reduce the power consumption and exploits pipelining and parallelism extensively in order to achieve high performance. The supply voltage level and the operating frequency are chosen for each module so as to maintain the required bandwidth and throughput match among the different modules. A prototype VLSI chip was designed and verified using various Cadence and Synopsys tools based on TSMC 0.25-/spl mu/m technology with 1.4 M transistors and 0.3 mW of estimated dynamic power.     

Pervasive pose-aware applications and infrastructure

Pose-aware devices, in concert with functional geometric models describing architectural spaces, enable a new class of indoor applications, including resource location, route finding, direct population and annotation of world models, and direct information overlay. The article describes these applications along with the device infrastructure and algorithms required to support them. We demonstrate a few prototype devices and applications now underway and point to future directions in which these techniques might evolve.