Hydroxyoctadecadienoic Acids Regulate Apoptosis in Human THP‐1 Cells in a PPARγ‐Dependent Manner

Macrophage apoptosis, a key process in atherogenesis, is regulated by oxidation products, including hydroxyoctadecadienoic acids (HODEs). These stable oxidation products of linoleic acid (LA) are abundant in atherosclerotic plaque and activate PPARγ and GPR132. We investigated the mechanisms through which HODEs regulate apoptosis. The effect of HODEs on THP‐1 monocytes and adherent THP‐1 cells were compared with other C18 fatty acids, LA and α‐linolenic acid (ALA). The number of cells was reduced within 24 hours following treatment with 9‐HODE (p < 0.01, 30 μM) and 13 HODE (p < 0.01, 30 μM), and the equivalent cell viability was also decreased (p < 0.001). Both 9‐HODE and 13‐HODE (but not LA or ALA) markedly increased caspase‐3/7 activity (p < 0.001) in both monocytes and adherent THP‐1 cells, with 9‐HODE the more potent. In addition, 9‐HODE and 13‐HODE both increased Annexin‐V labelling of cells (p < 0.001). There was no effect of LA, ALA, or the PPARγ agonist rosiglitazone (1μM), but the effect of HODEs was replicated with apoptosis‐inducer camptothecin (10μM). Only 9‐HODE increased DNA fragmentation. The pro‐apoptotic effect of HODEs was blocked by the caspase inhibitor DEVD‐CHO. The PPARγ antagonist T0070907 further increased apoptosis, suggestive of the PPARγ‐regulated apoptotic effects induced by 9‐HODE. The use of siRNA for GPR132 showed no evidence that the effect of HODEs was mediated through this receptor. 9‐HODE and 13‐HODE are potent—and specific—regulators of apoptosis in THP‐1 cells. Their action is PPARγ‐dependent and independent of GPR132. Further studies to identify the signalling pathways through which HODEs increase apoptosis in macrophages may reveal novel therapeutic targets for atherosclerosis.     

Development of organosilicone–polyurethanes as stone preservation and consolidation materials

Two organosilicone-modified polyurethanes are investigated as potential materials for the conservation and consolidation of natural stones. The materials are low molecular weight oligomers at the application stage and react with the humidity of the air to give polymers, forming continuous microlayers. The two differ in the length of the organosilicone chain, resulting in pronounced differences in their physical state: one forms a brittle glassy material (T_g ≈ 70°C). and the other, a soft rubbery material (T_g ≈ −100°C). The rate of the polymerization of the prepolymers was investigated at different conditions, showing a strong dependence on the presence of a catalyst and air humidity. Both these favorable conditions exist probably in the natural stone pores, enhancing the formation of the protective hydrophobic internal microlayer. © 1996 John Wiley & Sons, Inc.     

Solid-Phase Microextraction (SPME) of Pyrazines in Model Reaction Systems

Headspace solid-phase microextraction (HS-SPME) combined with gas chromatography (GC) was used for isolating and analysing pyrazines formed in a model system. This system consisted of an aqueous mixture of glucose, glycine and sodium hydroxide. Pyrazine formation was accelerated by heating in a microwave oven. Results were compared with our earlier ones using conventional techniques for isolation of pyrazines. HS-SPME-GC showed several advantages over traditional methods. The method is rapid, sensitive, easy to use and reproducible. Headspace and liquid of the model reaction were extracted and the results obtained using headspace sampling showed good agreement with the methylene chloride extraction method. In all cases, coefficients of variation of 5% or lower were obtained when the SPME extraction time was consistent.     

