Experimental methods in chemical engineering: X‐ray photoelectron spectroscopy‐XPS

X‐ray photoelectron spectroscopy (XPS) is a quantitative surface analysis technique used to identify the elemental composition, empirical formula, chemical state, and electronic state of an element. The kinetic energy of the electrons escaping from the material surface irradiated by an x‐ray beam produces a spectrum. XPS identifies chemical species and quantifies their content and the interactions between surface species. It is minimally destructive and is sensitive to a depth between 1–10nm. The elemental sensitivity is in the order of 0.1 atomic %. It requires ultra high vacuum ( Pa) in the analysis chamber and measurement time varies from minutes to hours per sample depending on the analyte. XPS dates back 50 years ago. New spectrometers, detectors, and variable size photon beams, reduce analysis time and increase spatial resolution. An XPS bibliometric map of the 10 000 articles indexed by Web of Science^[1] identifies five research clusters: (i) nanoparticles, thin films, and surfaces; (ii) catalysis, oxidation, reduction, stability, and oxides; (iii) nanocomposites, graphene, graphite, and electro‐chemistry; (iv) photocatalysis, water, visible light, and ; and (v) adsorption, aqueous solutions, and waste water.     

Analysis of surface integrity for minimum quantity lubricant—MQL in grinding

The quality of machined components is currently of high interest, for the market demands mechanical components of increasingly high performance, not only from the standpoint of functionality but also from that of safety. Components produced through operations involving the removal of material display surface irregularities resulting not only from the action of the tool itself, but also from other factors that contribute to their superficial texture. This texture can exert a decisive influence on the application and performance of the machined component. This article analyzes the behavior of the minimum quantity lubricant (MQL) technique and compares it with the conventional cooling method. To this end, an optimized fluid application method was devised using a specially designed nozzle, by the authors, through which a minimum amount of oil is sprayed in a compressed air flow, thus meeting environmental requirements. This paper, therefore, explores and discusses the concept of the MQL in the grinding process. The performance of the MQL technique in the grinding process was evaluated based on an analysis of the surface integrity (roughness, residual stress, microstructure and microhardness). The results presented here are expected to lead to technological and ecological gains in the grinding process using MQL.     

Generation and interpretation of parsimonious predictive models for load forecasting in smart heating networks

Applied Intelligence - Forecasting future heat load in smart district heating networks is a key problem for utility companies that need such predictions for optimizing their operational activities....     

Foreign bodies in the gastrointestinal tract. Our cases and a review of the literature

The ingestion or introduction of foreign bodies is a common situation in emergency surgery. The patients who usually ingest foreign bodies for different reasons are children, psychotics, alcoholics, prisoners and old people. The authors analyzed 65 cases observed in the I Institute of Surgery of the University of Rome "La Sapienza": 45 males and 20 females. Both the anal introduction and ingestion may be accidental or voluntary. The incidence of complications is estimated about 5 to 7%. The authors underline the opportunity of a conservative removal through endoscopic procedures especially for intraesophageal corps. This procedure is recommended to reduce morbidity and mortality rates, as well as hospitalization and social costs.     

Assessment of the EEG complexity during activations from sleep

The present study quantitatively analyzes the EEG characteristics during activations (Act) that occur during NREM sleep, and constitute elements of sleep microstructure (i.e. the Cyclic Alternating Pattern). The fractal dimension (FD) and the sample entropy (SampEn) measures were used to study the different sleep stages and the Act that build up the sleep structure. Polysomnographic recordings from 10 good sleepers were analyzed. The complexity indexes of the Act were compared with the non-activation (NAct) periods during non-REM sleep. In addition, complexity measures among the different Act subtypes (A1, A2 and A3) were analyzed. A3 presented a quite similar complexity independently of the sleep stage, while A1 and A2 showed higher complexity in light sleep than during deep sleep. The current results suggest that Act present a hierarchic complexity between subtypes A3 (higher), A2 (intermediate) and A1 (lower) in all sleep stages.     

