REACTION KINETICS PARAMETERS DESCRIBING DISPLACEMENT BY ACIDS OF STRUCTURAL METALLIC IONS FROM CLAY MINERALS

Chemical kinetics parameters describing reactions of naturally-occurring clay minerals with acids were determined using batch reaction and analytical techniques. Clay minerals included sodium montmo-rillonite, kaolinite, and illite, reacting with hydrochloric acid, nitric acid, and sulfuric acid. Two acid concentrations were examined at 50 and 70^°C. Displacement by acids of aluminum and magnesium from clays was found to follow pseudo-first order kinetics. Data analysis verified the batch reaction technique for determining kinetics parameters of acid-clay reactions and demonstrated acid neutralization by naturally-occurring clays. For reactions of sodium montmorillonite with hydrochloric acid, nitric acid, and sulfuric acid, reaction rate coefficients for displacement of aluminum ranged from 1·73 × 10^-4 kg/mol-hr at 50^°C to 3·02 × 10^-3 kg/mol-hr at 70^°C. Displacement of magnesium from sodium montmorillonite by these acids occurred at rates ranging from 3·68 × 10^-4 kg/mol-hr at 50^°C to 1·12 × 10^-2 kg/mol-hr at 70^°C. Activation energies for displacement by acids of aluminum from sodium montmorillonite were calculated to range from 31,000J/mol to 112,000J/mol, while activalion energies for displacement of magnesium from sodium montmorillonite ranged from 36.000 J/mol to 103,000 J/mol. For reactions of illite with acids, reaction rate coefficients for displacement of aluminum were determined to be 1·45×10^-4Kg/mol-hr at 50^°C to 1·7×10^-3kg/mol-hr at 70^°C. Displacement of magneisum by acids from illite occurred at rates from 6·06 × 10^-4 kg/mol-hr at 50^°C to 5·97 × 10^-3 kg/mol-hr. Activation energies for reactions of acids with illite ranged from 33,000 J/mol to 62,000 J/mol for displacement of aluminum and from 9,400 J/mol to 29,000 J/mol for displacement of magnesium.     

Copper diffusion into silicon substrates through TaN and Ta/TaN multilayer barriers

A study of copper (Cu) diffusion into silicon substrates through Ta nitride (TaN) and tantalum (Ta/TaN) layers was investigated based on an experimental approach. TaN _x and Ta/TaN _x thin films were deposited by radiofrequency sputtering under argon (Ar) and Ar-nitrogen (N) plasma. The influence of the N₂ partial pressure on the microstructure and the electrical properties is reported. X-ray diffraction patterns showed that the increase of the N₂ partial pressure, from 2 to 10.7%, induces a change in the composition of the δTaN phase, from TaN to TaN_1.13, as well as an evolution of the dominant crystallographic orientation. This composition change is related to a drastic increase of the electrical resistivity over a N₂ partial pressure of 7.3%. The efficiency of TaN layers and Ta/TaN multilayer diffusion barriers was investigated after annealing at temperatures between 600 and 900 °C in vacuum. Secondary ion mass spectrometry profiles showed that Cu diffuses from the surface layer through the TaN barrier from 600 °C. Cu diffusion mechanisms are modified in the presence of a Ta sublayer. This article was presented at the Multicomponent-Multiphase Diffusion Symposium in Honor of Mysore A. Dayananda, which was held during TMS 2006, the 135th Annual Meeting and Exhibition, March 12–16, 2006, in San Antonio, TX. The symposium was organized by Yongho Sohn of the University of Central Florida, Carelyn E. Campbell of National Institute of Standards and Technology, Richard D. Sisson, Jr., of Worcester Polytechnic Institute, and John E. Morral of Ohio State University.     

Designing Camera Networks by Convex Quadratic Programming

In this paper, we study the problem of automatic camera placement for computer graphics and computer vision applications. We extend the problem formulations of previous work by proposing a novel way to incorporate visibility constraints and camera‐to‐camera relationships. For example, the placement solution can be encouraged to have cameras that image the same important locations from different viewing directions, which can enable reconstruction and surveillance tasks to perform better. We show that the general camera placement problem can be formulated mathematically as a convex binary quadratic program (BQP) under linear constraints. Moreover, we propose an optimization strategy with a favorable trade‐off between speed and solution quality. Our solution is almost as fast as a greedy treatment of the problem, but the quality is significantly higher, so much so that it is comparable to exact solutions that take orders of magnitude more computation time. Because it is computationally attractive, our method also allows users to explore the space of solutions for variations in input parameters. To evaluate its effectiveness, we show a range of 3D results on real‐world floorplans (garage, hotel, mall, and airport).     

Interactive frames constructed in Second Life meetings: a study in educational and professional settings

Based on the analysis of “real” Second Life meetings data, in educational and professional settings, our objective is to understand the actual uses of this kind of Virtual World and more particularly, the interactive frames constructed in SL meetings and their interrelation with uses of communication media. The originality of our analytical framework stems from the combination of two perspectives: a third view perspective based on analyses of observational data and a first view perspective based on users’ reports on their experience in SL. Our results highlight: boundaries between serious and recreational registers; avatar’s expression and attribution of feelings to the person “behind”; spatial positioning as indicators and constructors of roles and engagement; management of communication fluidity and joint focus; narrowing of communication media used for task focus content; emerging mediation role for management of fractured exchanges.     

