Comparison of acids on the induction of an Acid Tolerance Response in Salmonellatyphimurium, consequences for food safety

Salmonellatyphimurium inactivation at pH 3.0 in Brain Heart Infusion (BHI) and Meat Extract (ME) was studied using stationary-phase cells grown in non-acidified BHI (pH 7.4) and ME (pH 6.6) and acidified BHI and ME at pH values of 6.4, 5.4 and 4.5 with acetic, ascorbic, citric, lactic, malic and hydrochloric acids. Cells grown in buffered BHI (pH 7.0) were used as non-acid adapted control cells.     

Contested landscapes: territorial conflicts and the production of different ruralities in Brazil

ABSTRACT

From the perspective of Brazilian agrarian geography, the conflicts generated by land tenure disputes have as protagonists the families of the Landless Workers’ Movement (Movimento dos Trabalhadores Rurais Sem Terra), traditional landowners, and agribusiness corporations. In this article, we present a reflection on land conflicts and the spatial and territorial production of latifundia, peasant smallholders, and large-scale agribusiness through studies of the landscapes of two municipalities in the state of São Paulo. Among the various tools for analysing territorial disputes, Google Earth can be used for local, regional, and international comparative studies of how landscapes have been transformed. Informed by traditional research, the article analyses a diversity of photographs, from satellite to field shots, as evidence of landscapes that express conflicting social relations in disputes over different models of social and territorial development.     

Industrial uses of geothermal energy a framework for application in a developing country

This paper presents a model of approach for agroindustrial development utilizing geothermal energy in an agriculturally based tropical developing country. Presented is the complexity of patterns in raw materials productivity, demand and the present problems of preserving their quality from biological deterioration thru drying.Utilization of a geothermal agroindustrial estate have to be carefully studied and programmed in reply to an almost constant heat demand profile consistent with seasonal available raw materials. This study uses the Tongonan Geothermal Field in Leyte Island as the model for presentation.     

Diffusivity of small molecules in polymers: Carboxylic acids in polystyrene

Gravimetry was used to study the diffusion of a homologous series of linear carboxylic acids (C_n, with n = 2, 6–16) in amorphous polystyrene at temperatures from 35 °C to 165 °C, that is, both below and above the polymer glass transition temperature of 100 °C. All the mass uptake results are well described by a simple Fickian model (for t < t_1/2) and were used to calculate the corresponding diffusion coefficients using the thin-film approximation. Acetic acid exhibits a peculiar diffusion rate: its diffusion coefficients in polystyrene do not follow the same trend of all the remaining acids, being smaller than those of hexanoic acid at the same temperatures. Polystyrene swells at a higher rate in hexanoic and octanoic acids than in acetic acid, at the same temperature. This peculiarity is confirmed using NMR spectroscopy for acetic and hexanoic acids. For all the carboxylic acids considered, the temperature dependence of the diffusion coefficients is non-Arrhenius in character. For each liquid penetrant, its log(D) increases linearly with the decrease in liquid viscosity associated with an increase in temperature. Plots of log(n²D) versus n suggest that higher-n carboxylic acids diffuse through a reptation-like mechanism at higher temperatures.     

Ceramic Microtubes from Preceramic Polymers

A novel process for the production of ceramic microtubes involving the microextrusion of preceramic polymers was studied. Microtubes with a wide range of inner and outer diameters and several centimeters long were produced from two silicone resins. A coextrusion approach was also used to extend the forming capability of the technique. The addition of carbon black resulted in electrically conductive silicon oxycarbide (SiOC) ceramic microtubes. SiOC microtubes possessed a high bending strength, ranging from ∼30–1100 MPa.     

Porous,Sintered Glass‐Ceramics from Inorganic Polymers Based on Fayalite Slag

The present paper deals with the synthesis of porous, sintered glass‐ceramics obtained at temperatures below 1150°C, originating from inorganic polymers based on fayalite slag. Firing led to the evaporation of water, dehydroxylation, and oxidation of Fe²⁺ above 345°C. For heating >700°C, the Si–O stretching band shifted from the 1160 and 750 cm^?1 to the 1255 and 830 cm^?1 region, due to a structural reorganization of the amorphous phase, whereas Fe–O bands appeared at 550 cm^?1. The final microstructure consisted predominantly of an amorphous phase, hematite, and franklinite. The open porosity and compressive strength decreased and increased, respectively, as the firing temperature increased. The final values suggest properties comparable to that of structural lightweight concrete, still, the materials synthesized herein, are lighter, and made primarily from secondary resources.     

Morphology and mechanical behavior of polypropylene hot plate welds

Polypropylene tensile bars were hot plate welded and analyzed by microscopy and mechanical tests. The welding process caused significant modifications to the microstructure and shape of the bars at the weld zone. The weld morphology was affected by both the welding parameters and the thermal history of the components. Oriented textures, coarse spherulites, voids or sharp notches occurring at the beads are the key morphological factors that affect the weld quality. Weld performance is dependent upon the type of testing method used. A tensile impact test has been shown to be potentially useful for quality control, as the fracture behavior is affected by the overall morphoiogy.     

LAS glass–ceramic scaffolds by three-dimensional printing

Highly porous (>60% open porosity) glass–ceramic scaffolds with remarkable mechanical properties (compression strength of ～15 MPa) were produced by indirect 3D printing. Precursor glass powders were printed into 3D ordered structures and then heat treated to sinter and develop crystalline phases. The final glass–ceramic contained a β-spodumene solid solution together with a secondary phase of lithium disilicate.The precision of the printed geometry and the density of the struts in the scaffold depended on several processing parameters (e.g. powder size and flowability, layer thickness) and were improved by increasing the binder saturation and drying time. Two types of powders with different particle size distribution (PSD) and flowability were used. Powders with a larger PSD, could be processed within a wider range of printing parameters due to their good flowability; however, the printing precision and the struts density were lower compared to the scaffolds printed using the powder in a smaller average PSD.