Reactive compatibilization of PE/PS blends. Effect of copolymer chain length on interfacial adhesion and mechanical behavior

This paper deals with in situ compatibilization of PE/PS blends via Friedel-Crafts reaction, performed at the interphase. Two polyethylenes having different molecular weights, and the same PS, were used along a wide range of catalyst concentration. The influence of the graft copolymer architecture and content on the efficiency of blend compatibilization was studied. The emulsifying effect, morphological aspects and mechanical behavior were also assessed for these blends. The amount of copolymer formed increases with catalyst concentration and the short chain length fraction of the homopolymers. The high molecular weight (MW) copolymers behaved as better compatibilizers as they showed, at the cmc, greater graft copolymer concentration than the low MW ones. A substantial increase in interfacial adhesion and particle size reduction was observed, even at catalyst concentrations as low as 0.3 wt%. In correspondence, mechanical properties, like ductility and yield strength, were enhanced by the effect of this Friedel-Crafts reaction's compatibilization.     

Study of the neutral lipids of sunflower meal and isolates

Two types of sunflower protein isolates have been obtained from prepress and solvent extracted sunflower meal. The first was obtained by precipitation (at the isoelectric point) of the alkaline extract of the meal, and washing the curd with water. In the second, the alkaline extraction was carried out in the presence of sodium sulfite, and the curd was washed with water, ethanol and acetone. Both isolates were air-dried and then dried under vacuum at 50 C. From the total lipids, obtained with 86% ethanol, the neutral lipids were separated using a column of Florisil. The lipids studied were those of the two isolates mentioned above as well as those of the original meal. The following types of compounds were separated, identified and quantified: hydrocarbons, waxes, methyl esters, triglycerides, free fatty acids, diglycerides, free sterols, and hydroxy fatty acids.     

Neutral sterols of sawflies (symphyta): Their relationship to other hymenoptera

To investigate sterol utilization in sawflies, the neutral sterols of four species of sawflies were determined by gas-liquid chromatography and mass spectrometry, and compared to the respective dietary plant material. Cholesterol was the predominant (55–76%) sterol in all species and stages of sawflies examined. Host plants, however, contained primarily sitosterol (50–88%), along with other 24-alkylsterols and only 0.5–5.9% cholesterol, indicating that the sawflies examined are capable of dealkylating the C₂₈ and C₂₉ phytosterols in their diet to cholesterol. Comparative sterol metabolism in Hymenoptera is discussed.     

Early soot formation stages in low-pressure diffusional counterflow hydrocarbon flames

Early soot formation stages were investigated in low-pressure counterflow hydrocarbon flames. A mechanism is proposed for the formation of aggregates and discrete spherical soot particles. It is proposed that the formation of the physical surface is preceded by the emergence of a skeleton structure consisting of carbon molecule chains as a result of their polarizing and dipole interaction with the charged soot nuclei.Kiev. Translated from Fizika Goreniya i Vzryva, Vol. 29, No. 3, pp. 97–100, May–June, 1993.     

On the thermal stability of xanthan gum

The thermal stability of xanthan gum in dilute aqueous solutions at 90°C is considered. The relative viscosity as a function of ageing time is discussed, and it has been found to depend on the polymer concentration and conformation as well as on the salt content. The effectiveness of a quencher demonstrates the existence of a free-radical process in the degradation. During ageing, the molecular weight first decreases by rapid random hydrolysis of the main chain and loss of the pyruvate and acetate substituents. Later, oligomers are formed corresponding to a breakdown of both the side chain and the main chain. The identification of cellodextrins in the oligomer pool demonstrates the second effect.     

Influence of catalyst type on the curing process and network structure of alkyd coatings

Recent studies have shown that cobalt catalysts, used for curing of alkyd coatings, are potentially carcinogenic, and hence replacement by new environmental friendly catalysts is needed. The influence of different metal based catalysts on the oxidation process has been studied extensively in model systems, consisting of unsaturated oils. However, these results may not be representative for real coatings, since in these systems the oxygen diffusion is much lower than in model systems and therefore may have a large effect on the curing. In this paper, we will show how the curing of an alkyd coating depends on the type of catalyst (cobalt or manganese based). The curing process is studied using a high spatial resolution nuclear magnetic resonance (NMR) setup. The final network structure and cross-link density are found to be correlated with the catalyst used, i.e. a cobalt based catalyst and two manganese based catalysts. The difference in final network structure is investigated by NMR T₂ relaxation analysis and the glass transition temperature T_g measured using a differential scanning calorimeter (DSC). In case of the cobalt based catalyst a cross-linking front was observed and a high cross-link density was found, compared to the manganese based catalysts, in which case no sharp cross-linking front was observed. To interpret the observed NMR profiles in more detail, simulations based on a reaction-diffusion model were performed. From the results of these simulations estimates were obtained for the reaction constants and the diffusion of oxygen for the different catalysts.     

Iron species incorporated over different silica supports for the heterogeneous photo-Fenton oxidation of phenol

Iron-containing catalysts have been prepared following different synthesis routes and silica supports (amorphous, zeolitic and mesostructured materials). Activity and stability of these materials were assessed on the photo-Fenton degradation of phenolic aqueous solutions using near UV irradiation (higher than 313 nm) at room temperature and initial neutral pH. Their catalytic performance was monitored in terms of phenol and total organic carbon (TOC) conversions. Aromatic compounds and carboxylic acids as by-products coming from incomplete mineralization of phenol as well as the efficiency of each catalytic system in the use of the oxidant were also studied. Stability of the materials throughout the photo-Fenton reaction was evaluated in terms of metal leachibility. Activity and stability depend on the environment of iron species and features of silica support. The evolution of pH with the reaction time and their relationship with TOC degradation and leaching degree has been discussed. A nanocomposite material of crystalline iron oxides supported over mesostructured SBA-15 material is shown the most successful catalyst for degradation of phenolic aqueous solutions by photo-Fenton processes, achieving an outstanding overall catalytic performance accompanied with a noteworthy stability.     

Mechanosynthesis of complex oxides and preparation of mixed conducting nanocomposites for catalytic membrane reactors

Nanopowders of LaGaO₃- and LaMnO₃-based complex perovskites (P) and ceria-based fluorites (F) were prepared by mechanosynthesis. Compatible nanocomposites F + P and P + P with mixed ion and electron conducting (MIEC) properties were prepared and sintered at moderate temperatures up to dense ceramics. The obtained materials were studied by means of XRD, SEM, TEM, electrical conductivity measurements, temperature programmed (TP) reduction/oxidation and preliminary estimations of permeability were obtained. A new strategy based on the advantages of the mechanochemical ceramic approach is proposed to design multilayer ceramic membranes for CMR. Casting technology and one-step sintering were used for the production of thin film membranes with MIEC properties on porous substrates. The coarse fraction of as-milled powders from agglomerates with density 70% was used for the porous substrate, and fine fractions of aggregates with sizes <1 μm were used in preparation of composites for thin dense films. Ceria-based composites prepared by the Pechini route and/or mechanochemical method are proposed as materials for protecting thin films.