An emission time series generator for pollutant release modelling in urban areas

Dynamic priority pollutant (PP) fate models are being developed to assess appropriate strategies for limiting the release of PPs from urban sources and for treating PPs on a variety of spatial scales. Different possible sources of PP releases were mapped and both their release pattern and release factors were quantified as detailed as possible.This paper focuses on the link between the gathered PP sources data and the dynamic models of the urban environment. This link consists of (1) a method for the quantitative and structured storage of temporal emission pattern information, (2) the retrieval of spatial emission source data from a GIS covering the studied urban area, (3) the coupling of the (GIS-based) spatial emission source data with temporal emission pattern information and (4) the generation of PP release time series to feed the dynamic sewer catchment model.Steps 3 and 4 were included as the main features of a dedicated software tool. Finally, this paper also illustrates the method's applicability to generate model input time series for generic pollutants (N, P and COD/BOD) in addition to priority pollutants.     

Efficient and Scalable Kinetic Resolution of Racemic 4‐Formyl[2.2]paracyclophane via Asymmetric Transfer Hydrogenation

Herein we wish to report a new non‐enzymatic kinetic resolution of racemic 4‐formyl[2.2]paracyclophane based on Noyori asymmetric transfer hydrogenations (KR‐ATH). Our approach, which provides an efficient access to enantiopure (R_p)‐ and (S_p)‐4‐formyl[2.2]paracyclophane (>99% ee, 39% and 41% isolated yields, respectively), is operationally simple and can be run on the gram‐scale thus confirming the practical applicability of this method.

     

The influence of gun transverse speed on electrochemical behaviour of thermally sprayed Cr3C2-NiCr coatings in 0.5 M H2SO4 solution

In the present study, different types of 75% Cr₃C₂-25% NiCr coatings were applied on a steel substrate by means of high velocity oxygen fuel spraying (HVOF), and studied using ac and dc electrochemical measurements in an aerated and unstirred 0.5 M H₂SO₄ solution. Structural characterization was determined before and after electrochemical tests. Differences between all sprayed systems are related to the gun transverse speed and number of deposited layers, which strongly affected the electrochemical characteristics of the coated steels. The coating obtained with a higher torch speed showed better resistance against corrosion. The electrochemical impedance results were analyzed using an equivalent circuit where porosity of the coatings and substrate oxidation were considered.     

Simulation of Jet-Induced Geysers in Reduced Gravity

Control of cryogenic propellant tank pressure during tank refueling and expulsion in low gravity is an important technical challenge to overcome for future long duration missions in space. One method proposed to control tank pressurization involves the use of jet-induced geysers. Two-dimensional computational models have been developed and used with limited success in previous efforts to predict geyser heights in microgravity. A three-dimensional flow simulation is used to model jet-induced geysers in reduced gravity. Geyser flows are commonly characterized by the presence of turbulent jets, transient flow, deforming free surfaces, and surface tension effects. As is the case for many turbulent flow applications, accuracy in simulating complex turbulent flows is critically dependent on the selection of a suitable turbulence model. The sensitivity of the simulation geyser predictions to a suite of popular turbulence models is assessed. Simulation results are compared to available experiment results. By expanding upon the work already completed, the model is used to simulate a broad range of cases within the experiment test matrix. Simulation results suggest the two dimensional simulation using the k-ε turbulence model provides the most accurate results for jet-induced geysers in reduced gravity when compared to available experiment data.     

Bioreactor Transient Exposure Activates Specific Neurotrophic Pathway in Cortical Neurons

Altered gravity forces might influence neuroplasticity and can provoke changes in biochemical mechanisms. In this contest, neurotrophins have a pivotal role, particularly nerve growth factor (NGF) and brain derived neurotrophic factor (BDNF). A suspension of dissociated cortical cells from rat embryos was exposed to 24 h of microgravity before plating in normal adherent culture system. Expression and transductional signalling pathways of NGF and BDNF were assessed at the end of maturational process (8–10 days in vitro). Rotating wall vessel bioreactor (RWV) pre-exposition did not induce changes in NGF expression and its high affinity receptor TrkA. On the contrary both BDNF expression and its high affinity receptor TrkB were strongly up-regulated, inducing Erk-5, but not Erk-1/2 activation and, in turn, MEF2C over-expression and activation. According to our previous and present results, we postulate that relatively short microgravitational stimuli, applied to neural cells during the developmental stage, exert a long time activation of specific neurotrophic pathways.     