Synthese und Reaktionen chiraler,von (R)-(−)-bzw. (S)-(+)-2-Methoxymethylpyrrolidin abgeleiteter Dithiocarbamate

Synthesis and Reactions of Chiral Dithiocarbamates Derived from (R)-(−)- or (S)-(+)-2- The synthesis, diastereoselective alkylation reactions, dithiocarboxylation, and aldol condensation of several substituted methyl (R¹ CH₂) (S)-2-(methoxymethyl)-pyrrolidine-1-dithiocarboxylates (S)- 2 and of the corresponding (R)-derivatives (R)- 2 are described. The new enantiomeric dithiocarbamates (S) -2a – e , and (R) -2a – d are obtained by reaction of (S)-(+)-[(S) -1 ] or (R)-(−)-2-(methoxymethyl)-pyrrolidine [(R) -1 ], respectively, with carbon disulfide in dry methanol/anhydrous sodium acetate and the appropriate alkylating agent. The cyclic ketene dithioacetals (S) -3 and (R) -3 are formed by dithiocarboxylation procedure of (S) -2a and (R) -2a whereas (S) -6 and (R) -6 are obtained by aldol reaction with isobutyraldehyde. (S)- 2c , d and (R) -2c , d react in a diastereoselective manner after deprotonation with n-BuLi or LiTMP/LiBr at −78°C in THF with alkyl halides to the enantiomeric compounds 4a /ent -4a, 4b /ent -4b and 5 /ent -5 , respectively.     

Synthesis and SAR of Tetracyclic Inhibitors of Protein Kinase CK2 Derived from Furocarbazole W16

The serine/threonine kinase CK2 modulates the activity of more than 300 proteins and thus plays a crucial role in various physiological and pathophysiological processes including neurodegenerative disorders of the central nervous system and cancer. The enzymatic activity of CK2 is controlled by the equilibrium between the heterotetrameric holoenzyme CK2α₂β₂ and its monomeric subunits CK2α and CK2β. A series of analogues of W16 ((3aR,4S,10S,10aS)-4-{[(S)-4-benzyl-2-oxo-1,3-oxazolidin-3-yl]carbonyl}-10-(3,4,5-trimethoxyphenyl)-4,5,10,10a-tetrahydrofuro[3,4-b]carbazole-1,3(3aH)-dione ((+)- 3 a )) was prepared in an one-pot, three-component Levy reaction. The stereochemistry of the tetracyclic compounds was analyzed. Additionally, the chemically labile anhydride structure of the furocarbazoles 3 was replaced by a more stable imide ( 9 ) and N-methylimide ( 10 ) substructure. The enantiomer (−)- 3 a (K_i=4.9 μM) of the lead compound (+)- 3 a (K_i=31 μM) showed a more than sixfold increased inhibition of the CK2α/CK2β interaction (protein-protein interaction inhibition, PPII) in a microscale thermophoresis (MST) assay. However, (−)- 3 a did not show an increased enzyme inhibition of the CK2α₂β₂ holoenzyme, the CK2α subunit or the mutated CK2α′ ^C336S subunit in the capillary electrophoresis assay. In the pyrrolocarbazole series, the imide (−)- 9 a (K_i=3.6 μM) and the N-methylimide (+)- 10 a (K_i=2.8 μM) represent the most promising inhibitors of the CK2α/CK2β interaction. However, neither compound could inhibit enzymatic activity. Unexpectedly, the racemic tetracyclic pyrrolocarbazole (±)- 12 , with a carboxy moiety in the 4-position, displays the highest CK2α/CK2β interaction inhibition (K_i=1.8 μM) of this series of compounds.     

Comparative Effects of Deferiprone and Salinomycin on Lead-Induced Disturbance in the Homeostasis of Intrarenal Essential Elements in Mice