Urban flood risk assessment using sewer flooding databases

Sustainable water management is a global challenge for the 21st century. One key aspect remains protection against urban flooding. The main objective is to ensure or maintain an adequate level of service for all inhabitants. However, level of service is still difficult to assess and the high-risk locations difficult to identify. In this article, we propose a methodology, which (i) allows water managers to measure the service provided by the urban drainage system with regard to protection against urban flooding; and (ii) helps stakeholders to determine effective strategies for improving the service provided. One key aspect of this work is to use a database of sewer flood event records to assess flood risk. Our methodology helps urban water managers to assess the risk of sewer flooding; this approach does not seek to predict flooding but rather to inform decision makers on the current level of risk and on actions which need to be taken to reduce the risk. This work is based on a comprehensive definition of risk, including territorial vulnerability and perceptions of urban water stakeholders. This paper presents the results and the methodological contributions from implementing the methodology on two case studies: the cities of Lyon and Mulhouse.     

Development and pilot testing of the Neuromuscular Blockade Advisory System

The neuromuscular blocker advisory system (NMBAS) is a computer program developed to provide advisory guidance to anesthesiologists on the timing and dose of rocuronium to paralyze patients during surgery. It is believed that the use of such a system will administer the minimally effective amount of drug, maintaining the patient in a state of paralysis that is useful for surgery yet easily reversible. This will improve patient safety and result in more efficient care. In this paper we present the NMBAS, its basic methodology, and its development though a pilot study. Novel methods of handling neuromuscular response data are presented, including relaxation measurement and the enhanced-train-of-four sensing modality. New methods of handling nonlinearities at the neuromuscular junction to allow application of adaptive control techniques are presented. A novel form of modelling combining model swapping and RLSE adaptation to accommodate the patient variation seen with NMB drugs is introduced. A pilot study testing the NMBAS was undergone to prepare the NMBAS for application in a full clinical trial, in which patients undergoing prostate brachytherapy surgeries using rocuronium for intubation were admitted.     

Exact methods and a heuristic for the optimization of an integrated replenishment-storage planning problem

In this paper we study the coordination of different activities in a supply chain issued from a real case. Multiple suppliers send raw materials (RMs) to a distribution center (DC) that delivers them to a unique plant where the storage of the RMs and the finished goods is not possible. Then, the finished goods are directly shipped to multiple customers having just‐in‐time (JIT) demands. Under these hypotheses, we show that the problem can be reduced to multiple suppliers and one DC. Afterwards, we analyze two cases; in the first, we consider an uncapacitated storage at DC, and in the second, we analyze the capacitated storage case. For the first case, we show that the problem is NP‐hard in the ordinary sense using the Knapsack decision problem. We then propose two exact methods: a mixed integer linear program (MILP) and a pseudopolynomial dynamic program. A classical dynamic program and an improved one using the idea of Shaw and Wagelmans are given. With numerical tests we show that the dynamic program gives the optimal solution in reasonable time for quite large instances compared with the MILP. For the second case, the capacity limitation in DC is assumed, which makes the problem solving more challenging. We propose an MILP and a dynamic programming‐based heuristic that provides solutions close to the optimal solution in very short times.     

On the chemical vapour deposition of Ti3SiC2 from TiCl4-SiCl4-CH4-H2 gas mixtures

In the ternary system Ti-Si-C, the ternary compound Ti₃SiC₂ seems to exhibit promising thermal and mechanical properties. Its synthesis as a thin film from the vapour phase is very difficult owing to the complexity of the system. A contribution to the knowledge of the CVD of Ti₃SiC₂ from a TiCl₄-SiCl₄-CH₄-H₂ gas mixture is proposed on the basis of a thermodynamic approach. This approach is based on a reliable estimation of Ti₃SiC₂ thermodynamic data in good accordance with recent experimental results on its thermal stability. A first equilibrium calculation for the deposition on an inert substrate shows the influence of the experimental parameters on the composition of both the deposit and the gas phase. As a result, the deposition of Ti₃SiC₂ can be favoured by an excess of TiCl₄ ( 45%), a rather low pressure (10–20 kPa), high temperature ( 1273 K) and low H₂ dilution ratio. On the basis of equilibrium calculations for various reactive substrates, complex mechanisms of Ti₃SiC₂ deposition are pointed out, with intermediate steps of substrate consumption, e.g. the formation of TiC from a carbon substrate or TiSi₂ from a silicon substrate.     

High Q 2D-length extension mode resonators for potential time–frequency applications

Microsystem Technologies - This paper presents recent advances on two dimensional length-extension mode (2D-LEM) quartz resonators providing high quality (Q) factor on resonances at a few MHz. The...     

Effect of thickness stretching and porosity on mechanical response of a functionally graded beams resting on elastic foundations

The novelty of this paper is the use of an efficient beam theory for bending, free vibration and buckling analysis of functionally graded material (FGM) beams on two-parameter elastic foundation. The present theory accounts for both shear deformation and thickness stretching effects by a parabolic variation of all displacements across the thickness, and satisfies the stress-free boundary conditions on the upper and lower surfaces of the beam without requiring any shear correction factor. Due to porosities, possibly occurring inside FGMs during fabrication, it is therefore necessary to consider the vibration, bending and buckling behaviors of beams having porosities in this work. The equation of motion for FGM beams is obtained through Hamilton’s principle. The closed form solutions are obtained by using Navier technique, and then fundamental frequencies are found by solving the results of eigenvalue problems. The validity of the present theory is investigated by comparing some of the present in literature. It can be concluded that the proposed theory is accurate and simple in solving the bending, free vibration and buckling behaviors of FGM sandwich beams.