基于人脸特征和线积分卷积的肖像素描生成

为了更好地模拟素描的笔画和突显肖像素描中五官的部分,提出基于人脸特征和线积分卷积的肖像素描生成方法.首先进行人脸分割,由人脸特征点确定GrabCut算法中每个特征的初始trimap,然后根据分割结果使用线积分卷积算法绘制肖像素描.文中使用了基于分割结果的多分辨率白噪声和方向场,并提出了基于分割结果的自适应性边界提取算法.实验结果表明,该算法改善了肖像素描的生成效果.     

Preparation and application of polybenzoxazine adsorption resin

The synthesis and application of polybenzoxazine adsorption resin was studied. First, the precursor was synthesized by the solventless method. And then a kind of spherical and granular polybenzoxazine resin was obtained using reverse‐phase suspension polymerization technique in the process of solidification. Besides, the influence of dispersion medium, the volume ratio of precursor to medium, the solidification temperature, and the agitation speed were studied in detail in the process of polymerization. Second, the spherical shape of the polybenzoxazine resin was identified by scanning electronic microscope and the thermal stability of resin was measured by thermogravimetric analysis. Finally, the adsorption capacity of the spherical resin on pyridine was studied in cyclohexane systems. The correlation coefficient of Langmuir adsorption constant temperature line was bigger than 0.99, which indicated that the equilibrium sorption date was coincident with the Langmuir isotherm equation. And the saturated adsorptive capacity of dried resin achieved 222.2 mg g^?1. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

秋季太湖叶绿素a浓度荧光反演研究

基于2007年11~12月太湖全湖实测水质参数和光谱数据,首先利用高斯方程对遥感反射率进行过滤分解,找出叶绿素a(chl\|a)吸收峰675 nm以后的荧光反射峰(Fluorescence Peak:FP),再以662 nm处的反射率为基准,采用归一化荧光高度法进行叶绿素a浓度(C chl-a)反演,得到chl-a反演模型。基于高斯分解获取的chl-a的荧光反射峰值R(FP)与662 nm处的反射率R (662)比值［R(FP)/R(662)］与C chl-a之间存在显著的相关性,该模型为秋季太湖水体C chl-a的最佳反演模型。在高悬浮泥沙条件下,该模型能够较好地表示出叶绿素荧光高度与叶绿素浓度之间的关系,为C chl-a反演提供新的方法和依据,并为传感器敏感波段的选取和设置提供参考。     

船体防锈防污涂料体系配套与检测

船体防锈防污涂料体系是船舶涂料中最重要的体系之一。介绍了目前市场上几种防锈涂料及防污涂料,以及防锈防污涂料的主流产品及发展方向。阐述了与不同的防锈防污周期及应用对象相适应的配套产品,并介绍其主要的检测方法。     

Impact of H+ ion irradiation on Matrimid®. I. Evolution in chemical structure

Ion beam irradiation can be used to modify the structure and gas transport properties of glassy polymers. This is the first of two studies that focus on the impact of H⁺ ion irradiation on the structure and permeation properties of the polyimide Matrimid®. Specifically, the evolution in chemical structure after H⁺ irradiation over a range of fluences was analyzed using FTIR spectroscopy and dissolution studies. Although H⁺ ion irradiation at very low ion fluences induced little modification in the chemical structure, irradiation at relatively high ion fluences resulted in crosslinking of the irradiated films. The branched structure of the aliphatic methyl (CH₃) was the most sensitive to the H⁺ ion irradiation. The para‐disubstituted aromatic ring showed the strongest resistance toward ion irradiation and required fairly high doses to induce degradation. Two potential crosslinking mechanisms related to the degradation of the aliphatic methyl and the benzophenone carbonyl were presented. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2010–2019, 2003     

二苯并噻吩合成方法的改进

对文献报道的由联苯和硫在AlCl3催化下反应合成二苯并噻吩(DBT方法中的提纯过程作了改进，大大简化了提纯步骤，使制备DBT的时间缩短了一半，产率为63．4％，经提纯后的成品含量达99．7％，其纯度、外观、晶相均优于进口试剂，但成本远低于进口试剂。产品用FT-IR、LRS、XRD和^1H NMR表征结果与文献报道完全相符合。     

Isotopic Oxygen Exchange and EPR Studies of Superoxide Species on the SrF2/La2O3 Catalyst

