Fading Margin Analysis for Asynchronous CDMA Systems

In this paper, a detailed theoretical analysis of fading margin in an asynchronous code division multiple access (A-CDMA) system is discussed. Rayleigh and Rician frequency-selective slowly fading channels are considered. Probability distribution and density functions of the probability of error are derived for Rayleigh and Rician fading channels. The fluctuations in the channel capacity are proved to be directly proportional to the signal-to-noise ratio (SNR) variations. Fading margin is calculated for both Rayleigh and Rician fading channels as a function of the probability of error specification and the probability of unsatisfactory operation.     

Simulation studies on model reference adaptive controller based speed estimation technique for the vector controlled permanent magnet synchronous motor drive

This paper presents a speed estimation technique for the permanent magnet synchronous motor drive. A Model Reference Adaptive System (MRAS) has been formed using the instantaneous and steady-state reactive powers to estimate the speed. It has been shown that such unique MRAS offers several desirable features. The proposed technique is completely independent of stator resistance and is less parameter sensitive, as the estimation-algorithm is only dependent on q-axis stator inductance. Also, the method requires less computational effort as the simplified expressions are used in the MRAS. The stability of the proposed system is achieved through Popov’s Hyperstability criteria. Extensive simulation results are presented to validate the proposed technique. The system is tested at different speeds including zero speed and a very satisfactory performance has been achieved.     

MILD HYDROCRACKING OF VACUUM GAS OILS TO IMPROVE FCC PERFORMANCE AND MAXIMIZE DISTILLATE YIELDS

A pilot plant study was conducted on mild hydrocracking of heavy vacuum gas oils derived from two different crude sources over a commercially available catalyst to determine the possibility of utilizing mild hydrocracker bottoms as fluidized catalytic cracking feedstock along with improved middle distillate yields. The mild hydrocracking experiments were conducted at 390°C, 60 kg/cm², 1.0/h liquid hourly space velocity and H₂/oil ratio of 390 l/l in a pilot plant trickle bed reactor using two catalyst beds for pretreatment and mild hydrocracking reactions. The experimental results showed that mild hydrocracking would result in valuable middle distillates with low sulphur and nitrogen content. With research octane number of 78, the naphtha obtained from mild hydrocracking was found to be a good blending stock for gasoline pool. The middle distillate fraction (140-370°C) obtained from mild hydrocracking product was found to have cetane number in the range of 48-54. The bottom product from mild hydrocracking of heavy vacuum gas oils was found to be a good feedstock for fluidized catalytic cracking unit because of its low sulphur, nitrogen and aromatic contents. The data obtained from pilot plant studies showed that the processing of mild cracker bottom in FCC unit would result in better quality fuels.     

An appreciation of J.C. Bose's pioneering work in millimeter waves

The pioneering work in the area of millimeter waves, performed by J. C. Bose, a physicist from Calcutta, India, during 1894-1900, is reviewed and appraised. Various measurement techniques and circuit components, developed by him a hundred years ago, are still being used. The development of the electromagnetic horn, the point-contact detector, and the galena (semiconductor) detector of electromagnetic waves are attributed to the original research of J.C. Bose     

Starch urea formaldehyde matrix encapsulation of solid agrochemicals. I. Matrix synthesis and characterizations

A starch urea formaldehyde (starch-UF) matrix has been studied for application to the encapsulation of a solid insecticide. The pertinent parameters relating to the matrix synthesis have been identified and the influences of these parameters on release of the insecticide from the starch UF matrix have been investigated. The key parameter controlling the rate of release is the urea to starch ratio. It is shown that the release process can be described in terms of the generalized equation M_t/M_∞ = ktⁿ where k and n vary with system variables.     

