Mechanochemical processing and microstructural characterization of pure Fe2B nanocrystals

The results of current investigation demonstrate that mechanochemical processing can be used to synthesize high purity Fe₂B nanocrystals by selecting well-optimized milling conditions, reaction paths and proper starting materials. Microstructure, phase analyses, specific surface area, and magnetic properties of the synthesized nanocrystals were examined by using X-ray diffraction/spectroscopy, electron microscopy, nitrogen adsorption–desorption methods following Brunauer-Emmett-Teller equation and vibrating sample magnetometer techniques, respectively. Removal of MgO impurity phase by leaching the resulting powder in the acetic acid solution yielded single phase Fe₂B nanocrystals with the crystallite size and specific surface area of 12.5 nm and 29 m²/g, respectively. Magnetization results clearly indicated the ferromagnetic behavior of Fe₂B nanocrystals with saturation magnetization observed around 96.26 emu·g^?1. Electron microscope images revealed coaxial/spherical powder shape and morphology of the single-phase Fe₂B nanocrystals.     

Sodium and ultrafiltration profiling in hemodialysis: A long-forgotten issue revisited

Sodium and ultrafiltration profiling are method of dialysis in which dialysate sodium concentration and ultrafiltration rate are altered during the course of the dialysis session. Sodium and ultrafiltration profiling have been used, commonly simultaneously, to improve hemodynamic stability during hemodialysis. Sodium profiling is particularly effective in decreasing the incidence of intradialytic hypotension, while ultrafiltration profiling is suggested to decrease subclinical repeated end organ ischemia during dialysis. However, complications such as increased interdialytic weight gain and thirst due to sodium excess have prevented widespread use of sodium profiling. Evidence suggest that different sodium profiling techniques may lead to different clinical results, and preferring sodium balance neutral sodium profiling may mitigate adverse effects related to sodium overload. However, evidence is lacking on the long-term clinical outcomes of different sodium profiling methods. Optimal method of sodium profiling as well as the utility of sodium/ultrafiltration profiling in routine practice await further clinical investigation.     

Influence of mechanical alloying on structural,thermal, and magnetic properties of Fe50Ni10Co10Ti10B20 high entropy soft magnetic alloy

A multicomponent with functional Fe₅₀Ni₁₀Co₁₀Ti₁₀B₂₀ (at.%) high entropy soft magnetic alloy powders were produced from the elemental powders by mechanical alloying (MA). The MA processes were carried out under argon gas atmosphere at a speed of 250 rpm, carrying milling and rest in every 20-min period to prevent the mixture from overheating. Scanning electron microscopy and energy-dispersive X-ray spectroscopy, X-ray diffraction, differential thermal analysis, and vibrating sample magnetometer analysis were utilized to characterize various powdered samples with respect to MA time (0–50 h). The results show that in the first 2.5 h of MA, the mixture of crystalline phases transformed into a nanocrystalline supersaturated α-Fe solid solution phase. With prolonging milling time, the amorphous phase appeared after 20 h of MA. In the final stage of MA (50 h), the saturation magnetization (Ms) and the coercivity (Hc) were 89.7 emu/g and 32.5 Oe, respectively, proposing the alloy as a very good high entropy soft magnet in nature.

     

A simple method to estimate phosphorus mobilization in hemodialysis using only predialytic and postdialytic blood samples

We have recently developed a pseudo one-compartment model to describe intradialytic and postdialytic rebound kinetics of plasma phosphorus. In this model, individual patient differences in phosphorus kinetics were characterized by a single parameter; the phosphorus mobilization clearance (K(M) ). In this work, we propose a simple method to estimate K(M) from predialytic and postdialytic plasma phosphorus concentrations. Clinical data were collected from 22 chronic hemodialysis patients that underwent a 4-hour treatment session. A simple algebraic equation was derived from the pseudo one-compartment model to determine K(M) from predialytic and postdialytic plasma phosphorus concentrations. K(M) values computed using this equation were compared with values obtained from nonlinear regression of the full kinetic model to frequent intradialytic and postdialytic measurements of plasma phosphorus concentrations. There was good agreement between K(M) values (concordance correlation coefficient of 0.94) obtained from the simple method (105?±?52?mL/min, mean?±?SD) and from the full model (99?±?47?mL/min). The 95% confidence interval for the difference between estimated K(M) values was -26 to 36?mL/min. The proposed simple method requires the use of only predialytic and postdialytic blood samples to estimate patient specific K(M) ; this approach may allow easy clinical evaluation of phosphorus kinetics in hemodialysis patients.     

