Morphology of poly(isoprene-co-styrene-co-methacrylic acid) latex prepared by two-stage seeded emulsion polymerization

Heterogeneous latexes were prepared by a two-stage seeded emulsion polymerization process at 80°C using potassium persulfate as the initiator and sodium dodecyl sulfate as the emulsifier. Poly(styrene-co-methacrylic acid) latexes containing varying amounts of methacrylic acid (MAA) were used as seeds. The second-stage polymer was poly(isoprene-co-styrene-co-methacrylic acid). By using different methods for the addition of the MAA and by varying the amount of MAA, the hydrophilicity of the polymer phases could be controlled. The morphologies and size distributions of the latex particles were examined by transmission electron microscopy. The latexes were in all cases unimodal, and had narrow particle size distributions. The particles displayed different morphologies depending on the polymerization conditions and monomer composition. The hydrophilic properties of the two phases in combination with the internal particle viscosity and crosslinking of the second phase during polymerization were found to be the major factors influencing the particle morphology. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 63: 1543–1555, 1997     

Bulk surface photografting process and its application. III. Photolamination of polymer films

This paper introduces a set of new concepts related to the macromolecular design and to the practice in the realm of lamination by photografting, with experimental studies of the synthesis, structure, and performance of various systems, including valence bond adhesion of the organic polymeric materials, hyperbranched macromolecules rooted to the surface of organic substrates, macromolecular networks rooted on and bridged between two organic substrates, and a synthetic route combining primary and secondary photografting processes for the preparation of supermolecular architectures. In successful photolamination experiments based on these ideas, hyperbranched macromolecules of large size (10–20 μm) were obtained after initiation with aromatic ketones, which undergo a photoreduction reaction. A range of different organic polymeric films have been laminated. T-peel tests show most of the laminates broke inside the substrates and not at the interface between adhesive and substrate. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 63: 1723–1732, 1997     

Swelling of poly(styrene-co-methacrylic acid) latex by isoprene

Carboxylated polystyrene latex was used as seed and isoprene as the second-stage monomer in an inhibited, seeded emulsion polymerization recipe for studies of monomer swelling kinetics at 80°C during interval III of an emulsion polymerization. The isoprene was added to the reactor in small portions using a syringe, and changes in the reactor pressure were continuously measured. Isoprene was added until a free liquid monomer phase was formed; that was, interval II was reached, as indicated by no further pressure increase upon the addition of more monomer. When the observed pressure increment, Op_i, per unit isoprene added was plotted as a function of the volume fraction of polymer in the latex particles, v_p, the graph could be divided into 3 domains. The break points in the Op_i curve could, in an analogous emulsion polymerization, be identified as the glass transition temperature for the polymer, the so-called gel point in interval III and the onset of interval III. In the second domain, where the v_p was between the glass transition temperature, T_g, for the seed polymer and the gel point, the value of Op_i decreased significantly with increasing monomer concentration in the latex particles. This was due to the entropy of mixing and the monomer acting as a plasticizer in the seed polymer. The rate of sorption of monomer to the latex particles was low at high values of v_p. It then increased rapidly with increasing monomer concentrations in the latex particles, [M]_p, and a maximum was observed in domain 2. At lower values of v_p the sorption rate decreased in domain 3 and finally became zero as the free liquid monomer phase started to form. Results from batch polymerization suggested that the rate of diffusion of adsorbed monomer and oligo radicals into the particles was retarded. A simplified form of the Vanzo equation was used to estimate the monomer partitioning. It predicted too high a value of [M]_p, especially in domain 2 of the swelling process. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 2041–2051, 1998     

Determination of the detection limit of Ni at the Lund AMS facility by using characteristic projectile X-rays

Accelerator mass spectrometry (AMS) is an ultra-sensitive method for counting atoms, both radionuclides and stable nuclides. When using small tandem accelerators to measure heavy isotopes, interfering isobars are often troublesome. One way to reduce this interference is to combine AMS with the detection of characteristic X-rays of the projectile. After analysis in the AMS system it is possible to identify ions of different atomic number by their characteristic X-rays, by slowing down the ions in a suitable target. In this paper, the detection limit of ⁵⁹Ni at the Lund AMS facility is reported. A method for the chemical extraction of nickel from stainless steel, combined with a purification step to reduce the cobalt content in the sample by several orders of magnitude, is also described.     