By using the in situ IR spectroscopy, the superoxide species (O₂⁻), characterized by the O–O stretching peak at 1130 cm⁻¹, was detected on the SrF₂/La₂O₃ catalyst at temperatures up to 973 K. The introduction of ¹⁸O₂ isotope caused the 1130 cm⁻¹ peak to shift to lower wavenumbers (1095 and 1064 cm⁻¹), consistent with the assignment of the spectra to the superoxide species. A good correlation between the rate of the disappearance of the O₂⁻ species and that of the formation of C₂H₄ was observed, suggesting that O₂⁻ was the active oxygen species responsible for the oxidative coupling of methane (OCM) on the SrF₂/La₂O₃ catalyst. This conclusion was reinforced by the EPR experiments (g_xx = 2.0001, g_yy = 2.0045, g_zz = 2.0685), showing that O₂⁻ was the only paramagnetic oxygen species detectable on the O₂-preadsorbed SrF₂/La₂O₃ catalyst. These results suggest that superoxide O₂⁻ can be a stable active oxygen species, whose role in the OCM reaction cannot be overlooked.     

Effect of clay on the morphology of binary blends of polyamide 6 with high density polyethylene and HDPE‐graft‐acrylic acid

Polyamide 6 (PA6)/HDPE/organo‐bentonite (Oclay) and PA6/HDPE‐grafted‐acrylic acid (PEAA)/Oclay nanocomposites were prepared via melt compounding. The influence of Oclay on the morphology of composites was investigated. Scanning electron microscopy results revealed the size of the dispersed HDPE, and PEAA phase decreased with increasing Oclay content. Transmission electron microscopy and X‐ray diffraction results revealed that the Oclay was predominately intercalated with some evidence of partial exfoliation. The majority of Oclay platelets were concentrated in the PA6 phase and in the interfacial region between PA6 and HDPE (PEAA). The Oclay platelets played the role of coupling species between the two polymers, increasing the interaction of the two phases in certain extent. These results were proved by FTIR and positron annihilation lifetime spectroscopy. Consequently, apparent emulsifying effect was induced. A schematic mechanism of the apparent compatibilization effect was presented. POLYM. ENG. SCI., 47:551–559, 2007. © 2007 Society of Plastics Engineers.     

Simulation of transient process in melting section of reciprocating extruder

Plastic injection molding machine that can be classified as reciprocating extruders are among the most widely used machines in industry. However, most studies in the injector design were based on steady state models developed for extruders that involved no reciprocation. This over-simplified model leaves out the most important aspect of reciprocation. The authors of this paper have derived a transient melting model that takes care of the change from the conventional steady extrusion to that of a discontinuous transient process. This paper describes simulations conducted on the derived model to explain observation that cannot be explained by the steady extrusion model in practical experiments. The simulation was conducted by using parameters given in Donovan's experiment [Polym Engng, 11 (1971) 353]. The simulation results are found to qualitatively match with the experimental results. It proves the validity of the model. Simulation has also been conducted with the model on materials that their viscosities are temperature and shear rate dependent. The result has shown that screw rotation speed, screw axial movement speed, barrel thickness, barrel heat capacity, temperature of heater and polymer are factors affecting the melting speed and the transient effects.     

Effect of filler network on dynamic viscoelastic properties of uncured polymethylvinylsiloxanes filled with silica and carbon black

Dynamic properties of polymethylvinylsiloxane (PMVS) filled with filler‐blends composed of carbon black (CB) and silica (SiO₂) were investigated using an advanced rheometric expansion system. A variety of weight fraction of CB to SiO₂ were 0/100, 10/90, 30/70, 50/50, 70/30, 90/10, and 100/0, and a bifunctional organsilane, bis(3‐triethoxysilylpropyl)tetrasurfane, was used to facilitate the filler dispersion. The results reveal that the incorporation of CB/SiO₂ filler‐blends into PMVS result in a reduced Payne effect. This effect reaches a minimum when the ratio of CB/SiO₂ approaches 1, and then it began to rebound with the ratio increase. Meanwhile, a characteristic Newtonian viscosity plateau appearing in low frequencies also significantly decreases, depending on the amount of CB or SiO₂ added. On the basis of a simplified Fowke model, we ascribe this phenomenon to the deteriorated filler network, which is predominantly induced by the totally different surface activity between CB and SiO₂. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3477–3482, 2006