Effects of insufficient air injection on methanogenic Archaea in landfill bioreactor

In this study, methanogenic Archaea diversity in an aerated landfill bioreactor filled with co-disposed incineration bottom ashes and shredded incombustible wastes was monitored and analyzed as a function of time using molecular techniques. Besides, the effects of insufficient air injection on the bioreactor performance and methanogenic diversity were evaluated thoroughly. Results indicated that rapid bio-stabilization of solid waste are possible with aerated landfill bioreactor at various oxygen and oxidation reduction potential levels. Slot-blot hybridization results of leachate samples collected from aerated landfill bioreactor showed that archaeal and bacterial activities increased as stabilization accelerated and bacterial populations constituted almost 95% of all microorganisms. The results of slot-blot hybridization and phylogenetic analysis based on 16S rRNA gene revealed that Methanobacteriales and Methanomicrobiales were dominant species at the beginning while substituted by Methanosarcina-related methanogens close to the end of the operation of bioreactor.     

Effect of electroless etching parameters on the growth and reflection properties of silicon nanowires

Vertically aligned silicon nanowire (Si NW) arrays have been fabricated over large areas using an electroless etching (EE) method, which involves etching of silicon wafers in a silver nitrate and hydrofluoric acid based solution. A detailed parametric study determining the relationship between nanowire morphology and time, temperature, solution concentration and starting wafer characteristics (doping type, resistivity, crystallographic orientation) is presented. The as-fabricated Si NW arrays were analyzed by field emission scanning electron microscope (FE-SEM) and a linear dependency of nanowire length to both temperature and time was obtained and the change in the growth rate of Si NWs at increased etching durations was shown. Furthermore, the effects of EE parameters on the optical reflectivity of the Si NWs were investigated in this study. Reflectivity measurements show that the 42.8% reflectivity of the starting silicon wafer drops to 1.3%, recorded for 10 μm long Si NW arrays. The remarkable decrease in optical reflectivity indicates that Si NWs have a great potential to be utilized in radial or coaxial p-n heterojunction solar cells that could provide orthogonal photon absorption and enhanced carrier collection.     

Surface Treatment of S355JR Carbon Steel Surfaces with ZrB<Subscript>2</Subscript> Nanocrystals by CO<Subscript>2</Subscript> Laser

To improve mechanical properties of S2355JR carbon steel, pre-synthesized ZrB₂ nanocrystals were used to coat the metal surface by laser cladding using 2000 W CO₂ laser. ZrB₂ nanocrystals were synthesized by mechanochemical process. The effect of laser power on the coating layers was examined for optimizing the most effective coating conditions. Microstructural studies were carried out using optical microscope, scanning electron microscope and X-ray diffraction to analyze phase structures of the coated layers. Mechanical characteristics of the laser coated layers were evaluated by studying microhardness, wear and scratch resistance properties. Maximum hardness of the coated layers was observed while cladding with 75 and 125 W laser powers, when other processing parameters and conditions were kept at optimum levels. EDS analysis of these laser cladded layers indicated the formation of complex boro-nitrides, nitrides and carbides of Zr and Fe that contributed to vast increase in hardness of the laser-clad coating on S2355JR steel. Depending upon the laser powers used, the thickness of the coated layers was found to be in the range of 15–37 µm. The wear and micro-scratch tests results revealed significant improvement in wear properties.     

Analysis of rate-dependent tensile properties of polypropylene fibres used in thermally bonded nonwovens

The stress–strain behaviour of polypropylene fibres is evaluated for various tensile strain rates. Fibre samples are extracted from a thermally bonded nonwoven and fixed in a low-load tensile test machine. A methodology is introduced to implement a constant true strain rate at high strain tests for conventional tensile test machines. The obtained results indicate that polypropylene fibres show a highly viscous behaviour, especially during the initial stage of load application. No significant difference in a tensile behaviour of fibres was observed for loading regimes with a constant true strain rate and a constant engineering strain rate.