The influence of EB-crosslinking on barrier properties of HDPE–mica composites

High-density polyethylene (HDPE) was compounded with untreated and surface-treated mica (10, 20, 40 wt %) and composites were injection-molded. The composites were radiation crosslinked (100, 300, 700 kGy) and hydrocarbon permeability, tensile impact strength, and tensile strength at 25 and 80°C of the composites were examined. The permeability of HDPE decreased from 7 to 3.6 g/(d × m²) by compounding the polymer with 20 wt % mica, and the permeability was additionally reduced to 1.3 g/(d × m²) by irradiation of the compounds (700 kGy). When surface-treated mica was used, the permeability of the composite furthermore decreased to about 1.0 g/(d × m²). Upon irradiation, the E modulus measured at 25°C increased 5% when the dose was 300 kGy. At 80°C, the corresponding increase was 40%. The tensile impact strength of an unfilled polymer increased more than three times by an irradiation dose of 700 kGy, and for a polymer with 10 wt % mica, the tensile impact strength was twice the level of an unirradiated composite. © 1996 John Wiley & Sons, Inc.     

Photopolymerization of dendritic methacrylated polyesters. I. Synthesis and properties

The so-termed starburst dendritic polyesters differ from classical polymers by their structural symmetry, high degree of branching, and high density of terminal functionality. The divergent synthesis of a series of polydisperse dendritic polyesters based upon pentaerythritol and 1,2,4-benzenetricarboxylic anhydride, modified by glycidvl methacrylate and methacrylic anhydride, is described, proceeding in a stepwise growth manner starting from an “initiator core,” building branched arms. These materials have about eight (two samples), 12, or 16 methacrylate double bonds (indicated as D-1-OH, D-1, D-2, and D-3, respectively) at the chain extremities on each molecule. The rheological behavior was investigated by measuring the dynamic viscosity of the dendritic polyesters. The viscosities of the dendritic polyesters largely decrease in the order D-1-OH, D-1, D-2, and D-3 at lower frequency, but the viscosities of D-1-OH and D-1 decrease dramatically at higher frequency. Using a viscometric cup, the flow time of the dendritic methacrylated polyesters was compared with epoxy acrylate-modified unsaturated polyester of a linear type and it was shown that the flow time for the former is only one-third of that for the latter. The thermal mechanical properties and glass transition temperatures of the UV-cured films increase with the degree of terminal functionality. © 1996 John Wiley & Sons, Inc.     

Oxygen uptake of bottom sediments studied in situ and in the laboratory

Oxygen uptake by soft bottom sediments was measured in situ with an oxygen electrode in a bell jar. Values in the range 0·3-3·0 g O₂ m⁻² d⁻¹ were obtained at 19 localities in fresh and brackish water. Comparative measurements were made in the laboratory on sediment cores. These gave consistently lower values than the in situ measurements. Laboratory experiments showed that the oxygen uptake depended on the oxygen concentration and that the temperature coefficient decreased with increasing temperature. There was no simple correlation between oxygen uptake and content organic matter in sediments.     

Periodic Control for Improved Low-Temperature Catalytic Activity

The influence of transient changes in the gas composition on the low-temperature activity of a commercial three-way catalyst and a Pt/Al₂O₃ model catalyst has been studied. By introducing well-controlled periodic O₂ pulses to simple gas mixtures of CO or C₃H₆ (in N₂), a substantial improvement of the low temperature oxidation activity was observed for both catalysts. The reason for low activity at low temperatures is normally attributed to self-poisoning by CO or hydrocarbons. The improved catalytic performance observed here is suggested to origin from the transients causing a surface reactant composition that is favourable for the reaction rate.