Lead (Pb) exposure induces severe nephrotoxic effects in humans and animals. Herein, we compare the effects of two chelating agents, salinomycin and deferiprone, on Pb-induced renal alterations in mice and in the homeostasis of essential elements. Adult male mice (Institute of Cancer Research (ICR)) were randomized into four groups: control (Ctrl)—untreated mice administered distilled water for 28 days; Pb-exposed group (Pb)—mice administered orally an average daily dose of 80 mg/kg body weight (BW) lead (II) nitrate (Pb(NO₃)₂) during the first two weeks of the experimental protocol followed by the administration of distilled water for another two weeks; salinomycin-treated (Pb + Sal) group—Pb-exposed mice, administered an average daily dose of 16 mg/kg BW salinomycin for two weeks; deferiprone-treated (Pb + Def) group—Pb-exposed mice, administered an average daily dose of 20 mg/kg BW deferiprone for 14 days. The exposure of mice to Pb induced significant accumulation of the toxic metal in the kidneys and elicited inflammation with leukocyte infiltrations near the glomerulus. Biochemical analysis of the sera revealed that Pb significantly altered the renal function markers. Pb-induced renal toxicity was accompanied by a significant decrease in the endogenous renal concentrations of phosphorous (P), calcium (Ca), copper (Cu) and selenium (Se). In contrast to deferiprone, salinomycin significantly improved renal morphology in Pb-treated mice and decreased the Pb content by 13.62% compared to the Pb-exposed group. There was also a mild decrease in the renal endogenous concentration of magnesium (Mg) and elevation of the renal concentration of iron (Fe) in the salinomycin-treated group compared to controls. Overall, the results demonstrated that salinomycin is a more effective chelating agent for the treatment of Pb-induced alterations in renal morphology compared to deferiprone.     

Lipoxygenase Products in the Urine Correlate with Renal Function and Body Temperature but not with Acute Transplant Rejection

Acute transplant rejection is the leading cause of graft loss in the first months after kidney transplantation. Lipoxygenase products mediate pro- and anti-inflammatory actions and thus we aimed to correlate the histological reports of renal transplant biopsies with urinary lipoxygenase products concentrations to evaluate their role as a diagnostic marker. This study included a total of 34 kidney transplant recipients: 17 with an acute transplant rejection and 17 controls. LTE4, LTB4, 12-HETE and 15-HETE concentrations were measured by enzyme immunoassay. Urinary lipoxygenase product concentrations were not significantly changed during an acute allograft rejection. Nevertheless, LTB4 concentrations correlated significantly with the body temperature (P ≤ 0.05) 3 months after transplantation, and 12- and 15-HETE concentrations correlated significantly with renal function (P ≤ 0.05) 2 weeks after transplantation. In conclusion, our data show a correlation for LTB4 with the body temperature 3 months after transplantation and urinary 12- and 15-HETE concentrations correlate positively with elevated serum creatinine concentrations but do not predict acute allograft rejection.     

Aerobic biodegradation of polyethylene glycols of different molecular weights in wastewater and seawater

In order to distinguish between aerobic biodegradation of synthetic polymers in fresh and seawater, polyethylene glycols (PEGs) were systematically and comparatively investigated in inocula from municipal wastewater and seawater aquarium filters for the first time. The molecular weight (MW) of the PEGs, (HO(CH(2)CH(2)O)(n)H, n=3-1350) as representatives of water-soluble polymers, ranged from 250 to 57,800Da. The biodegradation was observed by removal of dissolved organic carbon and carbon dioxide production by applying standardized ISO and OECD test methods. Specific analyses using liquid chromatography mass spectrometry (LC-MS) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) were performed. All PEGs selected were completely biodegradable in freshwater media within 65d. PEGs with an MW up to 14,600Da have a similar degradation pathway which is characterized by gradual splitting of C(2)-units off the chain resulting in formation of short-chain PEGs. In artificial seawater media, full biodegradation of PEGs up to 7400Da required more time than in freshwater. PEGs with MW 10,300 and 14,600Da were only partially degraded whereas PEGs with MW 26,600 and 57,800Da were not degraded for a period of 135d. The biodegradation pathway of PEG 250 and PEG 970 in seawater is similar to that for freshwater. For PEGs having an MW from 2000 to 10,300Da, the degradation pathway in seawater differs from the pathway of the shorter PEGs.