A higher-order triangular plate bending element revisited

A new formulation of an eighteen-degrees-of-freedom higher-order triangular plate bending element using triangular area co-ordinates is presented. The displacement function w is taken as the complete fifth-order polynomial in area co-ordinates. The normal slope along an edge of the triangle is constrained to vary cubically. The twenty-one constants are expressed explicity in terms of eighteen degrees of freedom. The element stiffness matrix is expressed as a product of component matrices for which explicit expressions are developed and presented. No numerical inversion or integration is necessary. The formulation is expected to be useful specially for microcomputers.     

An algorithm for optimal assignment of a wavelength in a tree topology and its application in WDM networks

In this paper, we present a polynomial time algorithm that gives an optimal solution to the routing and wavelength assignment (RWA) problem in a tree topology. One of the major design issues in wavelength-division multiplexed networks is the assignment of the limited number of wavelengths among network stations so that greater capacity can be achieved. The problem of RWA is known to be NP-hard problem. Many researchers have tackled the problem of RWA with a number of efficient heuristic algorithms. This paper presents an algorithm that optimally assigns a single wavelength to maximize one-hop traffic in a tree topology. The algorithm uses dynamic programming and is shown to be optimal with a time complexity of O(N/sup 4/). We also propose a heuristic scheme to use our optimal algorithm for wavelength assignment in a general graph. The heuristic works on the tree subgraphs of a given graph and the remaining spare wavelengths can be assigned with an existing RWA policy.     

Exergy analysis of a coal‐based 210 MW thermal power plant

In the present work, exergy analysis of a coal‐based thermal power plant is done using the design data from a 210 MW thermal power plant under operation in India. The entire plant cycle is split up into three zones for the analysis: (1) only the turbo‐generator with its inlets and outlets, (2) turbo‐generator, condenser, feed pumps and the regenerative heaters, (3) the entire cycle with boiler, turbo‐generator, condenser, feed pumps, regenerative heaters and the plant auxiliaries. It helps to find out the contributions of different parts of the plant towards exergy destruction. The exergy efficiency is calculated using the operating data from the plant at different conditions, viz. at different loads, different condenser pressures, with and without regenerative heaters and with different settings of the turbine governing. The load variation is studied with the data at 100, 75, 60 and 40% of full load. Effects of two different condenser pressures, i.e. 76 and 89 mmHg (abs.), are studied. Effect of regeneration on exergy efficiency is studied by successively removing the high pressure regenerative heaters out of operation. The turbine governing system has been kept at constant pressure and sliding pressure modes to study their effects. It is observed that the major source of irreversibility in the power cycle is the boiler, which contributes to an exergy destruction of the order of 60%. Part load operation increases the irreversibilities in the cycle and the effect is more pronounced with the reduction of the load. Increase in the condenser back pressure decreases the exergy efficiency. Successive withdrawal of the high pressure heaters show a gradual increment in the exergy efficiency for the control volume excluding the boiler, while a decrease in exergy efficiency when the whole plant including the boiler is considered. Keeping the main steam pressure before the turbine control valves in sliding mode improves the exergy efficiencies in case of part load operation. Copyright © 2006 John Wiley & Sons, Ltd.     

Randomized Trial of Cognitive-Behavioral Therapy for Chronic Posttraumatic Stress Disorder in Adult Female Survivors of Childhood Sexual Abuse.

The authors conducted a randomized clinical trial of individual psychotherapy for women with posttraumatic stress disorder (PTSD) related to childhood sexual abuse (n = 74), comparing cognitive-behavioral therapy (CBT) with a problem-solving therapy (present-centered therapy; PCT) and to a wait-list (WL). The authors hypothesized that CBT would be more effective than PCT and WL in decreasing PTSD and related symptoms. CBT participants were significantly more likely than PCT participants to no longer meet criteria for a PTSD diagnosis at follow-up assessments. CBT and PCT were superior to WL in decreasing PTSD symptoms and secondary measures. CBT had a significantly greater dropout rate than PCT and WL. Both CBT and PCT were associated with sustained symptom reduction in this sample. (PsycINFO Database Record (c) 2010 APA, all rights reserved)