Counting clicks and beeps: Exploring numerosity based haptic and audio PIN entry

Haptic and audio cues now appear commonly in computer interfaces, partially due to inherent advantages such as their support for eyes-free interaction. Their invisible, unobservable nature also makes them ideal candidates for security interfaces in which users have to enter secret information such as passwords. In particular, researchers have explored this idea through the design of PIN entry authentication systems based on multi-modal combinations of visual and non-visual content or on the recognition of small sets of unimodal haptic or audio stimuli. This paper highlights the benefits and performance limitations of these approaches and introduces an alternative based on unimodal audio or haptic temporal numerosity – the ability to accurately and rapidly determine the number of cues presented in rapid temporal succession. In essence, in a numerosity interface, rather than recognizing distinct cues, users must count the number of times that a single cue occurs. In an iterative process of design and evaluation, three prototypes implementing this concept are presented and studies of their use reported. The results show the fastest PIN entry times and lowest error rates to be 8 s and 2%, figures that improve substantially on previous research. These results are attained while maintaining low levels of workload and substantial resistance to observation attack (as determined via camera attack security studies). In sum, this paper argues that unimodal audio and haptic numerosity is a valuable and relatively unexplored metaphor for non-visual input and demonstrates the validity of this claim in the demanding task of unobservable authentication systems.     

Design considerations for fractional-slot winding configurations of synchronous machines

This paper presents some design considerations for synchronous machines characterized by a fractional number of slots per pole per phase. The main advantage of this configuration is a smooth torque, which is due to the elimination of periodicity between slots and poles. A second advantage is a higher fault-tolerant capability, making the machine able to work even in faulty conditions. However, the fractional-slot configuration presents a high content of MMF harmonics that may cause an unbalanced saturation and thus an unbearable torque ripple. A method to design fractional-slot machines is illustrated in this paper, including double-layer and single-layer windings. The analytical computation is extended to determine the harmonics of MMF distribution. Their effect is highlighted in isotropic as well as anisotropic machines. Finally, some considerations are reported to avoid unsuitable configurations.     

Design of a fault-tolerant IPM motor for electric power steering

This paper deals with the design of an interior permanent magnet (IPM) motor for power steering. Such an application requires an imperative fault-tolerant capability that is obtained by means of a redundant solution with two motors on the same shaft. A ball-screw system converts the rotating movement into the linear movement of the steering rack. In addition, the IPM motor has to exhibit very low braking torque after a short-circuit fault. Useful relationships between the maximum braking torque and the motor parameters are found and used in the design of the motor.     

Iterative reengineering of legacy systems

During its life, a legacy system is subjected to many maintenance activities, which cause degradation of the quality of the system: When this degradation exceeds a critical threshold, the legacy system needs to be reengineered. In order to preserve the asset represented by the legacy system, the familiarity with it gained by the system's maintainers and users, and the continuity of execution of current operations during the reengineering process, the system needs to be reengineered gradually. Moreover, each program needs to be reengineered within a short period of time. The paper proposes a reengineering process model, which is applied to an in-use legacy system to confirm that the process satisfies previous requirements and to measure its effectiveness. The reengineered system replaced the legacy one to the satisfaction of all the stakeholders; the reengineering process also had a satisfactory impact on the quality of the system. Finally, this paper contributes to validate the cause-effect relationship between the reengineering process and overcoming the aging symptoms of a software system.     

The use of EEG modifications due to motor imagery for brain-computer interfaces

The opening of a communication channel between brain and computer [brain-computer interface (BCI)] is possible by using changes in electroencephalogram (EEG) power spectra related to the imagination of movements. In this paper, we present results obtained by recording EEG during an upper limb motor imagery task in a total of 18 subjects by using low-resolution surface Laplacian, different linear and quadratic classifiers, as well as a variable number of scalp electrodes, from 2 to 26. The results (variable correct classification rate of mental imagery between 75% and 95%) suggest that it is possible to recognize quite reliably ongoing mental movement imagery for BCI applications.