Molecular Networking for Drug Toxicities Studies: The Case of Hydroxychloroquine in COVID-19 Patients

Using drugs to treat COVID-19 symptoms may induce adverse effects and modify patient outcomes. These adverse events may be further aggravated in obese patients, who often present different illnesses such as metabolic-associated fatty liver disease. In Rennes University Hospital, several drug such as hydroxychloroquine (HCQ) have been used in the clinical trial HARMONICOV to treat COVID-19 patients, including obese patients. The aim of this study is to determine whether HCQ metabolism and hepatotoxicity are worsened in obese patients using an in vivo/in vitro approach. Liquid chromatography high resolution mass spectrometry in combination with untargeted screening and molecular networking were employed to study drug metabolism in vivo (patient’s plasma) and in vitro (HepaRG cells and RPTEC cells). In addition, HepaRG cells model were used to reproduce pathophysiological features of obese patient metabolism, i.e., in the condition of hepatic steatosis. The metabolic signature of HCQ was modified in HepaRG cells cultured under a steatosis condition and a new metabolite was detected (carboxychloroquine). The RPTEC model was found to produce only one metabolite. A higher cytotoxicity of HCQ was observed in HepaRG cells exposed to exogenous fatty acids, while neutral lipid accumulation (steatosis) was further enhanced in these cells. These in vitro data were compared with the biological parameters of 17 COVID-19 patients treated with HCQ included in the HARMONICOV cohort. Overall, our data suggest that steatosis may be a risk factor for altered drug metabolism and possibly toxicity of HCQ.     

Preparation of TiO2-pillared montmorillonite as photocatalyst Part I. Microwave calcination, characterisation, and adsorption of a textile azo dye

Two photocatalysts based on TiO₂-pillared intercalated montmorillonite have been prepared by microwave for 10 min at 700 W or by furnace heating at 673 K. Montmorillonite pillaring with TiO₂ increased the basal spacing to 14.7 Å (conventional heating) and 17.6 Å (microwave heating). XRD patterns of both materials showed the presence of 100% anatase with a slightly higher rate of crystallinity obtained through microwave calcination than by conventional heating at 673 K. The BET specific surface area of the microwave prepared photocatalyst (151 m² g^− 1) was 3 fold higher than those of the Degussa TiO₂ P25. At pH = 5.8, the maximum adsorption capacity of Solophenyl red 3BL (a textile azo dye) on the TiO₂-pillared montmorillonite calcined by microwave was 185 mg g^− 1, whereas it was 1.4 and 3 fold lower on the TiO₂-pillared montmorillonite calcined at 673 K, and on the Degussa TiO₂ P25 respectively. The influence of pH on the adsorption of the dye depended on the pH_ZPC of the pillared montmorillonites.     

Biochemical,functional, and histochemical effects of essential fatty acid deficiency in rat kidney

The present study was designed to examine the effects of EFA deficiency (EFAD) on biochemical, functional, and structural aspects of the kidney in growing and adult rats fed a normal or EFAD diet for 9 wk after weaning. Food and fluid intake (FI), urine volume, and Na⁺ and K⁺ excretions were measured weekly from weeks 4 to 8 by placing the rats in individual metabolic cages for 24 h. At week 9, Li⁺ and a 5% water load, respectively, were administered at 14 and 1.5 h prior to glomerular and proximal tubular function studies, as assessed by 3-h creatinine (C_Cr) and Li⁺ (C_Li+) clearances. Hematocrit and urine volume; serum and urine [Cr], [Li⁺], [Na⁺], and [K⁺]; and renal FA distribution were also measured. Data [corrected to 100 g/body weight (bw) and presented as means ±SEM] were significant, at P<-0.05. Despite a similar ingestion of solids from weeks 4 to 7 (weeks 7 to 10 of life), the rats on the EFAD diet showed a decreased body weight from week 5. From weeks 4 to 8, Fl and urine volume were similar for both groups, but the Fl increased at week 6 in the EFAD group; 24-h Na⁺ and K⁺ excretions were similar at all weeks, except for an increase in the EFAD group for both ions at week 7. In the EFAD group, C_Cr and C_Li+ decreased by 27 and 56.3%, respectively (385.7±33.4 vs. 280±21.1, and 21.0±2.1 vs. 9.2±1.1 μL/min/100 g; n=9 vs. 10), the latter result suggesting increased proximal reabsorption. The 3-h Na⁺ and K⁺ excretions were similar, but the Li⁺ decreased (0.78±0.06×10⁻² vs. 0.32±0.03×10⁻² μeq/min/100 g) in the EFAD group, giving additional support to the suggestion. Renal structure was normal and similar for both groups, but the EFAD group showed a more prominent proximal tubule brush border, together with heavier periodic acid-Schiff staining in all specimens from weeks 5 to 9. In the EFAD group, FA of the n−9 and n−7 series were higher, but most of the n−6 series were lower as a percentage of total lipids in the medulla and cortex. Medullary levels of 20∶4n−6 were maintained, 22∶4n−6 declined twice, arachidonic acid was maintained, and 20∶5n−3 was lower. The EFAD diet affected glomerular function, proximal tubular structure and function, and FA distribution in the rat kidney.     