Utilization of electrochemical impedance spectroscopy for monitoring bornite (Cu5FeS4) oxidation by Acidithiobacillus ferrooxidans

In this work, the monitoring of the bacterial and chemical dissolution of bornite was evaluated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS); the mineral surface was examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The analysis of CV results allowed attributing the different peaks observed in both direct and reverse potential scanning to the oxidation of bornite to a secondary covellite and its reduction via different non stoichiometric copper sulphides intermediaries. EIS data for bornite were obtained in control medium up to 78 h of immersion, when a cellular suspension of A. ferrooxidans was added and the experiments continued up to a 192 h of test. The EIS response was different when bacteria were added in the beginning of the test or after some hours of immersion in acid solution. The experiments were performed in different cell configurations and a model of the electrode/electrolyte interface. The correspondent equivalent electrical circuit was used to fit impedance spectra for all studied conditions. A common equivalent circuit used for corrosion processes where anodic (degradation of the mineral) and cathodic (oxygen reduction) reactions occur in parallel, together film and biofilm formation was proposed.     

Neuropharmacological dissection of placebo analgesia: expectation-activated opioid systems versus conditioning-activated specific subsystems

The yeast retrotransposon Ty5 preferentially integrates into regions of silent chromatin. Ty5 cDNA also recombines with homologous sequences, generating tandem elements or elements that have exchanged markers between cDNA and substrate. In this study, we demonstrate that Ty5 integration depends upon the conserved DD(35)E domain of integrase and cis-acting sequences at the end of the long terminal repeat (LTR) implicated in integrase binding. cDNA recombination requires Rad52p, which is responsible for homologous recombination. Interestingly, Ty5 cDNA recombines at least three times more frequently with substrates in silent chromatin than with a control substrate at an internal chromosomal locus. This preference depends upon the Ty5 targeting domain that is responsible for integration specificity, suggesting that localization of cDNA to silent chromatin results in the enhanced recombination. Recombination with a telomeric substrate occasionally generates highly reiterated Ty5 arrays, and mechanisms for tandem element formation were explored by using a plasmid-based recombination assay. Point mutations were introduced into plasmid targets, and recombination products were characterized to determine recombination initiation sites. Despite our previous observation of the importance of the LTR in forming tandem elements, recombination cannot simply be explained by crossover events between the LTRs of substrate and cDNA. We propose an alternative model based on single-strand annealing, where single-stranded cDNA initiates tandem element formation and the LTR is required for strand displacement to form a looped intermediate. Retrotransposons are increasingly found associated with chromosome ends, and amplification of Ty5 by both integration and recombination exemplifies how retroelements can contribute to telomere dynamics.     

Modulation of mitochondrial respiration by nitric oxide: investigation by single cell fluorescence microscopy

With the electro-driven import of rhodamine 123, we used single cell fluorescence microscopy to single out the contribution of nitric oxide (NO) in controlling mitochondrial membrane potential expressed by (stationary growing) rhabdomyosarcoma and neuroblastoma cells in culture. The experimental design and the computer-aided image analysis detected and quantitated variations of fluorescence signals specific to mitochondria. We observed that 1) the two cell lines display changes of fluorescence dependent on mitochondrial energization states; 2) mitochondrial fluorescence decreases after exposure of the cells to a NO releaser; 4) the different fluorescence intensity measured under stationary growing conditions, or after activation and inhibition of constitutive NO synthase, is consistent with a steady-state production of NO. Direct comparison of single cell fluorescence with bulk cytofluorimetry proved that the results obtained by the latter method may be misleading because of the intrinsic-to-measure lack of information about distribution of fluorescence within different cell compartments. The kinetic parameters describing the reactions between cytochrome oxidase, NO, and O2 may account for the puzzling (20-fold) increase of the KM for O2 reported for cells and tissues as compared to purified cytochrome c oxidase, allowing an estimate of in vivo NO flux.     

A fast dual boundary element method for 3D anisotropic crack problems

In the present paper a fast solver for dual boundary element analysis of 3D anisotropic crack problems is formulated, implemented and tested. The fast solver is based on the use of hierarchical matrices for the representation of the collocation matrix. The admissible low rank blocks are computed by adaptive cross approximation (ACA). The performance of ACA against the accuracy of the adopted computational scheme for the evaluation of the anisotropic kernels is investigated, focusing on the balance between the kernel representation accuracy and the accuracy required for ACA. The system solution is computed by a preconditioned GMRES and the preconditioner is built exploiting the hierarchical arithmetic and taking full advantage of the hierarchical format. The effectiveness of the proposed technique for anisotropic crack problems has been numerically demonstrated, highlighting the accuracy as well as the significant reduction in memory storage and analysis time. In particular, it has been numerically shown that the computational cost grows almost linearly with the number of degrees of freedom, obtaining up to solution speedups of order 10 for systems of order 10⁴. Moreover, the sensitivity of the performance of the numerical scheme to materials with different degrees of anisotropy has been assessed. Copyright © 2009 John Wiley & Sons, Ltd.