Chemical inhibitors when timing is critical: a pharmacological concept for the maturation of T cell contacts

Cellular signal transduction proceeds through a complex network of molecular interactions and enzymatic activities. The timing of these molecular events is critical for the propagation of a signal and the generation of a specific cellular response. To define the timing of signalling events, we introduce the combination of high-resolution confocal microscopy with the application of small-molecule inhibitors at various stages of signal transduction in T cells. Inhibitors of Src-family tyrosine kinases and actin dynamics were employed to dissect the role of the lymphocyte-specific tyrosine kinase Lck in the formation and maintenance of T cell receptor/CD3-dependent contacts. Anti-CD3epsilon-coated coverslips served as a highly defined stimulus. The kinetics of the recruitment of the yellow fluorescent protein-tagged signalling protein ZAP-70 were detected by high-resolution confocal microscopy. The analysis revealed that at 5 min after receptor engagement, Lck activity was required for maintenance of contacts. In contrast, after 20 min of receptor engagement, the contacts were Lck-independent. The relevance of the timing of inhibitor application provides a pharmacological concept for the maturation of T cell-substrate contacts.     

Cytostatic activity of 1,10-phenanthroline derivatives generated by the clip-phen strategy

The cytostatic activities of a series of twelve 1,10-phenanthroline (Phen) derivatives and of their copper complexes were studied on L1210 murine leukemia cells. Large increases in the biological activity were observed for compounds of the 3-Clip-Phen series, in which two Phen moieties were bridged at their C3 positions by an alkoxy linker, the 3-pentyl-Clip-Phen derivative showing an IC(50) value of 130 nM while Phen shows an IC(50) value of 2500 nM under the same conditions. IC(50) values seemed to be modulated not only by the position, the nature, and the length of the linker of Clip-Phen but also by hydrophobicity. Since copper complexes of Phen are chemical nucleases and nucleic acids are thus a potential target for these compounds, the corresponding copper complexes were also studied. Copper complexation of the 3-Clip-Phen ligands did not increase their biological activities. Attempts to vectorize 3-Clip-Phen derivatives with a DNA binder such as spermine or with a cell-penetration peptide failed to increase their biological activity relative to the original 3-Clip-Phen series.     

Thulium and Ytterbium-Doped Titanium Oxide Thin Films Deposited by Ultrasonic Spray Pyrolysis

Thin films of thulium and ytterbium-doped titanium oxide were grown by metal-organic spray pyrolysis deposition from titanium(IV)oxide bis(acetylacetonate), thulium(III) tris(2,2,6,6-tetramethyl-3,5-heptanedionate) and ytterbium(III) tris(acetylacetonate). Deposition temperatures have been investigated from 300 to 600 °C. Films have been studied regarding their crystallinity and doping quality. Structural and composition characterisations of TiO₂:Tm,Yb were performed by electron microprobe, x-ray diffraction, and Fourier transform infrared spectroscopy. The deposition rate can reach 0.8 μm/h. The anatase phase of TiO₂ was obtained after synthesis at 400 °C or higher. Organic contamination at low deposition temperature is eliminated by annealing treatments.     

Impedance of passive oxide films with graded thickness: Influence of the electrode and cell geometry

The impedance of cylindrical electrodes and of rectangular sheet electrodes coated by passive films with either a constant or a graded thickness has been calculated using a finite element method for solving Laplace's equation. The comparison of different electrode/cell geometries characterized by homogenous (on cylindrical electrodes) or inhomogeneous distributions of primary current (on rectangular sheet electrodes) and by homogeneous or graded thickness has allowed to clarify the origin of frequency dispersion phenomena. Calculated curves were compared with experimental impedance plots obtained with Nb and Ta sheet electrodes and with Nb cylindrical electrodes. The results of the finite element calculations for rectangular sheet electrodes are in better agreement with the experiments than those of a previous analytical calculation developed under a simplifying assumption (i.e. identical local electrolyte resistance at each point of the electrode surface) which was equivalent to neglecting current distribution induced by electrode and cell geometry.     

Investigating the thermo-mechanical behaviour of cementitious materials using image processing techniques

Infrared thermography and Digital Image Correlation were used to analyse the mechanical behaviour of mortar, concrete, and high-performance concrete specimens under quasi-static loads. For specimens under compressive loads, Infrared thermography clearly showed the thermo-elastic coupling as well as thermal dissipations due to the microcracking state of freeze/thaw damaged concrete specimens. During an up to failure compressive test, localized thermal effects were observed at the macro-crack location before it appeared. Strain fields at the surface of steel-fibre high-performance concrete specimens under tensile and flexural loadings were determined using the Digital Image Correlation (DIC) technique. These experiments showed that the strain fields early became inhomogeneous. Strains concentrated in multiple localization zones which highlighted the role of the steel fibres in transmitting the internal forces.     

Synthesis and properties of polyolefin graft copolymers by a grafting “onto” reactive process

The synthesis of graft copolymers by the grafting “onto” process in the molten state was described. Functional oligomers obtained by telomerization or by ATRP were reacted onto maleic anhydride grafted polypropylene (PP-g-MAH) and poly(ethylene-ter-maleic anhydride-ter-methyl acrylate) (P(E-ter-MAH-ter-MeA)) to obtain PP-g-PMMA and P(E-ter-MAH-ter-MeA)-g-PMMA graft copolymers, respectively. The grafting of different mono-functional oligomers bearing hydroxyl, aliphatic amine or aromatic amine functions was investigated at 180 °C and at 200 °C. The grafting efficiency was very low in the case of hydroxyl-terminated PMMA, while the amine-terminated PMMA led to high yields. In the last part, PP-g-PMMA and P(E-ter-MAH-ter-MeA)-g-PMMA graft copolymers were synthesized by the reaction of aliphatic amine functional PMMA oligomers onto PP-g-MAH and P(E-ter-MAH-ter-MeA), respectively. The influence of the molecular weight of PMMA oligomers was investigated and showed that he grafting efficiency slightly decreases with the increasing molecular weight. However, this process allows the synthesis of PP-g-PMMA graft copolymers containing 6-45 wt% of PMMA side chains. The microstructure of the nanostructured PP-g-PMMA and P(E-ter-MAH-ter-MeA)-g-PMMA graft copolymers was investigated by TEM and SEM. This was established that the addition of PP-g-PMMA in PP/PMMA binary blends allows to control their morphologies and stabilities.     

EPR Spectroscopy and Imaging of Free Radicals in Food

Electron Paramagnetic Resonance (EPR) is a well-known spectroscopic and imaging technique that can detect free radicals both in vitro and non-invasively in vivo, with high sensitivity. In food, free radicals can be generated by several commonly used industrial processes, such as radiosterilization or heat treatment. EPR spectroscopy has been widely used to detect radioinduced free radicals in food, but is limited to the measurement of the global response of a sample. EPR imaging (EPRI) allows the spin density distribution of free radicals to be mapped within objects. We investigated the possibility of acquiring 2D and 3D EPR images of the distribution of free radicals in various foodstuffs with naturally occurring or induced free radicals, including frogs' legs, tea leaves, coffee beans, and sunflower seeds. Our results demonstrated that the free radicals contained in foodstuffs give EPR signals with characteristics compatible with the acquisition of high-quality images. Small-size structures (e.g., frog bones, 1.0–1.5 mm width) could be delineated with accuracy. The strongest signals came from irradiated samples, but low-intensity signals from naturally occurring free radicals could also be imaged. EPRI is likely to be used when additional information is needed about the spatial distribution of unpaired electrons. The method offers the unique ability to monitor the fate of these free radicals in biological samples and in vivo.